Tender For Constt. Of Csc At Bann Near Baba Surgal Dev Sathan
Tender Value
3 Lakhs
Estimated cost
Bid Submission
04 Nov 2022
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
marheen → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Constt. Of Csc At Bann Near Baba Surgal Dev Sathan
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed: |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 7 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 12 | Foundation |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 15 | 15 mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement :4fine sand) |
| 16 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 17 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 18 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 19 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate |
| 20 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making the walls etc.: Internal work-Exposed on wall |
| 26 | 15 mm dia |
| 27 | 20 mm dia |
| 28 | Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work)15mm dia nominal bore |
| 29 | Providing and fixing wash basin with C.I /M.S brackets 15mm C.P bras pillar taps , 32mm C.P bras waste of standard pattern , including Painting of fittings and brackets , cutting and making the goodwalls wherever . white vitrerous China . size wash basin 630x450mm with pair of 15mmc.p brass pillar tap .(make cera/equivalent) |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent) |
| 31 | Providing and fixing 600x450mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board .ground fixed to wo0den cleats with C.P bras screws and washer complete |
| 32 | Providing and fixing PTMT grating of approved grating of approved quality and colour . circular type 125mm nominal dia with 25mm waste hole(make jaquar/cera/equivalent) |
| 33 | Providing and fixing cpbib cock of approved quality 15mm nominal bore complete job (make jaquar/ cera /equivalent) Short nose |
| 34 | Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .(make jaquar/cera/equivalent) |
| 35 | Providing and fixing 110mm dia. PVC waste water / sewerage pipe of 4 kg pressure per sqm of supreme / prince/ finoeix make prakash surya |
| 36 | Providing and fixing unplasticised PVC connection pipe with brass union 30cm length 15mm nominal bore |
| 37 | Providing and fixing of 600x120x5 mm glass shelf with edges round off supported on aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws etc make jaquar/cera |
| 38 | Providing and fixingball valve ( brass) of approved quality complete high or low pressure with plastic floats15mm dia nominal bore |
| 39 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Refer CPWD DSR E&M 2018 Item No. 1.10.1). Havells/Anchor/Equivalent make |
| 40 | Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess , including providing and fixingg 3 Pin 5/6 A modular socket outlet and 5/6A modular switch connection etc as reqd Havells/Anchor/Equivalent make |
| 41 | Suppling and fixing 5A to 32A rating, 240/415 V , 10 kA, \"C\" Curve , miniture circuit breaker suitable for inductive load of following poles in the existing MCB, DB complete with connection, testing and commissioning etc as reqd Havells/Anchor/Equivalent make |
| 42 | SupplyofLED Lamp 9 watt.Havells/Anchor/Equivalent make |
| 43 | Supplying and fixing 16 mm sq 2core aluminium cable as required.Havells/Anchor/Equivalent make |
| 44 | Supplying and fixing 16 mm sq 2core aluminium cable as required.Havells/Anchor/Equivalent make |
| 45 | Providing and fixing Motor pump of½ HP of sharp ,bajaj,or equivalent make including fittings (complete job) |
| 46 | Providing and fixing soap dish of approved quality |
| 47 | Providing and fixing white vitrous china pedestal typewater closet( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled deviceconforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent) |
| 48 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: semi rigid pipe 32 mm dia |
| 49 | Providing and fixing 4\"pvc floor trap of app make and manufacturers |
| 50 | Providing and fixing soil, waste and vent pipes :75 mm diameter. 75 mm diameter. 18.35.2.1 Sand cast iron S and S pipe as per IS:1729 |
| 51 | Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R. |
| 52 | Carriages of Materials |
| 53 | sand + Aggregates 04 Km By MT |
| 54 | Bricks for 4 kms |
AI Tender Summary
Tender Timeline
Oct 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender