Bids Are Invited For Furniture Procurement Nhai Ramgarh- Quantity : 33-1 Item Number 1 Godrej Interio Impress Main Desk 2400W With Eru And Pedestal.The Main Table Shall Be Of Size 2400 Width Mm X 1050 Mm Depth X 750 Mm Height. Top Surface Of The Table Shall Made Up Of Mdf ( Medium Density Fibre ) Board Duly Finished With Veneer And Final Coating Of Pu. The Main Desk Should Contain In Built Key Board Pull Out Tray For Keeping Keyboard Of Computer. The Front Modesty Panel Of The Table Shall Be Made Up Of Mdf Board Of Size 1640 Mm X 600 Mm X 16Mm Which Shall Also Be Duly Finished With Veener And Pu Coating. For Personal Storage One Mobile Pedestal ( 3 Drawer Unit ) Shall Be Provided Of Size 510 Mm Width X 635 Mm Height And 445 Mm Depth. The Storage Pedestal Shall Also Be Made Up Of Mdf Duly Finished With Veener & Final Coating Of Pu. The Side Shall Be Of Size 1200Mm Width X 445Mm Depth X 660 Mm Height. The Side Unit Shall Be Made Up Of Mdf Board Duly Finshed With Veneer And Final Finish By Pu Coating. The Design Of The Side Unit Shall Be Such That It Can Be Placed On Either Side Of The Main Table. The Side Unit Shall Contain Open Space For Keeping Cpu In Extreme Right Side, One Closed Storage Shutter At Extreme Left End & Open Space In The Middle With One Shelf For Keeping Files. The Thickness Of The Top Of The Side Unit Shall Be 25Mm.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 2 Item Number 2 Godrej Interio Halo Very High Back Chair.1. Seat / Back Assembly: The Seat Should Be Made Up Of 1.2 ± 0.1Cm. Thick Hot Pressed Plywood And Upholstered With Leather And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumber Support For Extra Comfort.Back Size: 53.0Cm. ( W ) X 95.4Cm. ( H ) Seat Size:54.6Cm. ( W ) X 49.0Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density = 45 + / -2 Kg / M³ And Hardness Load 16 ± 2 Kgf For 25% Compression.3. Seat-Back Connecting Spine:The Seat And Back Should Be Arrested Together With Spine Made Of 0.8 ±0.05 Cm Thk Hr Steel And Should Be Black Powder-Coated ( Dft 40-60 Microns ) .4. Armrest Assy: The Armrest Assy. Should Comprise Of Three Parts Viz. The Armrest Support Tube And P.U. Armrest And The Armrest Top. The Armrest Tube Assy. Should Be Made Of 2.54±0.03Cm X 0.16±0.0128Cm M.S. E.R.W. Support Tubes And Chrome Plated. The P.U. Armrest Should Be Made Of Black Integral Skin Polyurethane With 50-70 Shore A Hardness And Reinforced With M.S. Insert. The Armrest Top Should Be Made Of Abs & Upholstered With Foam & Leather.5. Front Pivot Synchro Tilt Mech.: The Mechanism Should Be Designed With The Following Features:•360° Revolving Type.•Seat Back Tilting Ratio Of 1 : 1.5.•Front Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.•Tilt Tension Adjustment.•5-Position Locking With Anti-Shock Back Mechanism, Which Prevents The Backrest From Impacting The User When The Lock Should Be Released.•Static Seat Depth Adjustment = 5.0 ± 0.5Cm With 5 Position Locking.6.Pneumatic Height Adjustment: It Has An Adjustment Stroke Of 9.0 ± 0.3Cm.7. Blow Moulded Bellow : The Bellow Should Be 1 Piece And Blow Moulded In Black Polypropylene.8. Pedestal Assy: The Pedestal Should Be Made Of Die-Cast Aluminium With Buffing Finish. It Should Be Fitted With 5Nos. Twin Wheel Castor. The Pedestal Should Be 67.0 ± 0.5Cm Pitch-Center Dia. ( 77.0 ± 1.0Cm With Castors ) . 9. Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 3 Item Number 3 Godrej Interio La Sede Visitor Chair.1 ) Seat / Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather.Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 46.5 Cm. ( W ) X 59.5 Cm. ( D ) 3 ) Visitor Tubular Frame: The Tubular Frame Should Be Cantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Be Connected To Frame Through Chrome Plated High Pressure Die Case Connector Piece.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 4 Item Number 4 Godrej Interio Storwel Plain.Storwel Plain Shall Have An Overall Size Of 916Mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 5 Item Number 5 Godrej Interio Orlando P3 Seater Sofa.Overall Dimensions Of The 3 Seater Sofa Shall Be Width 1820Mm, Depth 920Mm , Height 890Mm, Seat Height 470Mm. Leather Thickness Shall Be 0.9-1.1 Mm And Pvc Thickness Shall Be 0.9 Mm. The Seating Foam Shall Have A Thickness Of 100Mm And Density Of 32 Kg / M3the Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 6 Item Number 6 Godrej Interio Orlando P Single Seater Sofa.Overall Dimensions Of The 3 Seater Sofa Shall Be Width 920Mm, Depth 920Mm , Height 890Mm, Seat Height 470Mm. Leather Thickness Shall Be 0.9-1.1 Mm And Pvc Thickness Shall Be 0.9 Mm. The Seating Foam Shall Have A Thickness Of 100Mm And Density Of 32 Kg / M3.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 7 Item Number 7 Godrej Interio Bloom Coffee Table.Overall Size : W X D X H - 1000 X 600 X 430Mm.1.Understructure: Legs, Top Wooden Frame & Bottom Tie Members Are Made Out Of First Qualityrubber Wood Without Knots & Defects On All Faces. Bottom Tray Is Made Of 1.2Mm Thick Mssheet. Metal Brackets Are Used For Assembly Purpose.2. Top: 8Mm Thick Toughened Glass.3. Construction: Knock-Down Assembly.4. Finish: Bloom_Coffee Table Is In Two Colour Finish Option -Ÿoption - 1 : Natural Finishÿoption - 2 : Walnut Finishwooden Members Are Pu Painted With Hardness-2H.Metal Components Are Powder Coated.Bottom Ms Metal Tray Is Having Floral Pattern Laser-Cut.Top Glass Is Having Sand Blasted Floral Pattern On Bottom Surface.5. Hardware: Knockdown Assembly With High Quality Standard Hardware Like Screws, Metalinserts, Wooden Dowel, Plastic Leg Bush Etc..The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 8 Item Number 8 Godrej Multiflex Shelving System 6 ( Height ) X 3 ( Width ) X Depth ( 18 ) With 6 Panels.Overall Dimensions Of The Rack Is 6 ( Height ) X 3 ( Width ) X Depth ( 18 ) With 6 Panels.Load Bearing Members Of The System Are Made Out Of High Strength Hr Steel Having Properties Equivalent To Grades Specified By Is 5986:2002 / Is 2062:2006.In Addition To High Strength, The Raw Material Used For Structural Load Bearing Members Posses Adequate Ductility To Ensure Toughness. The Material Also Has The Necessary Impact Strength For Cold Room Applications Up To -30 Deg C. All Fasteners Used Are Of Grade 8.8.These Are With Galvanized Finish To Suit Industrial Atmosphere.For Long Life And Protection From Corrosion, All Powder Coated Components Are Given A Thorough Antirust Treatment. The Dry Film Thickness ( Dft ) After Powder Coating Would Be Average 35 Microns.All Powder Coated Components Are Subjected To An Elaborate 4 Step, Six Zone Anti Corrosion Treatment, Viz. De-Greasing As Per Is 6005:1970, Rinsing, Phospating As Per Is 3618:1966 And Ro Water Rinsing.Complete Knock Down Construction. The Racks Are Grouted On Floor Using Expansion Bolts.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 9 Item Number 9 Godrej Interio Enterprise 1500W With Cpu Hanger.Enterprise 1500 Table With Cpu Hanger Size Shall Be 1500 Width Mm X 750 Depth Mm X 728 Height Mm . Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat ( Epoxy Polyster ) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube , Finish Powder Coat ( Epoxy Polyster ) .The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus The Drawer Front Shall Be 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) .The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 10 Item Number 10 Godrej Interio Enterprise 1500W Without Cpu Hanger.Enterprise 1500 Table Without Cpu Hanger Size Shall Be 1500 Width Mm X 750 Depth Mm X 728 Height Mm . Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat ( Epoxy Polyster ) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube , Finish Powder Coat ( Epoxy Polyster ) .The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus The Drawer Front Shall Be 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) . The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 11 Item Number 11 Godrej Interio Bravo Mid Back Chair.1.Seat / Back Assembly: The Seat And Back Should Be Made Up Of 1.2 ±0.1Cm. Thick Hotpressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. 3. Armrests :The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism: The Mechanism Should Be Designed With The Following Features: • 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment • Seat / Back Tilting Ratio Of 1:3. 5.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm.6.Telescopic Bellow Assemblythe Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.7.Pedestal Assembly:The Pedestal Should Be Injection Moulded In Black 33% Glass-Filled Nythe Manufacturing Company Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001, Bifma Membership Certificate, Greenguard By Ul Certificate As Applicable, Aiota Certificate, Data Sheet And Product Test Reports.Lon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors ) .8.Twin Wheel Castors:The Twin Wheel Castors Should Be Injection Moulded In Black Nylon.The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 12 Item Number 12 Godrej Interio Bravo Visitor Chair.1.Seat / Back Assembly: The Seat And Back Should Be Made Up Of 1.2 ±0.1Cm. Thick Hotpressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Should Be A.Back Size 47.5 Cm. ( W ) X58.0 Cm ( H ) Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Hr Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf For 25% Compression. 3. 3.Armrests :The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. 4. Tubular Frame: The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Should Be Cantilever Type & Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid. 13 Item Number 13 Godrej Interio Aero Large Seat With Neckrest.Seat / Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn.* Seat Size ( Larger Seat Depth ) : 47.0 Cm. ( W ) X 51.5 Cm ( D ) * Back Size : 45.0 Cm. ( / V ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression.Armrests : The Adjustable Armrest Is Designed With The Following Features :• Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top.• Fixed Armrest Top Is Pu Moulded Over Metal Insert.Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. • 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.» Tilt Tension Adjustment.• 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°. Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Center Dia Is 66.1+0.5 Cm.Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon.Neckrest : The Neckrest Assembly Consist Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. Neckrest Is Fixed To Back Assembly Through Neckrest Connector. Neckrest Assembly Has Weight Adjustment Of 4.2 + 0.5 Cm And Rotation Adjustment Of Oyerat! 76°+- 2°. The Complete Neckrest Assembly Is Retro Fit To The Main Chair..The Manufacturer / Oem Should Provide Along With Technical Bid Iso 9001, Iso 14001, Iso 45001, Iso50001 From Nabcb Accredited Agency. Bidder / Oem Should Have Bifma Membership Certificate, Greenguard By Ul Certified Product In Its Product Portfolio As Applicable And Aiota Certificate. Data Sheet And Product Test Reports Should Be Submitted In The Technical Bid
