Lake Developement Authority has published Tender For Maintenance Rate Contract Repairs To Existing Electromechanical Equipments Fitted At Various Ipss Viz Nishat Nigeen Sadrabal Khoni Khan And Shanpora. Submission Date for this Tender is 24-11-2022. Electromechanical Machinery Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Nov-2022 | Critical Date extension corr | Date | 24-11-2022 |
| Sl. No. | Item Description |
| 1 | Maintenance rate contract |
| 2 | Maintenance rate contract for Three no, three phase, 10 HP raw sewage pump of following specifications: Make: Kishor Model: KDS10 HP Speed: 1440 RPM Voltage:+415V Rated Current at 415 Volt : 20.2 Amps. Material Handling : Solid Size in 100 mm. Technical specifications of the parts are as under: |
| 3 | Charges on account of dismantling and disconnecting of pumping unit from existing pipe network and LT cabling respectively, retrieval and shifting these to workshop, dismantling, repairing and reassembling, shifting of pumping unit back to site installation and testing at full load |
| 4 | Providing & fitting of O Ring Set |
| 5 | Providing & fitting of Oil with plug washer |
| 6 | Providing & fitting of Fastener set |
| 7 | Providing & fitting of Adjustment Screw |
| 8 | Providing & fitting of Rewinding of Motor |
| 9 | Providing & fitting of DE Bearing |
| 10 | Providing & fitting of NDE Bearing |
| 11 | Providing & fitting of Mechanical Seal set |
| 12 | Providing & fitting of Terminal Block |
| 13 | Providing & fitting of Submersible Cable 1×2.5×10 core |
| 14 | Providing & fitting of Bottom plate |
| 15 | Providing & fitting of Eye bolt union chain |
| 16 | Providing & fitting of Bracket coupling |
| 17 | Providing & fitting of Cable entry kit |
| 18 | Providing & fitting of Spacer set |
| 19 | Providing & fitting of Cable protector |
| 20 | Charges on account of Shaft Balancing by appropriate balancing equipment |
| 21 | Maintenance rate contract for Three No, three phase, 15 HP raw sewage pump of following specifications: Make: Kishor Model: KDS15 HP Speed: 1440 RPM Voltage :+415V Material Handling : Solid Size in 100 mm. Technical specifications of the parts are as under: |
| 22 | Charges on account of dismantling and disconnecting of pumping unit from existing pipe network and LT cabling respectively, retrieval and shifting these to workshop, dismantling, repairing and reassembling, shifting of pumping unit back to site installation and testing at full load |
| 23 | Providing & fitting of O Ring Set |
| 24 | Providing & fitting of Oil with plug washer |
| 25 | Providing & fitting of Fastener set |
| 26 | Providing & fitting of Adjustment Screw |
| 27 | Providing & fitting of Rewinding of Motor |
| 28 | Providing & fitting of DE Bearing |
| 29 | Providing & fitting of NDE Bearing |
| 30 | Providing & fitting of Mechanical Seal set |
| 31 | Providing & fitting of Terminal Block |
| 32 | Providing & fitting of Submersible Cable 1×2.5mm×10 core of pumps |
| 33 | Providing & fitting of Bottom plate |
| 34 | Providing & fitting of Eye bolt union chain |
| 35 | Providing & fitting of Bracket coupling |
| 36 | Providing & fitting of Cable entry kit |
| 37 | Providing & fitting of Spacer set |
| 38 | Providing & fitting of Cable protector |
| 39 | Charges on account of Shaft Balancing by appropriate balancing equipment |
| 40 | Maintenance rate contract for One No, three phase, 10 HP raw sewage pump of following specifications: Make: Grundfos Model: 9862805210000293 Series: SLI 80.80.40.4.51D.C Speed: 1464 RPM Voltage :+415V Material Handling : Solid Size in 100 mm. Technical specifications of the parts of one unit are as under: |
| 41 | Charges on account of dismantling and disconnecting of pumping unit from existing pipe network and LT cabling respectively, retrieval and shifting these to workshop, dismantling, repairing and reassembling, shifting of pumping unit back to site installation and testing at full load |
| 42 | Providing & fitting of O Ring Set |
| 43 | Providing & fitting of Oil with plug washer |
| 44 | Providing & fitting of Fastener set |
| 45 | Providing & fitting of Adjustment Screw |
| 46 | Providing & fitting of Rewinding of Motor |
| 47 | Providing & fitting of DE Bearing |
| 48 | Providing & fitting of NDE Bearing of reputed make |
| 49 | Providing & fitting of Mechanical Seal set |
| 50 | Providing & fitting of Terminal Block |
| 51 | Providing & fitting of Submersible Cable 1×2.5×10 core |
| 52 | Providing & fitting of Bottom plate |
| 53 | Providing & fitting of Eye bolt union chain |
| 54 | Providing & fitting of Bracket coupling |
| 55 | Providing & fitting of Cable entry kit |
| 56 | Providing & fitting of Spacer set |
| 57 | Providing & fitting of Cable protector |
| 58 | Charges on account of Shaft Balancing by appropriate balancing equipment |
| 59 | Maintenance rate contract for One No, three phase, 10 HP raw sewage pump of following specifications: Make: Wilo-Rexa Pro Model: 9862805210000293 Series:VO6DA-110/EAD1X2.T0015-540-P Speed: 1450 RPM Voltage: +415V Material Handling: Solid Size in 100 mm. Technical specifications of the parts of one unit are as under: |
| 60 | Charges on account of dismantling and disconnecting of pumping unit from existing pipe network and LT cabling respectively, retrieval and shifting these to workshop, dismantling, repairing and reassembling, shifting of pumping unit back to site installation and testing at full load |
| 61 | Providing & fitting of O Ring Set |
| 62 | Providing & fitting of Oil with plug washer |
| 63 | Providing & fitting of Fastener set |
| 64 | Providing & fitting of Adjustment Screw |
| 65 | Providing & fitting of Rewinding of Motor |
| 66 | Providing & fitting of DE Bearing |
| 67 | Providing & fitting of NDE Bearing |
| 68 | Providing & fitting of Mechanical Seal set |
| 69 | Providing & fitting of Terminal Block |
| 70 | Providing & fitting of Submersible Cable 1×2.5×10 core |
| 71 | Providing & fitting of Bottom plate |
| 72 | Providing & fitting of Eye bolt union chain |
| 73 | Providing & fitting of Bracket coupling |
| 74 | Providing & fitting of Cable entry kit |
| 75 | Providing & fitting of Spacer set |
| 76 | Providing & fitting of Cable protector |
| 77 | Charges on account of Shaft Balancing by appropriate balancing equipment |
| 78 | Maintenance rate contract for Diesel Generator Sets- (Scheduled Servicing). Technical specifications of the parts of each unit are as under: |
| 79 | 62.5 KVA Kirloskar Diesel Generator Sets at IPS Khoni khan: |
| 80 | Scheduled Servicing of Engine of 62.5 KVA Kirloskar DG set installed at IPS Khoni khan by way of filling of fresh engine oil after flushing out contaminated engine oil from the machine. The job includes unmounting of filter assembly, removal of used filters and drain plugs. All the necessary clean-ups at site are also included in the job. |
| 81 | P/F of M. Oil Filter Kirloskar KFO-03--1-2436 |
| 82 | P/F of Pre-Fuel Filter Kirloskar F002 H24468 |
| 83 | P/F of Fine Filter Kirloskar FOO2H24467 |
| 84 | P/F of Pri. & Sec Air Filter Kirloskar 4H.1198.01.0.00, |
| 85 | P/F of Sec. Air Filter inner Kirloskar 4H.1198.02.0.00. |
| 86 | Providing of M oil preferably Indian oil (hp) or Castrol CRB+ or any company approved make of 20W30,40,50 grade |
| 87 | 35 KVA Cummins Diesel Generator Sets at IPS Shanpora: |
| 88 | Scheduled Servicing of Engine of 35 KVA Cummins DG set installed at IPS Shanpora by way of filling of fresh engine oil after flushing out contaminated engine oil from the machine. The job includes unmounting of filter assembly, removal of used filters and drain plugs. All the necessary clean-ups at site are also included in the job. |
| 89 | P/F of M. Oil Filter Cummins 1220922 |
| 90 | P/F of Filter Water separatorCummins 4093731 |
| 91 | P/F of Air Filter 1st Cummins AO34P656 |
| 92 | P/F of Air Filter 2nd Cummins AO34P660 |
| 93 | Providing of M oil preferably Indian oil (hp) or Castrol CRB+ or any company approved make of 20W30,40,50 grade |
| 94 | 15 KVA Air cooled Duez Diesel Generator Sets at IPS Nishat: |
| 95 | Scheduled Servicing of Engine of 15 KVA Air cooled Duez Engine installed at IPS Nishat by way of filling of fresh engine oil after flushing out contaminated engine oil from the machine. The job includes unmounting of filter assembly, removal of used filters and drain plugs. All the necessary clean-ups at site are also included in the job. |
| 96 | P/F of M. Oil Filter as per sample |
| 97 | P/F of Fuel filter as per sample |
| 98 | P/F of Air Filter as per sample |
| 99 | Providing of M oil preferably Indian oil (hp) or Castrol CRB+ or any company approved make of 20W30,40,50 grade |
| 100 | 82.50 KVA Water Cooled Mahindra Diesel Generator Sets at IPS Nigeen & Sadrabal: |
| 101 | Servicing of Genset 82.5 KVA water cooled Mahindra Engine by way of filling of fresh engine oil after flushing out contaminated engine oil from the machine. The job includes unmounting of filter assembly, removal of used filters and drain plugs. All the necessary clean-ups at site are also included in the job. |
| 102 | P/F of M. Oil Filter as per sample |
| 103 | P/F of Fuel filter water separator as per sample |
| 104 | P/F of Air Filter set primary & secondary (as per sample) |
| 105 | Providing of M oil preferably Indian oil (hp) or Castrol CRB+ or any company approved make of 20W30,40,50 grade |
| 106 | Control Panel Electric Items at IPS Shanpora & Koni kahn |
| 107 | P/F of contactor assembly MNXX45 50A rating AC3/IS/IEC 60947-4-1make L&T ( as per sample) |
| 108 | P/F of 4 pole NO/NC MNX A -1 make L&T (as per sample) |
| 109 | P/F of NO/NC MNX A -22 pole make L&T (as per sample) |
| 110 | P/F of CT coil 50/5 amp make L&T (as per sample) |
| 111 | P/F of star delta timer GIC make. (as per sample) |
| 112 | P/F of disconnector switch 63-amp 3 phase. (as per sample) |
| 113 | P/F of 3 pole MCCB DN 0-100m. (as per sample) |
| 114 | P/F of single phase MCB/C6 ( as per sample) |
| 115 | P/F of front operated, on load 4 pole, 400 +15% volts of L&T make. |
| 116 | P/F 95 Sq.mm, 50Sq.mm, 35 Sq.mm- (50 of each) Aluminium thimbles along with nuts & bolts, including trimming, crimping & tapping. |
| 117 | P/F of 3 phase Motor protection device with display of following specifications: Motor Protection Device = Digital Motor Protection Relay with LCD Display Protections = Under Voltage, Over Voltage, Under Load, Over Load, Locked Rotor, Current unbalance, Voltage Unbalance, Phase failure & Phase reversal. Display Parameters = Line Voltage, Phase Voltage, Line Current, Frequency, KW, KV, PF, Fault history. ( as per sample) |
| 118 | P/F of thermal overload relay 23-32A (as per sample) (as per sample) |
| 119 | P/F of multicolour phase indicators (as per sample) |
| 120 | P/F of 3 pole MCB 32 Amp (as per sample) |
| 121 | P/F of 2pole NO/NC 10-amp relay (as per sample) |
| 122 | P/F of MCB DP 10 amp (as per sample) |
| 123 | P/F of single-phase preventer GIC. (as per sample) |
| 124 | P/F of 4 pole MCCB 100amp. |
| 125 | Servicing of stabilizers (manual & servo) including repairs /replacement of spares with topping up of transformer oil in installed at IPS Shanpora, Khonkhan, Nigeen, Sadrabal & Nishat rates are quoted for cost of one site only. |
| 126 | Providing of log book 50 pages in triplicate coloured, size 21x30 cm complete with binding /finishing. |
| 127 | Providing & fixing of connector box size 8"x10" of MS Sheet 26 gauge Make Havel"s. |
| 128 | Providing & fixing water level controller included sensors, the job included providing of 3 core 1.5mm coper cable 10 meters. With following sensors. Auxiliary supply voltage: 200+20%VAC Frequency: 3no stainless prods. Trip time Delay: less than 1 sec. |
| 129 | Providing & laying of tested insulated antiskid rubber mat 10/12mm thick for control rooms for IPS"s with following specifications, a, tested specification also meet BS 921. b, for both AC & DC applications. c, DI Electric strength 65 KVA. d, AC Proof voltage up to 36 KV. e, low temperature resistant, acid, Alkalinity, oil resistant. |
| 130 | Providing & fixing of 4-inch dia DI Butter fly valve to be fixed on delivery MS pipes 4-inch dia installed at raw sewage sump at IPS, with following specifications. a, ISO-5752, b, face to face dimension, c, 250 PSI |
| 131 | Providing & fixing of 4-inch dia DI NRV valve to be fixed on delivery MS pipes 4-inch dia installed at raw sewage sump at IPS, with following specifications. a, ISO-5752, b, face to face dimension, c, 250 PSI (complete as per sample) |
| 132 | Painting to all delivery 4-inch dia & rising main 8 inch & 10-inch dia pipes & gantry structure of raw sewage sump at IPS"s the job included applying emery paper & scriber for removal of old paints from the surface of MS pipes to prepare the surface smooth, included applying two coats of enamel paint of reputed make & manufacturer in desired shade followed by coat of steel prim coat. |
| 133 | Providing of material & fabrication of trash guard for RSS in steel structure made out of MS Material 40x40x5mm fame & mesh out of 50x5mm ISF in welded built up sections, shall be welded keeping pitch distance 50mm.the job included cutting, bending, straightening & installation of trash guard inside the RSS after fabrication, the sketch for fabrication of trash guard will be provided at site. Further job shall include providing various specification of steel material fabrication thereof at various sites. |
| 134 | Providing & fixing of delivery pipes MS black 100 mm in dia, 4 mm thick at RSS (RAW SEWAGE SUMP) including providing & fixing of suitable MS flange in welded built up sections with holes. Job is inclusive of suitable size of gaskets, nuts & bolts. The pipe shall be connected with duck foot at bottom of the sump with flange/welding thereof including red oxide coat & paints thereof. |
| 135 | Maintenance rate contract for Other Allied Electric equipment"s installed in control room at IPS Stations. |
| 136 | Providing & fixing of MCB 10Amp 220-40 volt Make Havel"s. |
| 137 | Providing & fixing of MCB DP 40 Amp 220-240 volt Make Havel"s. |
| 138 | Providing & fixing of change over 32-amp 3 pole 32 Amp 220-240 volt Make Havel’s. |
| 139 | Providing & fixing of celling fan 18” 220–240-volt AC Make Havel"s. |
| 140 | Providing & fixing of Exhaustfan 9” 220–240-volt AC Make Havel"s. |
| 141 | Providing & fixing Button Holder6-amp 220-240 voltMake Havel"s. |
| 142 | Providing & fixing on/off switch 6-amp220-240 voltMake Havel"s. |
| 143 | Providing & fixing on/off SS Combine switch 16-amp220-240 voltMake Havel"s. |
| 144 | Providing & fixing of 35-watt LED street lights Make Havel"s. |
| 145 | Providing & fixing of 9-watt LED bulbs Make Havel"s. |
| 146 | Providing of 2 ton chain block of reputed make with 6 no eye whole clamps/d-shackles size as per site requirement. |
| 147 | Replacement of burn out HT drop out set by way of dismounting of drop out set including bracket from electric poles, replacement of burn out/broken three phase HT drop out set including fuse wires of suitable gauge. Remounting of new drop out set with bracket on poles. The contracting agency shall take all necessary safety measures during execution of job which includes providingof safety tools & Tackles. Checking the performance of work executed on full load after completion of work. The contracting agency has to arrange necessary shut down from the PDD for safe & secure repairs at site. |
| 148 | Replacement of burn out/ broken link set, dismounting from electric poles replacement of burn out/broken three phase link set. The contracting agency shall take all necessary safety measures during execution of job which includes providing of safety tools & Tackles. Checking the performance of work executed on full load after completion of work. The contracting agency has to arrange necessary shut down from the PDD for safe & secure repairs at site. |
| 149 | Providing, Fitting, Testing and Commissioning of 200 mm Nominal Diameter, Ductile Iron, VAG make, EKO Plus Gate Valve of rating PN 16. The valve shall be resilient seated EN 1171, with internal stem thread, face-to-face length according to EN 558- 1, flange dimensions according to DIN EN 1092-2. Material of Construction: Body parts of ductile cast iron EN-JS 1030 (GGG-40), with flat bottom, wedge fully rubber lined with EPDM to KTW and W270, with wedge draining, stem made of stainless steel min. 13 % Cr, maintenance-free spindle seal. Corrosion protection: Inside and outside epoxy coating, blue, RAL 5005 according to GSK. The jobincludes providing andfitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with 200mm dia MS pipe 4 rft long welded with 8mm thick flange fixed with sluice valve & connected at main intake of RSS line & shall be fitted with leaked proof material & shall be cover with rich cement concreate mixture as per site requirement. Cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work. Further the job included cleaning of sump bottom. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
