Tender For Karur District - Kadavur Block - Agamt-Ii 2022-23 - Package No.01
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2022
0 days left
EMD
13570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kadavur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Building At Chinnandipatty H / O Kalayapatty Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Anganwadi building at Chinnandipatty H/O Kalayapatty Panchayat |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete |
| 3 | Supplying and Sand Filling from Approved Sourcesincludingcost and Conveyance of all materials etc., complete. |
| 4 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., |
| 5 | Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm includingcuring,finishing and cost & Conveyance of all materials etc., complete. |
| 6 | Re Filling the Excavated Gravel Fillingfor Basement Filling includingcost & Conveyance of all materials etc., complete. |
| 7 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X |
| 8 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete |
| 9 | RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excludingcentering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixingfan clamps and ixtures in rcc works wh |
| 10 | Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 11 | Plastering surfaces of RCC itemssuch as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete compl |
| 12 | Supplying and fixingP.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc |
| 13 | Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thicknes |
| 14 | Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 cm x 2 cm approved qty with,CM.1:312 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc |
| 15 | Supplying and fixing of cudappah slab 38/40mm inclding cost and conveyance and all labour charges etc complete., |
| 16 | Supplying and fixing in position Baby pan, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lim |
| 17 | Supplying and fixing in position ordinary colour glazed Eropean water closet of best quality and approved make with 100mm\" P\" or\"S\" trap with double flapped rigit P.V.C seat level flushing tank with 10 liters PVC low level Flushing tank with all internal fittings etc., complete complying with standared specification |
| 18 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete ., |
| 19 | Supplying and Paving the floor with Vetrified tiles 0.60mx0.60mx0.08m for approved quality cost and conveyance of all materials to site and all labour charges etc |
| 20 | Dadooing of walls with colour glazed tiles of size 300x200x6 mmof best quality including cost and conveyance of all materials to site and all labour charges etc |
| 21 | Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete. |
| 22 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete . |
| 23 | Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coatincluding the cost all materials etc.,complete, in all floors. |
| 24 | Fabricating Supply and fixing and position of MS Door with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covere |
| 25 | Door 0.90mx2.10m |
| 26 | D1 0.90mx1.20m |
| 27 | Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats cover |
| 28 | Window size 1.20m x 1.30m |
| 29 | Window size 1.10m x 1.20m |
| 30 | Ventilator 0.90m x 0.45m |
| 31 | Supplying and fixing following electrical arrangement |
| 32 | a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable (Light and Fan Point) |
| 33 | b)Supply and fixing tube light fittng and all labor charges tc complete |
| 34 | c)Supply and fixing CFL bulb and all labor charges tc complete |
| 35 | d)Supply and fixing PVC PLUG POINT and all labor charges tc complete |
| 36 | e)Supply and fixing of single Type street light Flu.fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light |
| 37 | f)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains |
| 38 | g)Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main |
| 39 | h)Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main |
| 40 | i)Supplying and fixing of 1200mm(40\")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp |
| 41 | j)Supplying and fixing of Excauste fan with stepped electronic 300W regulator with 1m down rod on the existing clamp |
| 42 | Provison for Water supply arrangements |
| 43 | a) 110mmdia PVC Pipe 6 ksc |
| 44 | b) 63mmdia PVC Pipe 4 ksc |
| 45 | c) 25mmdia PVC Pipe 10 ksc |
| 46 | d) 25mm dia PVC Tap |
| 47 | e) Water Tank |
| 48 | Provision for Rain water harvesting structure |
| 49 | GST Amount for providing Service to Government Contract Works for the above ConstructionWorks.GST Amount is the Total GST Amount for overall quoted amount above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Oct 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender