Tender For Furnishing Of Cuttack Netaji Bus Terminal At Khannangar, Cuttack- Furniture, cuttack-Odisha

Furnishing Of Cuttack Netaji Bus Terminal At Khannangar, Cuttack- Furniture , Reception Table 2 Arc Rubberwood Top Of Godrej Make , Top Shall Be Of Rubberwood With Clean Matt Pu Finish 18 Mm Thick , Inside Radius - 700 Mm , Outside Radius - 1350 Mm And Depth - 650 Mm . Cork Shall Be 18 Mm Thick Of Rubber . Glass Shall Be Frostered 10 Mm Thick Diamond Cut Finishing On Edges , Inside Radius Shall Be - 1202.5 Mm , Otside Radius - 1402.5 Mm And Depth - 200 Mm . The Modesty Panel Shall Be Ms Perforated Sheet Below Worksurface : 0.8 Mm (Thick) X 665 Mm ( Height) X 1345 Mm (Flat Length ) . Above Worksurface : 0.8 Mm (Thick ) X 260 Mm (Height)X 1345 Mm (Flat Length) . The Legs Shall Be Of Ms Tube 1.6 Mm Thick Diameter 50.8 Mm And Height 604 Mm , Oxbo Mid Back Of Godrej Make , Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (W) X 48.0 Cm. (D)Back Assembly: The Back Asembly. Should Bemade Of Powder Coated (Oft 40-60 Microns)Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm (W) X 60.5 Cm (H)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. Tilt Tension Adjustment. .Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm.Elescopic Bellow Assy: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors.)Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon.Overall Dimensions Of Chair-Seat Height - Min 43.3 To Max 54.3Cm. Height - Min 89.5 To Max 100.5Cm.Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Maestro Of Godrej Make , Maestro Main Desk Oxford Cherry The Main Desk Of Maestro Shall Be Of Size 1800 Width Mm X 900 Depth Mm X 750 Height Mm.The Table Top Shall Be 25 Mm Thick Mfc (Melamine Faced Chipboard) Also There Should Be 30 Mm Mdf (Medium Density Fiberboard) Black Pad.The Modesty Panel Shall Beof18 Mm Thick Mfc (Melamine Faced Chipboard).The Leg Of The Main Desk Shall Be Of 25 Mm Mfc Plus 30 Mm Mdf Right And Left Pad.The Main Table Should Be Ofduck Noise Profile Edge In Order To Enhance The Workspace Aesthetics. , Maestro Joining Table Rhs The Maestro Joining Table Rhs Shall Be Of Size 1200 Width Mm X 1050 Depth Mm X 750 Height Mm.The Top Panel Shall Be 25 Mm Thick With Mfc (Melamine Faced Chipboard).The Leg Of The Joining Table Shall Be Of Metal.Polyurethane Coated Joining Table. , Maestro Mobile Pedestal Oxford Cherry The Maestro Mobile Pedestal Size Shall Be 400 Width Mmx 560 Depth Mm X 560 Height Mm.The Top Panel Shall Be 25 Mm Thick Mfc ( Melamine Faced Chipboard) Plus All The Other Panels Shall Be 18 Mm Thick Coated With Mfc (Melamine Faced Chipboard). In Mobile Pedestalall Other Panels Shall Be Of 18 Mm Thick Mfc(Melamine Faced Chipboard).In Mobile Pedestal Lock And Castors Shall Be Provided. The Handle Shall Be Of Metal. , Maestro Return Desk The Maestro Return Desksize Shall Be 1200 Width Mm X 600 Depth Mm X 730 Height Mm.The Top Panel Shall 25 Mm Thick Mfc ( Melamine Faced Chipboard) .The Modesty Panel Shall Be 18 Mm Thick Mfc Coated. The Leg Of The Return Desk Shall Be 25 Mm Thick Mfc (Melamine Faced Chipboard)Plus The Right And Left Pad Should Be 30 Mm Thick Mdf (Medium Density Fiber ) Coated. , Maestro Bookcase The Maestro Bookcase Size Shall Be 790 Width Mm X 400 Depth Mm X 2200 Height Mm.The Top Panel Shall Be 25 Mm Thick Mfc (Melamine Faced Chipboard)Plus The Bottom Panel Shall Be 25 Mm Mfc Coated.The Wood Door Panels Shall Be 18 Mm Thick Mfc .The Glass Door Panels Shall Be Of 5 Mm Thick Plus All The Other Panels Shoul Be 18 Mm Thick Mfc (Melamine Faced Chipboard).The Handles Shall Be Of Metal.The Bookcase Unit Provides Ample Amount Of Storage. , Maestro Back Unit Oxford Cherry The Maestro Back Unit Size Shall Be 1400 Width Mm X 470 Depth Mm X 760 Height Mm.The Top Panel Size Shall Be 25 Mm Thick Mfc (Melamine Faced Chipboard). The Door Panels And All Other Panels Should Be 18 Mm Thick Mfc (Melamine Faced Chipboard) .The Handle Shall Be Of Metal. , Marvel High Back Of Godrej Make , 1) Seat Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. *Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D) 2) Back Assembly: The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. High Back Size: 47.7 Cm. (W) X 76.4 Cm 3) Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. 4) Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. 5) Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. 6) Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. 7) Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. 8) Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) 9) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. , Finnesse Table-5026 + Eru 3616+Free Standing Ped With Castors For Finnesse Table+Finnesse Hdu-4315 Of Godrej Make , Table-1500 X 750 X 740 Eru-1050 X 450 X 705 Ped-646H X 390W X 440D Hdu-1280 X 425 X 705 Finesse Table - 5026Size Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm .Table Top Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate (Bdl) .Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading.The Modesty Shall Be 18 Mm Thick Plain Particle Board ( ) Ppb Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. Finesse Eru -3616 Lhs Size Shall Be 1050 Widthx 450 Depthx 705 Height. The Top Offinesse Eru -3616 Lhs Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate ( Bdl).Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. The Modesty Shall Be 18 Mm Thick Plain Particle Board (Ppb) Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. Overall Dimensions Of Free Standing Ped With Castors For Finnesse Table Shall Be 390Mm(W)X440mm(D)X646mm(H). The Construction & Material Used Shall Be Welded Assembled , 0.8 Mm Thick Crca For Body Shell , Drawer Front & Tray , Front Side Stiffener ,Rear Aide Stiffener And 1.2 Mm Thick Crca Top Stiffener & Bottom Stoffener . The Drawer Fronts Shall Be Metal Front Straight Edge . Locking Shall Be 10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism For Box-Box-File Pedestal . The Top Panel Shall Be Metal Straight Edge Top . Castor Should Be Swiveling Non - Lockable Castors Mounted Below The Body Shell For Free Standing Full Height Mobile Pedestal And M8 Leveling Stud For Free Standing Pedestal . The Anti-Tipping Mechanism Shall Have Fifth Roller Arrangement Mounted Below File Drawer To Avoid Toppling Of Unit When File Drawer Is Pulled Out . Partition In Drawer Shall Be 1 No. Partition In Box Drawers With Lock Mounted . Plastic Pencil Tray Shall Be Optional Accessory . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Application Shall Be Suitable For Pushing Below Work Surface Which Has Got A Clear Height Of 725 Mm From Below . For Drawer Pulling Side Wise Tapered Recess Provided In Shell Behind Drawer Fronts . Finesse Hdu - 4315 Sizeshall Be 1280 Widthx 425 Depthx 705 Height. Top Offinesse Hdu - 4315 Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate ( Bdl).Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. The Modesty Shall Be 18 Mm Thick Plain Particle Board (Ppb) Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. , Pulse Mb Seat, Adj. Arms Larger Seats Of Godrej Make , Seat/Back Assembly: The Seat Should Bemade Up Of 1.2 ± 0.1Cm Thk. Hot Pressed Plywoodocp-Qlta-Pl14-18.The Back Should Bemade Up Of Injection Moulded Glass Filled Nylon & Upholstered Using Net Fabric With High Tenacity Yarn. Seat Size: 47.0 Cm. (W) X 51.5 Cm. (D) Back Size :45.0 Cm. (W) X 65.3 Cm. (H)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =55+/-2 Kg/M³ And Hardness 16 ± 2 Kgffor 25% Compression. Armrests : The Armrests Have An Up-Down Adjustment Of 8.5 ± 0.5Cm Which Should Beprovided In Armrest Structure. Armrest Top Has An Integrated Layer Of Thermoplastic Elastomer (Tpe). Lumbar Support Assembly: The Lumbar Support Consshould Be Ts Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad. Lumbar Pad Has An Adjustment Of 8.0 ± 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features. • 360° Revolving Type. • Single Point Control. • Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. • Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat/Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3 Cm. Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Should Beø66.1 ± 0.5 Cm (76.1 ± 1.0 Cm. With Castors).Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon.Seat Size: 47.0 Cm. (W) X 51.5 Cm. (D)Back Size: 45.0 Cm. (W) X 65.3 Cm. (H). , Aristo Tbl Lh 1200 X 600 Of Godrej Make , 1200X600x750 Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Gromet Provided On Work Surface For Wire Management Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Handle Is Provided For Ease Of Opening. Storage Is Provided With Cam Lock For Security. , Work 5026 Of Godrej Make , Work - 5026 Size Shall Be1500 Width X 750 Depth X 740 Height . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board . Allthe Edges Are Sealed With 2 Mm Thick Pvc Edge Band All Around . Side Panels Shall Be Made From 25 Mm Thick Pre- Laminated Paticle Board . All The Edges Are Sealed With 2 Mm Thick Pvc Edge Band On Theuser Side And 0.8 Mm On The Top And Bottom Side .The Side Panels Have 2 Glide Screws Each For Levelling Of The Desk. Modestypanel Shall Be Made From 18 Mm Thick Pre- Laminated Particle Board . All The Edges Are Sealed With 0.8 Mm Thick Pvc Edge Band All Around. Freestanding Pedestal Shall Be Made From 18 Mm Pre- Laminated Particle Board With A Combination Of 2 Mm And 0.8 Mm Pvc Edge Band On All The Exposed Surfaces As Per Requirement . The Drawers Are Provided With Suitable Slides For Smooth Operation . All The Pedestal Drawers Are Centrally Locked With A Single Key. , Wish Workstations Of Godrej Make , Intermediate Blocks Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Legs - Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Worksurface - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1200 Mm W X 600 Mm D. & 1500 Mm W1 X 1500 Mm W2 X 600 Mm D Pedestals- Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Kbpt With Mousetray - Metal Cpu Trolley - With Castors , Matrix 2 Seater Noarm With Grouting Of Godrej Make , The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. Seat Size : 47.8 Cm (W) X 44.6 Cm (D)Back Size : 41.6 Cm (W) X 23.0 Cm (H) Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As - Width-114.5Cm And Depth-63.8 Cm. , Waiting Seating Bench (3 Seater) Of Godrej Make , Matrix 3 Seater Noarm With Grouting 1) Seat Shell : The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. Seat Size : 47.8 Cm (W) X 44.6 Cm (D)Back Size : 41.6 Cm (W) X 23.0 Cm (H) 2) Understructure Assembly: Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment. , Mingle Pod Plt Pebble _1000X1000 St Of Godrej Make , 1000(Dia) X 740 Work Surface-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Soft Closing Access Flap Provided For Access To Power Supply And Audio Cables. Work Top Is Available In Two Shapes Square And Pebble (Round) Side Panel-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990 Matching To The Worktop, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Cutout With Gromet Provided For Routing Cables In Case Any Audio Visual Equipment Is To Be Fixed Later. Understructur-The Under-Structure Consists Of An Inner Tube Assembly With Top For Worktop Mounting And Base Plate With Levellers. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates (Hr) (As Per Is: 2062) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates (Hr) (As Per Is:2062). The Inner Tube Assembly Is Made Of 25.4Mmx 25.4Mm X 1.2Mm Thk Round Electric Resistant Welded Tube (Erw)(As Per Is:7138) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epoxy Polyester Powder Coated (Dft 40-60 Microns). The Product Has A Knock-Down Construction. Cutout For Standard Anchor Roma 6 Module Is Provided For Electrical Fittings.An Additional Cutout With A Plate Is Provided For Mounting Audio Visual Cables( Eg Hdmi,Vga-A,Etc.) Removable Panel-The 3D Removable Panels Are Provided For Ease Of Servicibility. It Also Provides Easy Access To Internal Space In Case Of Any Audio Visual Equipment Is To Be Added Later. It Is Made Of 1.2Mm Crca Ms Is:513 And Epoxy Polyester Powder Coated (Dft 40-60 Microns). , Ayush Lite Sheet Bed Without Castors With Fixed Head Board / Foot Board In Ms Of Godrej Make , Over Allouter Dimension(L) 2230 X (W) 900 X (H) 614Mm. Head Board And Foot Board Havingcurved Profileat The Top Made Of Ms Erw Round Tubes Of Thickness 1.2 Mm & Dia 31.75 Mm. Head Board And Leg Board Is Further Strengthned By 3 Vertical Pipes Each Of Thickness 1.2 Mm And Dia Of 19Mm &1 Each Horizontal Pipe Of Thickness 1.2Mm And Dia Of 25.4Mm. The Head And Leg Board Have 4 Nos Mosquioto Pole Holder. Lying Surface Is Made Of Crca Sheet Of Thickness Of 1 Mm. It Is Strengthned Bytrapizodal Contour (Rounded Corner) 10 Nos, Embossed Cut Out. All Metal Componentsare Pre Treated With Zinc Phosphating And Then Powder Coated With Epoxy Polyster Powder Coating.Goods Are Supplied In Knocked Down Construction To Reduce Carbon Emission.Ensuring Qood Quality Welding Co2 Argon Process Is Adhered. Leg Shoe Tpe ( Thermo Plastic Elastomer)With Reinforced Metal Washer Are Used For Leg Shoes. Maximum Safe Patient Working Load Is 135 Kg. , Height Adjustable Ss Top Round Stool Of Godrej Make , Overall Dimension: Overall Sizes Diagonal Legdia 538 Mmh470 Min-655Max. Top Platemade Of Ss 202 Made Sheet With Spin Section Of Thickness 1Mm & Non Corrosive. It Has A Diameter Of 305Mm, Seat Basemade Of Ms Ring And Rectangular Tube. En8 Screw Having Dia Of 22 Mm Is Used For Height Adjustment Of The Seat Base. The Round Hubmade Of Ms Erw Tube Having Dia Of 38Mm And Thickness 2 Mm.The Hub Is Welded With The Legs And Itaccommodate And Cover The Lead Screw Mechanism.The Under-Structure Consist Of 4 Legs Made Up Ofms Erw Tube Of Diameter 25.4 Mm And 1.6Mm Thick. The Press Formed Pipe Leggive A Round & Clean Look. All The Legs Is Provisionided With 4 Nos Of Nylon-6 Bush. All Metal Componentsare Pre Treated With Zinc Phosphating In 9 Tank Process And Then Powder Coated With Anti Microbialepoxy Polyester Powder Coatingto Fulfill The Requirements For Bacterial Protection Against At Least 2 Commonly Found Bacteria In Hospital Environment [Gram Positive And Gram Negative]. Safe Working Load Is 135Kg , Time Out 4 Seater Pu Coated Of Godrej Make , 1135 X 1175 X 750 Time Out 4 Seater Pu Coated Size Shall Be1135 Width Mmx 1175 Depth Mmx 750 Height Mm. Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . , Time Out 6 Seater Pu Coated Of Godrej Make , 1734 X 1175 X 750 Time Out 6 Seater Pu Coated Size Shall Be1734 Width Mmx 1175 Depth Mmx 750 Height Mm.Top Shall Be 25 Mm Thick Base Material Shall Be 25 Mm Mdf Board . On Top Pu Painting Of Minimum 2H Hardness With 75% Glass As Per Color Chart .Combination Color Graphics On The Centre . Brown Laminate On Bottom Specially Profiled Edges For Comfort . The Understructure Shall Be Having Bend Pipe Structure Of Ms Powder Coated . Pipe Dia 38 Mm , 2 Mm Thick And It Shall Be Fitted With Top By Ss Machine Screws . Legs Shall Be Of Ms Powder Coated And 38 Mm Dia. Pipe Legs Are Fixed With Inderstructure And Table Top . Glide Shall Be Of Plastic Fixed At The Understructure To Prevent The Damage Of Table Top During Stacking . , Café Pod With Mdf Top Pu Coated) Of Godrej Make , 800 X 800 X 745 Cafépod With Mdf Top Pu Coated Size Shall Be800 Widthx 800 Depth Mm X 745 Height Mm . Top Shall Be Of Mdf 25 Mm Thick Size : 800 Mm X 800 Mm X 25 Mm . Painted In Yellow ,Red,Orange,Wine,Biege Pu Coating On A Sealer Coat . Pu Coating Done On Both Top And Bottom Surfaces . Pu Coating Has A Hardness Of 3H . Top Is Fitted To The Understructure With No. 8 X 16 Plilip Head Screw . Understructure Shall Be Foldable And Stackable , Made With Combination Of Aluminium And Plastic . Centre Column Is Of Aluminium Extrusion Of Diameter 70 Mm , Which Is Anodized . Base Is Made In 2 Pieces Of Die Cast Aluminium With Buffed Finish . It Is Bolted Together With Centre Column And Top Flange . , Unwind Of Godrej Make , Ms Understructure The Seat And Back Are Made Uo Injection Moulded High Impact Strenght Polypropylene Polymer Compound With Indoor Graade Uv Resistance. The Powder Coated (Dft50+ Microns) Weled Tubular Frame Is Made From 2.22 + 0.03 Cm X 0.16+/- 0.0128Cm And 3.5+/- 0.03 Cmx1.5+/-0.03 Cm X 0.16 +/- 0.0128 Cm M.S.E.R.W Tubthe Shoes Are Made Of High Impact Strenght Polypropylene Polymer Compond With Indoor Grad Uv Resistance And Pressed Fitted With Tubularfram. Size : (W)52.5Cm*(D)55.8Cm*(H)84.5Cm*(Seat H) 45.0 Cm Seat Size 52.5Cm(W)*53.2 Cm(D).Back Size 51.6 Cm(W)*40.5 Cm (H) , Swing Dustbin 14 X 28 Of Godrej Make , Specifications – Diameter 14 Inch X Height 28 Inch Thickness - 0.40Mm Volume – 65 Litres Material – Ss 200 , Aristo Tbl Lh 1350 X 600 Of Godrej Make , 1350X600x750 Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Gromet Provided On Work Surface For Wire Management Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Handle Is Provided For Ease Of Opening. Storage Is Provided With Cam Lock For Security. , Supreme Ad 1 Str Sofa Fab Dark Brown Of Godrej Make , Overall Size :Width: 87.5Cmdepth : 78Cm Height : 81.5Cm Seating Height : 38Cmupholstery:Material : Pvc .Shade : Black ,Thickness : 1 Mm ,Weight (Gsm) : 575 ,Tear Strength (Kg/5Cm) : Wrap : 34.1 Weft : 19.78 ,Breaking Strength (Kg/Cm2): Wrap : 3.92 Kg Weft : 2.59 Kg ,Adhesion Of Coating Kgf/5Cm : Warp : 3.05 Kg Weft : 3.02 Kg , Colour Fastness To Rubbing (Dry/Wet) (Scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture Content : 10 -12 % ,Thickness Of Plywood Used : 12 Mm & 18 Mmseat Foam :Material : Slab Stock ,Density : 32 Kg/M3 At Seat And 28 Kg/M3 At Backwebbing : Material : Nylon Thickness : 2 Mmlegs Material : Pvc With 4 Mm Bush , Meraki Coffee Table Brown/Beige Of Godrej Make , Overall Size : Width : 120Cmdepth : 60Cm Height : 36.7Cm Materials : All Carcass Panel Are Made Of 18 Mm Prelaminated Particle Board With Edge Banding 1.5 Mm Thickness.Drawer Bottom Is Made Of .9 Mm Thick Prelaminated Particle Board .Drawer Front Is Made Of 18 Mm Thick Pu Painted Mdf . Legs : Rubber Wood . Hardware : Hettich . Construction : Knock Down .Finish :All 18 Mm Prelaminated Particle Board Panels Are Noce Versaillies With Walnut Edge Band. Pu Lamination Is High Gloss In Ecru Shade .Packets : 1 Nos . Materials : All Carcass Panel Are Made Of 18 Mm Prelaminated Particle Board With Edge Banding 1.5 Mm Thickness. Hardware : Hettich . Construction : Knock Down .Finish : • All 18 Mm Prelaminated Particle Board Panels Are Noce Versaillies With Walnut Edge Band . Pu Lamination Is High Gloss In Ecru Shade .Packets : 1 Nos , Duplexx Bed Of Godrej Make , Width : 2100Mm.Depth:915Mm,Overall Height:2400Mm, Bed With Provisions For Musquito Rod , Hero Mat 78 36 4 Of Godrej Make , Hero Mat 78 36 4 Thickness 50 Mm.Quilting Material-Pu Foam.Density Of Quilting Material (± 2 Kg/M3)-18 Kg/M3.Mattress Top-Box Type. Cover-Fabric Composition-Polyester.Mattress Cover-Printe , Terra Bedside Table Wenge Of Godrej Make , Dimensions: Width: 460 Mm Depth: 461 Mm Height: 516.5 Mm Metal Frame: Bed Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 1.2 Mm Thickness & M.S. Channels In 1.0, 1.6, 2.0 Mm Thickness Panels: Prelaminated Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Edge Banded With 2 Mm Thick Pvc Edge Banding Finish 18 Mm Thick Prelaminated Particle Board Is In Colarain Shade , Terra King Bed Wenge Of Godrej Make , Overall Size: Length - 2053.0 Mm Width - 1875.0 Mm Height - 934.0 Mm Material : Bed Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 1.2 Mm Thickness & M.S. Channels In 1.0 Mm Thickness. Partition Panels And Plinths Are Made Of 25 Mm Thick Prelaminated Particle Board. Tail Boad, Headboard, Side Board , Mattress Panels And Drawerpanels Of Bed Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Edge Banded With 2 Mm Thick Pvc Edge Banding. Construction: Knock Down Construction.Packets: 1 Bed In 6 Packets. Finish:18 Mm Thick Prelaminated Particle Board Is In Colarain Shade. Metal Frames Are Powder Coated In Shade Matt Black To The Thickness Of 50 Microns(+-10). , Swing Mat 78 72 5 Of Godrej Make , Thickness: 10 Cm, 12.5 Cm This Dual Sided Mattress Has Superior Bonded Foam Base For A Better Back Support. The Fabric Used In It Is Tear Resistant Yet Breathable And Has Foam Quilting. , Gradient 1 Str Sofa Fab Magenta Of Godrej Make , Dimensions W X H X D (Cm)-77.5 X 84 X 85 Primary Material-Pinewood Upholstery Material-Fabric Seat Height (Cm)-44 , Eqeconomic Study Table Of Godrej Make , Overall Size:Width - 900.0 Mm Depth - 450.0 Mm Height - 750.0 Mm Material:Top Panel Is Made Of 18 Mm Thick Prelaminated Particle Board All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 0.9 Mm Thickness. Drawer Assembly Consists Of Drawer Front Made Of 0.6Mm Crca Sheet, Drawer Tray Of 0.8Mm Crca Sheet.Hardware :The High Quality Hardware Used .Construction:Knock Down Construction.Packets:3 Packets. Finish:18 Mm Thick Prelaminated Particle Board Is In 4501, Make — Godrej (Shirval).Side Frame Structure And Back Frame Structure Are Powder Coated In Shade : Matt Taupe White. Ref No. 9001904 To Thickness Of 50 Microns (+-10).Rest All Metals Are Powder Coated In Shade : S/Gcharbrown. Ref No. 9000605 To Thickness Of 50 Microns (+-10). , Terra 1600W Sld Wrdb Wenge Of Godrej Make , Dimensions W X H X D (Cm) 160 X 197 X 60 Metal Frame: Bed Structure Consist Of Metal Frames Made Of M.S. 25 Mm Square Pipes In 1.2 Mm Thickness & M.S. Channels In 1.0, 1.6, 2.0 Mm Thickness Panels: Prelaminated Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Edge Banded With 2 Mm Thick Pvc Edge Banding , Cesar Sideboard Wood Walnut Of Godrej Make , Dimensions W X H X D (Cm) 40 X 76 X 100 Primary Material Sheesham Wood , Slotted Angle Racks Of Godrej Make , 2400Mm Height X 371 Mm Depth X 900Mm Width 4 Shelves Including Top , Slotted Angle Racks Of Godrej Make , 2400Mm Heigth X 448 Mm X 900 Mm Width 4 Shelves Including Top

INR 11800 /-

Refer document

INR 2.30 Crore /-

Name of Work:Furnishing of Cuttack Netaji Bus Terminal at Khannangar, Cuttack- “FURNITURE”

Sl. No.	Item Description
1	Reception Table 2 Arc Rubberwood Top of Godrej Make
2	Top shall be of Rubberwood with clean Matt PU finish 18 mm thick , inside radius - 700 mm , outside radius - 1350 mm and depth - 650 mm . Cork shall be 18 mm thick of rubber . Glass shall be Frostered 10 mm thick diamond cut finishing on edges , inside radius shall be - 1202.5 mm , otside radius - 1402.5 mm and depth - 200 mm . The Modesty Panel shall be MS Perforated sheet below worksurface : 0.8 mm (thick) x 665 mm ( height) x 1345 mm (flat length ) . Above Worksurface : 0.8 mm (thick ) x 260 mm (height)x 1345 mm (flat length) . The legs shall be of MS tube 1.6 mm thick diameter 50.8 mm and height 604 mm
3	OXBO MID BACK of Godrej Make
4	seat assembly: the seat assembly should bemade up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. seat size: 47.0 cm. (w) x 48.0 cm. (d)back assembly: the back asembly. should bemade of powder coated (oft 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. back size : 46.5 cm (w) x 60.5 cm (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.armrests: the one-piece armrests should beinjection moulded from black co-polymer polypropylene. Centre-tilt mechanism: the mechashould be m should bedesigned with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • upright position locking. tilt tension adjustment. .pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.elescopic bellow assy: the bellow should be3 piece telescopic type and injection moulded in black polypropylene.pedestal assembly: the pedestal should beinjection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. the pedestal should be66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)twin wheel castors: the twin wheel castors should beinjection moulded in black nylon.Overall Dimensions of Chair-Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.
5	MAESTRO of Godrej Make
6	Maestro Main Desk OXFORD CHERRY The main desk of Maestro shall be of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF (Medium density fiberboard) black pad.The modesty panel shall beof18 mm thick MFC (Melamine faced chipboard).The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be ofduck noise profile edge in order to enhance the workspace aesthetics.
7	Maestro Joining Table RHS The maestro joining table RHS shall be of size 1200 Width mm x 1050 Depth mm x 750 Height mm.The top panel shall be 25 mm thick with MFC (Melamine Faced Chipboard).The leg of the joining table shall be of metal.Polyurethane Coated joining table.
8	Maestro Mobile Pedestal Oxford Cherry The Maestro Mobile Pedestal size shall be 400 Width mmx 560 Depth mm x 560 Height mm.The top panel shall be 25 mm thick MFC ( Melamine Faced Chipboard) plus all the other panels shall be 18 mm thick coated with MFC (Melamine Faced Chipboard). In Mobile pedestalall other panels shall be of 18 mm thick MFC(Melamine Faced Chipboard).In Mobile pedestal lock and Castors shall be Provided. The handle shall be of Metal.
9	Maestro Return Desk The maestro return desksize shall be 1200 Width mm x 600 Depth mm x 730 Height mm.The top panel shall 25 mm thick MFC ( Melamine Faced Chipboard) .The Modesty panel shall be 18 mm thick MFC coated. The leg of the return desk shall be 25 mm thick MFC (Melamine faced chipboard)plus the right and left pad should be 30 mm thick MDF (medium density fiber ) coated.
10	Maestro Bookcase The Maestro bookcase size shall be 790 Width mm x 400 Depth mm x 2200 Height mm.The top panel shall be 25 mm thick MFC (Melamine faced chipboard)plus the bottom panel shall be 25 mm MFC coated.The wood door panels shall be 18 mm thick MFC .The glass door panels shall be of 5 mm thick plus all the other panels shoul be 18 mm thick MFC (melamine faced chipboard).The handles shall be of metal.The bookcase unit provides ample amount of storage.
11	Maestro Back Unit Oxford Cherry The Maestro back unit size shall be 1400 Width mm x 470 Depth mm x 760 Height mm.The top panel size shall be 25 mm thick MFC (Melamine faced chipboard). The door panels and all other panels should be 18 mm thick MFC (Melamine faced chipboard) .The handle shall be of metal.
12	Marvel High Back of Godrej Make
13	1) SEAT ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) 2) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm 3) ARMRESTS: The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. 4) ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360" revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. 5) SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. 6) ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. 7) PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. 8) PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) 9) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter.
14	Finnesse Table-5026 + ERU 3616+Free Standing Ped with Castors for Finnesse Table+Finnesse HDU-4315 of Godrej Make
15	TABLE-1500 X 750 X 740 ERU-1050 X 450 X 705 PED-646H x 390W x 440D HDU-1280 x 425 x 705 Finesse Table - 5026size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Widthx 450 Depthx 705 Height. The top ofFinesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Overall Dimensions of Free Standing Ped With Castors For Finnesse Table shall be 390mm(W)x440mm(D)x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal . The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts . Finesse HDU - 4315 sizeshall be 1280 Widthx 425 Depthx 705 Height. Top ofFinesse HDU - 4315 shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.
16	Pulse Mb Seat, Adj. Arms Larger Seats of Godrej Make
17	seat/back assembly: the seat should bemade up of 1.2 ± 0.1cm thk. hot pressed plywoodocp-qlta-pl14-18.the back should bemade up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgffor 25% compression. armrests : the armrests have an up-down adjustment of 8.5 ± 0.5cm which should beprovided in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe). lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. front pivot synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features. • 360° revolving type. • single point control. • front-pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment. • 4-position locking with anti-shock feature. • seat/back tilting ratio of 1:2. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. pedestal assembly: the pedestal should beinjection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch-center dia should beØ66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).twin wheel castors:the twin wheel castors should beinjection moulded in black nylon.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D)BACK SIZE: 45.0 cm. (W) x 65.3 cm. (H).
18	ARISTO TBL LH 1200 x 600 of Godrej Make
19	1200x600x750 Work Surface Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management Modesty Panel Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under-structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Handle is provided for ease of opening. Storage is provided with cam lock for security.
20	Work 5026 of Godrej Make
21	Work - 5026 size shall be1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . Allthe edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on theuser side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modestypanel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key.
22	Wish Workstations of Godrej Make
23	INTERMEDIATE BLOCKS Intermediate blocks are given in DL + DL finsh. Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. & 1500 mm w1 x 1500 mm w2 x 600 mm d Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. KBPT with mousetray - metal CPU trolley - with castors
24	Matrix 2 seater Noarm With Grouting of Godrej Make
25	The seat shell should bea welded assembly of seat,back and side frame. The seat and back should bemade of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should bewelded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should bepowder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D)BACK SIZE : 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should bepowder coated ( DFT 40-60 microns ).The leg assembly should befitted with shoes and levellers in Nylon. The leg structure should bedesigned with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould beof uneven flooring.Connecting beam should befitted with snap locking end cap.lt also aids in side-by-side understructure alignment. Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm. Width & Depth of Chair as - Width-114.5cm and Depth-63.8 cm.
26	Waiting Seating bench (3 seater) of Godrej Make
27	Matrix 3 seater Noarm With Grouting 1) SEAT SHELL : The seat shell should bea welded assembly of seat,back and side frame. The seat and back should bemade of 0.12±0.013cm thk CR steel sheet with oblong perforations.They should bewelded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly should bepowder coated ( DFT 40-60 microns ). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. SEAT SIZE : 47.8 cm (W) x 44.6 cm (D)BACK SIZE : 41.6 cm (W) x 23.0 cm (H) 2) UNDERSTRUCTURE ASSEMBLY: Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk.The welded structure assembly should bepowder coated ( DFT 40-60 microns ).The leg assembly should befitted with shoes and levellers in Nylon. The leg structure should bedesigned with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould beof uneven flooring.Connecting beam should befitted with snap locking end cap.lt also aids in side-by-side understructure alignment.
28	MINGLE POD PLT PEBBLE _1000X1000 ST of Godrej Make
29	1000(Dia) x 740 Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructur-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel-The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns).
30	AYUSH LITE SHEET BED WITHOUT CASTORS WITH FIXED HEAD BOARD / FOOT BOARD IN MS of Godrej Make
31	Over allouter dimension(L) 2230 x (W) 900 x (H) 614mm. Head board and foot board havingcurved profileat the top made of MS ERW round tubes of thickness 1.2 mm & dia 31.75 mm. Head board and leg board is further strengthned by 3 vertical pipes each of thickness 1.2 mm and dia of 19mm &1 each Horizontal pipe of thickness 1.2mm and dia of 25.4mm. The head and leg board have 4 nos mosquioto pole holder. Lying surface is made of CRCA sheet of thickness of 1 mm. It is strengthned bytrapizodal contour (rounded corner) 10 nos, embossed cut out. All metal componentsare pre treated with zinc phosphating and then powder coated with epoxy polyster powder coating.goods are supplied in knocked down construction to reduce carbon emission.Ensuring qood quality welding " Co2 Argon" process is adhered. Leg shoe TPE ( thermo plastic Elastomer)with reinforced metal washer are used for leg shoes. Maximum safe patient working load is 135 kg.
32	HEIGHT ADJUSTABLE SS TOP ROUND STOOL of Godrej Make
33	Overall Dimension: Overall Sizes Diagonal LegDia 538 mmH470 min-655max. Top platemade of SS 202 made sheet with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat basemade of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hubmade of MS ERW tube having dia of 38mm and thickness 2 mm.The Hub is welded with the legs and itaccommodate and cover the lead screw mechanism.The under-structure consist of 4 legs made up ofMS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leggive a round & clean look. All the legs is Provisionided with 4 nos of Nylon-6 bush. All metal componentsare pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyester powder coatingto fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative]. Safe working load is 135kg
34	Time Out 4 Seater PU Coated of Godrej Make
35	1135 x 1175 x 750 Time Out 4 Seater PU Coated size shall be1135 Width mmx 1175 Depth mmx 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .
36	Time Out 6 Seater PU Coated of Godrej Make
37	1734 x 1175 x 750 Time Out 6 Seater PU Coated size shall be1734 Width mmx 1175 Depth mmx 750 Height mm.Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .
38	Café Pod with MDF top PU Coated) of Godrej Make
39	800 x 800 x 745 CaféPod with MDF top PU Coated size shall be800 Widthx 800 Depth mm x 745 Height mm . Top shall be of MDF 25 mm thick size : 800 mm x 800 mm x 25 mm . Painted in yellow ,red,orange,wine,biege PU coating on a sealer coat . PU coating done on both top and bottom surfaces . PU coating has a hardness of 3H . Top is Fitted to the understructure with No. 8 x 16 plilip head screw . Understructure shall be foldable and stackable , made with combination of aluminium and plastic . Centre column is of Aluminium extrusion of diameter 70 mm , which is anodized . Base is made in 2 pieces of die cast aluminium with buffed finish . It is bolted together with centre column and top flange .
40	UNWIND of Godrej Make
41	MS Understructure The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance. The Powder coated (DFT50+ microns) weled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tubThe Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm Seat Size 52.5cm(W)*53.2 cm(D).Back Size 51.6 cm(W)*40.5 cm (H)
42	SWING DUSTBIN 14" X 28" of Godrej Make
43	Specifications – Diameter 14 inch X Height 28 inch Thickness - 0.40mm Volume – 65 Litres Material – SS 200
44	ARISTO TBL LH 1350 x 600 of Godrej Make
45	1350x600x750 Work Surface Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management Modesty Panel Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under-structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Handle is provided for ease of opening. Storage is provided with cam lock for security.
46	Supreme Ad 1 str sofa fab Dark Brown of Godrej Make
47	Overall Size :Width: 87.5cmDepth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush
48	Meraki coffee table Brown/Beige of Godrej Make
49	Overall Size : Width : 120cmDepth : 60cm Height : 36.7cm Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction : Knock down .Finish :All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos
50	Duplexx Bed of Godrej Make
51	Width : 2100mm.Depth:915mm,Overall Height:2400mm, Bed With Provisions for Musquito Rod
52	Hero Mat 78 36 4 of Godrej Make
53	Hero Mat 78 36 4 Thickness 50 mm.Quilting Material-PU Foam.Density of Quilting Material (± 2 Kg/m3)-18 Kg/m3.Mattress Top-Box Type. Cover-Fabric Composition-Polyester.MATTRESS COVER-Printe
54	Terra Bedside Table Wenge of Godrej Make
55	DIMENSIONS: Width: 460 mm Depth: 461 mm Height: 516.5 mm METAL FRAME: Bed Structure consist of metal frames made of M.S. 25 mm Square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0, 1.6, 2.0 mm thickness PANELS: Prelaminated Panels are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding FINISH 18 mm thick Prelaminated Particle Board is in Colarain Shade
56	Terra King Bed Wenge of Godrej Make
57	Overall Size: Length - 2053.0 mm Width - 1875.0 mm Height - 934.0 mm Material : Bed Structure consist of metal frames made of M.S. 25 mm Square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0 mm thickness. Partition panels and plinths are made of 25 mm Thick Prelaminated Particle Board. Tail boad, Headboard, Side board , Mattress panels and Drawerpanels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding. Construction: Knock Down construction.Packets: 1 Bed in 6 packets. Finish:18 mm thick Prelaminated Particle Board is in Colarain Shade. Metal frames are powder coated in shade Matt Black to the thickness of 50 microns(+-10).
58	Swing Mat 78 72 5 of Godrej Make
59	Thickness: 10 cm, 12.5 cm This dual sided mattress has superior bonded foam base for a better back support. The fabric used in it is tear resistant yet breathable and has foam quilting.
60	Gradient 1 str sofa fab Magenta of Godrej Make
61	Dimensions W x H x D (cm)-77.5 x 84 x 85 Primary Material-Pinewood Upholstery Material-Fabric Seat Height (cm)-44
62	EQEconomic Study table of Godrej Make
63	Overall Size:Width - 900.0 mm Depth - 450.0 mm Height - 750.0 mm Material:Top panel is made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 2 mm thick PVC edge banding. Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of drawer front made of 0.6mm CRCA sheet, drawer tray of 0.8mm CRCA sheet.Hardware :The high quality hardware used .Construction:Knock Down construction.Packets:3 packets. Finish:18 mm thick Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Side frame structure and Back frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10).Rest all metals are powder coated in shade : S/GCHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10).
64	Terra 1600W SLD WRDB Wenge of Godrej Make
65	Dimensions W x H x D (cm) 160 x 197 x 60 METAL FRAME: Bed Structure consist of metal frames made of M.S. 25 mm Square Pipes in 1.2 mm Thickness & M.S. Channels in 1.0, 1.6, 2.0 mm thickness PANELS: Prelaminated Panels are made of 18 mm thick Prelaminated Particle Board with all the exposed edges edge banded with 2 mm thick PVC edge banding
66	Cesar Sideboard Wood Walnut of Godrej Make
67	Dimensions W x H x D (cm) 40 x 76 x 100 Primary Material Sheesham Wood
68	Slotted Angle Racks of Godrej Make
69	2400mm Height x 371 mm Depth x 900mm Width 4 shelves including top
70	Slotted Angle Racks of Godrej Make
71	2400mm Heigth x 448 mm x 900 mm Width 4 shelves including top