Tender For T-07/Ahd/2X210mw/Btps/2022-23, Jhansi-Uttar Pradesh

Repairing Reclamation Of Spares Of Ahp Camd 2 210Mw Btps Parichha- 1 ( A ) Repairing Of Pin Wheel Arrangement – I Of Esp 2 Repairing Of Pin Wheel Arrangement –Ii Of Esp / Mhv Seat And Slide 3 Repairing / Reclamation Of Grip Coupling Of Eerm Of Esp. 4 Fabrication Of Shaft Sleeve Ss410 Of Clinker Grinder, Hp / Lp / Eco. / Slurry Pump Shaft 5 Fabrication Of Hp / Lp Pump Shaft . 6 Repairing Of Glove Valve / Gate Valve / Nrv ( Nb-150 / 200 Mm ) 7 Fabrication Of Clinker Grinders Fluid Coupling Shaft 8 Repairing Offluid Coupling Of Clinker Grinder 9 Fabrication Of Neck Ring / Throat Bush Of Ash Slurry Pump. 10 Repairing Of Cerm / Eerm Shaft.Moc Ss410 11 Repairing Of Grinding Roll Of Clinker Grinder. 12 Repairing Of Brass Bush To Fit With Spindle Of Valves / Volute Linear / Frame Plate Linear Insert Of Ash Slurry Pump. 13 ( B ) Straightening, Repairing & Reconditioning Of Acw Pump Impeller Shaft / Line Shafts / Top Shaft Of Acw Pump Moc: Ss-304. 14 Fabrication Of Line Shaft Sleeve / Top Shaft Sleeve For Acw Pump And Fitting Over The Shafts Including Material ( Moc: Ss-316 ) . 15 Fabrication, Repairing & Reconditioning Including Dynamic Balancing Ofimpeller Of Acw Pump ( Moc: Ss-Astm-A351-Cf8m ) 16 Fabrication & Reconditioning Of Pump Shaft From Old & Used Material ( Ss-304 ) 17 Fabrication Of Top Shaft Sleeve / Line Shaft Sleeve ( Ss-316 ) 18 Fabrication Of Bearing Inter Bowl / Bearing Suction / Discharge Case / Packing Box Bush With Its Fitting ( Bronze Is-318 ) 19 Fabrication Of Rubber Bush For Bowl Body With Fitting ( Cut Less Natural Rubber ) 20 Repairing & Reconditioning With Dynamic Balancing ( Metalizing & Machining ) Of Impeller For Raw Water Pump ( Ss-304 ) 21 Bearing Inter Bowl Body Bush As Per Sample ( Old & Used ) 22 Discharge Case Bush / Bearing Suction Bush / Packing Box Bush / Spider Bush As Per Sample ( Old & Used )

INR 1180 /-

INR 25000.0 /-

Refer document

Name of Work: Repairing/Reclamation of spares of AHP/CAMD, 2x210MW, BTPS, Parichha

Sl. No.	Item Description
1	(A) Repairing of Pin Wheel arrangement – I of ESP
2	Repairing of Pin Wheel arrangement –II of ESP/MHV Seat and Slide
3	Repairing/ Reclamation of Grip Coupling of EERM of ESP.
4	Fabrication of Shaft Sleeve SS410 of Clinker Grinder, HP/LP/Eco./Slurry Pump shaft
5	Fabrication of HP/ LP pump shaft .
6	Repairing of glove valve/gate valve/NRV ( NB-150 / 200 mm)
7	Fabrication of clinker grinders fluid coupling shaft
8	Repairing offluid coupling of clinker grinder
9	Fabrication of neck ring/ throat bush of ash slurry pump.
10	Repairing of CERM/EERM Shaft.MOC SS410
11	Repairing of grinding roll of clinker grinder.
12	Repairing of brass bush to fit with spindle of valves/Volute linear/frame plate linear insert of ash slurry pump.
13	(B) Straightening, Repairing & reconditioning of ACW Pump impeller shaft/line shafts/Top shaft of ACW Pump MOC: SS-304.
14	Fabrication of line shaft sleeve/Top shaft sleeve for ACW Pump and fitting over the shafts including material (MOC: SS-316).
15	Fabrication, repairing & reconditioning including dynamic balancing ofImpeller of ACW Pump(MOC: SS-ASTM-A351-CF8M)
16	Fabrication & reconditioning of pump shaft from old & used material (SS-304)
17	Fabrication of top shaft sleeve/Line shaft sleeve (SS-316)
18	Fabrication of bearing inter bowl/Bearing Suction/Discharge Case/Packing Box Bush with its fitting (Bronze IS-318)
19	Fabrication of rubber bush for bowl body with fitting (Cut less Natural Rubber)
20	Repairing & reconditioning with dynamic balancing (Metalizing & machining) of impeller for raw water pump (SS-304)
21	Bearing inter bowl body bush as per sample (Old & Used)
22	Discharge case bush/Bearing suction bush/Packing box bush/Spider bush as per sample(Old & Used)