Tender For Construction Of Counseling Hall At Sub Collectors Office At Gunupur
Tender Value
14.29 Lakhs
Estimated cost
Bid Submission
09 Nov 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gunupur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Counseling Hall At Sub Collectors Office At Gunupur
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of Foundation trenches in hard soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 2 | Supplying, filling in foundation & plinth with sand of approved quality from approved quarry in 23.5cm (9\") thick layers including watering and ramming with cost, conveyance royalties, taxes of all the materials and labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge (Measurement shall be taken on finished compacted section only). |
| 3 | Cement Concrete of proportion (1:3:6) in foundation and floors using 40mm size hard black crusherbroken granite stonemetal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\") thick to required level ramming watering curing etc. including cost, conveyance,royalty and taxes of all materials with alllabour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 4 | RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work) ( Footing) |
| 5 | Plinth Beam |
| 6 | Roof Beam &column |
| 7 | Lintel |
| 8 | Roof slab |
| 9 | Chajjas |
| 10 | Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) |
| 11 | Fly ashbrick masonry in cement mortar (1:6) inFoundation and Plinth using clamp burnt bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 12 | Fly ashbrick masonry in cement mortar (1:6) in Superstructure using clamp burnt bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 13 | Fly ash brick masonry in cement mortar (1:4) using bricks of 23cm size having a crushed strength of not less then 75 sq.cm after immersing Bricks for six hours in waters befors use with watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect as directed by the Engineer-in-Charge. |
| 14 | 12 mm (1/2\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge . ( Out side of the Wall) |
| 15 | 16 mmthick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. ( In side of the Wall) |
| 16 | Providing 6 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. ( Slab ceiling plastering) |
| 17 | Providing 2.5 cm (1\") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 18 | Providing supplying fitting and fixing vetrifiedtiles(Colour/printedSeries) in floors of size using 600 mm x 600mm in sizeof approved make conforming to IS 13755 laid on 20mm thick cement mortar1:4 (1cement : 4 sand)and fillingjoints with whitecement of approved qualityincluding fixing tiles to proper slope / level mending sizes sizes including cost, conveyance, taxes and royality of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge. |
| 19 | Supplying, fitting, fixing of tile in dadoo marbonite or equivalent make in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.Vertified tiles ( 600mm x 600mm) ( Homogeneous) |
| 20 | fitting, fixing of all types of MS Grills / Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 21 | fitting and fixing of all types of MS Door / Shutters with all required iron and aluminum fittings, fixing the framed shutters in proper position including mending to sizes after cutting grooves in choukaths/walls and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, automatic door closers, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including all labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 22 | fitting and fixing of all types of MS window with all required iron and aluminum fittings, fixing the framed shutters in proper position including mending to sizes after cutting grooves in choukaths/walls and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, automatic door closers, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including all labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 23 | Supplying, fitting , fixing up window (sliding type) made up aluminum section 9778 as windows frame section No.4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P excluding cost of glassetc. complete as per direction of Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of 5mm thick black Glass for aluminium sliding window including cost, conveyance, royality and taxes of all materials and labours with T&P required for the work etc. complete in all respects as per the direction of the Engineer-in-Charge. |
| 25 | Painting one coat of primer to plastered surface works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 26 | Finishing wall surfaces with two coats of wall putty of approved shade on new works to give an even shade over prepared surfaces including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(On first floor) |
| 27 | Finishing wall surfaces with Plastic emulsion paint (Interior Grade) of approved shade on new works two coats to give an even shade over prepared surfaces including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 28 | Finishing wall surfaces with distemper 2 coat of approved shade on new works to give an even shade over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 29 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete.including cost, conveyance, royalityes, labour, T&P etc. complete for the work as directed by the Engineer-in-charge. |
| 30 | Painting Two coatswith any approved Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge |
| 31 | Providing fitting and fixing of False ceiling with 12.5mm thick gypsum board. Aluminium anadised T Section No. 3215 with 2\"-0\" centre to centre, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium Grid 2\"-0\" x 2\"-0\" suspended from ceiling etc. complete.including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 32 | Supplying and fixing gypsum boarderincluding cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
AI Tender Summary
Tender Timeline
Oct 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender