Supply Of Bends For Coal Mills ( Hp-1103 ) To Rgtpp Khedar Hisar On Annual Rate Contract Basis , Supply Of Bends For Coal Mills ( Hp-1103 ) To Rgtpp Khedar Hisar On Annual Rate Contract Basis , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 1650 Mm , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 1750Mm Including Length Of 150Mm Without Ceramic Tiles At Non-Flanged End. Specification Of Ceramic Tile: , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 950Mm Including Length Of 150Mm Without Ceramic Tiles At Non-Flanged End. Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 2120 Mm , Pc Pipe Bend With Bend Angle=60, R=1000. L1=300, L2=1400, L3=200, L4=200, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Pc Pipe Bend With Bend Angle=57, R=2100. L1=400, L2=1400, L3=200, L4=200, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Pc Pipe Bend With Bend Angel =51.1 Degree, R=1000, L1=300, L2=1400, L3=200, L4=200, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Pc Pipe Bend With Flange With Bend Angle=50 Degree, R=1000, L1=400, L2=9, L3=200, L4=0, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug , Pc Pipe Bend With Bend Angle = 40 Degree, R=2100, L1=400, L2=1400, L3=200, L4=200, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Pc Pipe Bend With Bend Angle = 50 Degree, R=2100, L1=400, L2=736, L3=200, L4=0, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Short Bend ( Boiler End ) With Weldable Ceramic Tiles, Angle-90 Degree Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture Testing Of Ceramic Tile From Cgcri Approved Laboratory. , Pc Pipe Bend With Bend Angle = 90 Degree, R=1000, L1=300, L2=1400, L3=200, L4=200, Moc: Mild Steel Api 5L Grade-B Lined With Ceramic Tiles Welded With Weld Plug. , Bend For Coal Mill, Bend Angle=90, R=1400. L1=300, L2=1400, L3=200, L4=200, Moc Of Bend:- Api 5L Grade-B, Ms, Id Of Bend After Applying Ceramic Tile=684Mm . Specification Of Ceramic Tile: Thickness-15 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture Testing Of Ceramic Tile From Cgcri Approved Laboratory. , Centre Feed Pipe With Cone For Coal Mill Moc: Ss304 , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 1850Mm Including Length Of 150Mm Without Ceramic Tiles At Non-Flanged End. Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture Testing Of Ceramic Tile From Cgcri Approved Laboratory. , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 2340Mm Including Length Of 150Mm Without Ceramic Tiles At Non-Flanged End. Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture Testing Of Ceramic Tile From Cgcri Approved Laboratory. , Ms Pipe With Flange At One End And Ceramic Tiles At Inner Side, Id Of Pipe After Application Of Ceramic Tile Is 684Mm, Length 2050Mm Including Length Of 150Mm Without Ceramic Tiles At Non-Flanged End. Specification Of Ceramic Tile: Thickness-12 Mm, Weldable With Plug, Alumina Content More Than 90%, Hardness More Than 8 On Mohs Scale, Colour-White, Bulk Density More Than Tha 3.2 Gm / Cc, Water Absorption Less Than 0.5%, Cold Cushing Strength More Than 3000Kg / Cm2, Flexural Strength ( At Room Temperature ) More 2200Kg / Cm2, Flow Medium Is Pulverized Coal Mixture Testing Of Ceramic Tile From Cgcri Approved Laboratory.
