Tender For Construction Of Shopping Complex Part-1 At Gp Pimpalwad Mh Tal Chalisgaon Dist Jalgaon
Tender Value
1.29 Crore
Estimated cost
Bid Submission
01 Nov 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chalisgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Shopping Complex Part-1 At Gp Pimpalwad Mh Tal Chalisgaon Dist Jalgaon
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthe bedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstrutting etc.complete.(Liftupto1.50m)ByMechanical Means |
| 3 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating thebottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifos persquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredand curingcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Typemixer/concreteBatchmixplant(Panmixer)etc.complete. Withfineaggregate(CrushedsandVSIGrade) |
| 5 | Providingsoling using80 mm sizetrap metal in 15 cm. layer includingfilling voidswithCrushed sand/grit, ramming, watering etc. complete. |
| 6 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsand steel stanchionsetc. including bailing out water,Steelcentering formwork, laying/pumping cover blocks, compaction and curingrougheningthesurfaceifspecialfinishistobeprovided(Excluding reinforcementandstructuralsteel)etc.complete,withfullyautomaticmicroprocessorbasedPLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering,formwork,coverblocks,laying/pumping,compactionfinishing the formedsurfaceswithcement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirected including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening thesurfaceifspecialfinishistobeprovidedand curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (CrushedsandVSI Grade) |
| 9 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metalforR.C.C. slabsand landings as perdetailed designsand drawingsincludingsteelcentering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Typemixer/concreteBatchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal forR.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks, laying/pumping,compactingand rougheningthesurfaceif specialfinishistobeprovidedandcuring complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovided andcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessor basedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-20oftrap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawingsoras directedincludingsteelcentering, formwork,steelprops,laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface orrougheningthesurfaceifspecialfinish istobeprovided andcuringetc.complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.)withfully automaticmicro processorbasedPLCwithSCADAenabledreversibleDrum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 14 | Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm.layersincluding watering and compacting etc. complete. |
| 15 | Fillinginplinthandfloorswithcontractors material/broughtfromoutsideandapprovedbyEngineer incharge inlayersof15cm to20cmincludingwateringandcompactionetc.complete. |
| 16 | Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingor asdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecial finish is to be provided, finishing uneven and honeycombedsurfaceandcuringetc.complete.The CementMortar1:3plasterisconsideredforrenderingunevenandhoneycombedsurfaceonly.Newlylaid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 17 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. |
| 18 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure includingstrikingjoints,rakingoutjoints,wateringandscaffoldingetc. Complete |
| 19 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out jointsand watering etc. complete. |
| 20 | ProvidingandfixingM40gradethickvibratedpullcastorsimilartypeconcreteframewithchamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/candfixing inwall with 6 Nos of hold fast of 12 mmdia bars 500 mmlong includingprimerandoilpaintingetc,complete) frame size 60 mm x 100 mm . |
| 21 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mmthickstyleandrailwith25mmthickpanelswithopenablefanlightasperdetailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures andfasteningand finishingthewood workwithoilpainting3coats.(Excludingthedoor frame) |
| 22 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldingsandlipping,wroughtironholdfasts,chromiumplated fixtures and fastenings, with brass mortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. complete. |
| 23 | Providing andfixing 30mm thick PVCFLUSHLDOORSHUTTERconsisting ofpanelofhollowPVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom railsandtwo19x19mm MStubes insertedhorizontallyinsidethe hollowprofile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thickx20mmwidthonstilesandrailsusingsolventcement.The innerpanelshallbe laminatedwith5mm thicktermite proofwaterproof plain/prelam PVCsheet using solventcement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. |
| 24 | Providing andfixing inposition.(asperI.S.1868/ 1982)Aluminium sliding window oftwo tracks with rectangularpipe having overalldimension63.50x38.10x1.02mm atweight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/Running metre.Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/Running metre. The shuttershouldbeofbearingbottom40x18x1.25mmatweight0.417Kilogram/Runningmetre.Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x1.25mmatweight0.417Kilogram/Runningmetre.andtopsection40x18x1.25mmatweight0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in chargewithall necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. |
| 25 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) |
| 26 | Providingandfixing900mm highS.S.304Grade Stainlesssteelrailingwith40mm diameterand 1.5mm thickattop,40mm diameterand 1.5mm thickverticalsupportsspaced at 1.5m center tocenter and 8mm thick toughened glass including fabricating ,fixtures, errecting ,necessarywelding,grinding,finishing, buffing to stainless steel pipe etc. complete |
| 27 | Providing andfixing in position powder coated aluminium louvered windows / ventilator of varioussizes withpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38 mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. |
| 28 | Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 29 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 30 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curingetc. complete. |
| 31 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoat roughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurface bytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 32 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providingand laying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/perbagofcementlayingbrickbatcobaof requiredthicknessincm1:5 with waterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48hoursbypondtestandcoveringtenyears\"guaranteeonrequisitestamppaperincludingcuringetc.complete. |
| 33 | Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement morarincludingneatcementfloat,fillingjoints, curing and cleaning etc. complete. |
| 34 | Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approvedmake,shadeand pattern for dado and skirting in required position fixed in 1:4cementmortarincludingneatcementfloat, filling joints, curing and cleaning. etc. complete. |
| 35 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (groupDII-A)and7to8mm thickforflooring inrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 36 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to correspondingI.S.for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 37 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick andrequired widthinplain/diamondpatternonbed of1:6 C.M.including cementfloat, filling joints withneatcement slurry, curing, polishing and cleaningetc. complete. |
| 38 | ProvidingandlayingmachinecutmachinepolishedmachinecutKotastoneslabs20to25mm thickfor treads andrisers of steps andstaircases, withroundednosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 39 | Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / OceanBrown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 40 | Providing andlaying intrenches50mm dia.medium gradehaving embossedasISIMark galvanised iron pipes ?of 5.17 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and withprimer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessaryandconveying andstacking the same in PWD chowky or as directed etc. complete. |
| 41 | Providingandfixingonwalls/ceiling/floors,50mmdiaheavygradehavingembossedasISIMark galvanised iron pipesweight of6.33 Kilogram/meterwith necessaryfittings.andremakinggood the demolishedportionandprimerofanticorrossiveoilpaint2coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. |
| 42 | Providing andlaying intrenches40mm dia.medium gradehaving embossedasISIMark galvanised iron pipes ?of 3.68 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and withprimer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessaryandconveying andstacking the same in PWD chowky or as directed etc. complete. |
| 43 | Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation,fittings. Refillingtrenchesetc.complete.Includingremovingexistingpipelineif necessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete. |
| 44 | Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation,fittings. Refilling trenches etc. completeIncludingremovingexistingpipelineif necessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete. |
| 45 | Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete |
| 46 | Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass includingnecessary sockets/union nut complete. |
| 47 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass includingnecessary sockets/union nut complete. |
| 48 | Providing and fixing chromium platedtowel rod 16 mm dia and75 cm. in lengthincluding all accessories complete. |
| 49 | Providing andfixing 450mm x550mm size superiortype Belgium mirrorwith16mmdia. nickel plated towel rod etc. complete. |
| 50 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 51 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap withsymphoniclowlevelwhiteglazed10litrescisternwithblackbackliteseatwithall necessary pipe connection etc. complete. |
| 52 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connectionincluding P.V.C. waste pipe andtrapup to the outside face ofthe wall.Making goodthedamaged surface, testing etc. complete. |
| 53 | Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete. |
| 54 | Providing, laying andfixing P.V.C. pipe of 110mm. dia. withfittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removingexistingpipelineif necessaryandconveyingandstackingthesameinPWD chowky or as directed etc. complete. |
| 55 | Providingandfixing15cmx10cmsaltglazedstonewaregullytrapincementconcrete1:4:8outsidethe building including castirongrating inthe sink,connecting glazedstoneware pipe,brick masonrychamberwith cast iron lid and cast iron grating for the gully trap. |
| 56 | Providing andconstructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raftinB.C.soil area includingcost of reinforcement, 1:2:4 cement concretechannels halfroundG.S.W.pipes,Brick Masonry,plasteringfrominsideandairtight75mmthickR.C.C.covermediumduty100Kilogrametc.complete. |
| 57 | ProvidingandconstructingBrickMasonryinspectiontrapChamber90cmx45cmincluding1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, saltglazed stone-ware interceptingtrapwithroddingpipesetin1:4:8cementconcreteblock, brickmasonryplasteringinside andOutside,fixedincementconcretewithR.C.C.Cover medium duty 140 Kilogram. etc complete |
| 58 | Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including 1:4:8C.Cfoundation,1:2:4C.C.channels/halfroundglazedstonewarepipechannel,saltglazed stone-ware interceptingtrapwithroddingpipesetin1:4:8cementconcreteblock,brick masonry plastering inside and Outside, with C.I. lead cover of 75Kilogramwith frame fixed in cement concrete. |
| 59 | Providing andlaying for 150 mm dia salt glazedstoneware pipe including fittings Suchasbends, tees, single junction, double junctions laying, jointing (including excavation andrefillingthe trenches) complete. |
| 60 | Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth withholes or notches as required, bottom and top sides of 1.6 mm M.S. sheetfixedwith3.5mm dia.roundheadedscrewstogetherwith12mm dia.M.S.barbentto shapewithhooked ends for fan hook and painting to exposed surface |
| 61 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 62 | Providingandapplyingtwocoatsofwaterproofcementpaintofapprovedmanufactureandofapproved colourtoold plasteredsurfacesincludingscaffoldingifnecessary,cleaningandpreparingthesurface,watering for two days etc.complete. |
| 63 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,to concrete,bricksurface,inallpositionsincludingscaffoldingandcuringetc.complete. |
| 64 | Providing andfixing White GlazedEarthenware full stall type Urinal withP.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside faceof the wall |
| 65 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity withfitting, inlet pipes andstop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe withfittings andflushing arrangement including lead soil pipe, lead trap, soil pipe connectionupto the outside face of the wall |
| 66 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and builtcorrugatedinclusiveofdeliveryuptodestinationhoistingand fixing of accessories such as inlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 liters |
| 67 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and withnecessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc.complete. |
| 68 | Providing andlaying insitu/ready mixcementconcrete ofM-10proportionwithtrap/ granite/quartzite/ gneissmetalinfoundationincludingnecessaryformwork,compactingandcuringetc.complete.(with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSIsand finely washed etc ) |
| 69 | Providing cast in situ / ready mix M10 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing andcuring etc. complete. (withreversible drum type mixer/concretebatchmixplant(panmixer) withSCADAwithfine agreegatesofrequiredspecifications (Natural sand / VSI sand finely washed etc ), cement 4.05 bags/cumt) |
| 70 | Providing andfixing mild steelgrill workfor windows,ventilators etc.20 Kilogram/Square Metre as per drawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and twocoats of oil painting complete. |
| 71 | Providingandfixing90cmx60cmMarbleplateengraving10cm.heightletter,figures including painting the lefters/figures with approved colour and shade complete |
| 72 | Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats. |
| 73 | Appointing Expert /Professional Consultant for selectionofBandhara sitesupto 100 m length having minimum 2 visits per bandhara , noting the broad features like span, height, type of foundation, special features specific to the site to come to the conclusion of adopting standard design & drawing, checking suitabilityofsite,finalizingsiteforconstructionofBandharaandsubmittingtheobservationnote accordingly to Department. ( Transporation from Regional Head quarter to actual site and accomodation atsite/Talukaheadquarter/DistrictHeadquarterisnotincludedinthisitemanditshallbepaid separately wherever necessary.) |
| 74 | GST |
AI Tender Summary
Tender Timeline
Oct 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender