Dismantling Works Carefully Dismantling / Disengaging And Removing Following Items From Renovation Area In Approved Methods And As Directed By The Banks Engineer. The Indicative Items To Be Dismantled With Approx. Dimensions Are As Under: A ) 115Mm Thick Brick Wall With Both Side Plastering, Rcc Lintels Etc. Of Approx. Overall Measurements 900Mm X 3600Mm - 2 Nos, 5500Mm X 3600Mm - 2Nos ( Account Section Walls ) B ) Cutting And Enlarging One Window Opening In Brick Wall In Internal Corridor To Accomodate A Double Door ( 110 X 120 Cm Window Opening To Be Enlarged To 150 X 210 Cm Opening For Door ) , Making Good The Damages In Side Walls Etc. C ) 250Mm High Marble Mosaic Skirting With Back Plaster Of Approx...... For Full Details, Please Go Through The Tender Documents. 2 2 Plastering Preparing The Surface Of The Masonry / Rcc Walls By Raking, Watering And Thorough Cleaning Using Wire Brush, Broom, Providing And Applying Average 20 Mm Thick Cement Plaster Using Cm 1:4 Using Approved Quality Opc And Sand, True To Plumb, Level And Line Match With Adjoining Surfaces Etc. The Wall Plaster Shall Have An Even Surface And Shall Be Finished Smooth. The Rate Shall Include For Curing, Labour, All Leads And Lifts, Etc. Required For The Finished Work, Removal Of Debris Etc All Complete As Directed By The Banks Engineer. 3 3 Vitrified Tile Flooring Preparation Of Surface By Thoroughly Hacking The Existing Flooring, Cleaning The Surface, Providing And Laying Vitrified Tiles ( 600 Mm X 600 Mm Or Nearest Available Size ) , In Floor Of Approved Quality And Make ( Exact Shade To Be Got Approved By The Bank ) Over The Prepared Surface Of Existing Floor Using Approved Make Polymer Modified Quick Setting Adhesive Of Average 6Mm Thickness And The Adhesive Spread Fully Over The Whole Base Area Of The Tile ( If Any Undulations In The Floor, The Same Shall Be Levelled Using Polymer Modified Mortar ) For Proper Binding Of The Tiles And Pointing The Joints To Correct Lines And Levels With Epoxy Grout Of Matching Shade, Etc...... For Full Details, Please Go Through The Tender Documents. 4 4 Vitrified Tile Skirting Preparing The Surface Of The Walls To Receive The New Skirting By Watering And Cleaning, Providing And Fixing 100 Mm Height Skirting Cut Out Of 600 X 600 Mm Or Approved Size Vitrified Tiles Of Approved Make And Shade Over A Back Plaster Using Cm 1: 4 ( One Approved Quality M. Sand : 4 Opc ) For The Required Thickness, True To Plumb And Line, Set With Grey Cement Paste And Joint Pointed With Epoxy Grouts Of Approved Make And Quality To Match With The Shade Of The Tile. The Rate Shall Include Machine Grinding And Buffing Of The Exposed Edges / Sharp Corners, Machine Cutting, Curing, Cleaning Of The Finished Work, All Leads & Lifts, Etc Required For The Finished Work All As Directed By The Banks Engineer...For Full Details, Please Go Through The Tender Documents. 5 5 False Ceiling Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Approved Make Special Sections, Power Pressed From M.S. Sheets And Galvanized Zinc Coating Of 120 Gm / Sq M ( Both Side Inclusive ) As Per Is:277 And Consist Of The Following: ( I ) Angle Cleats Of Size 25Mm Wide X 1.6Mm Thick With Flanges Of 27Mm And 37Mm, At 1200Mm C / C, One Flangefixed To The Ceiling With Dash Fastener 12.5Mm Dia X 50Mm Long With 6Mm Dia Bolts ( Ii ) The Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.5Mm Of Required Length With Nuts And Bolts Of Required Size.....For Full Details, Please Go Through The Tender Documents. 6 6 Laminated Plywood Ceiling Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized Zinc Coating Of 120 Gm / Sq M ( Both Side Inclusive ) As Per Is:277 And Consist Of The Following:. ( I ) Angle Cleats Of Size 25Mm Wide X 1.6Mm Thick With Flanges Of 27Mm And 37Mm, At 1200Mm C / C, One Flangefixed To The Ceiling With Dash Fastener 12.5Mm Dia X 50Mm Long With 6Mm Dia Bolts ( Ii ) The Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.5Mm Of Required Length With Nuts And Bolts Of Required Size. ( Iii ) The Other End Of Angle Hanger Fixed With Intermediate G.I Channels 45X15x0.9Mm Running At The Spacing Of 1200Mm Centre To Centre......For Full Details, Please Go Through The Tender Documents. 7 7 Granite Sill For Windows Providing And Fixing Minimum 18Mm Thick Mirror Polished Granite Slabs ( 150 To 200Mm Wide ) Of Jet-Black Shade For Sills Of Windows In Single Piece In True Level, Line Etc Fixed With 20Mm Thick Base Cement Mortar 1:4 In Full Width Of Wall. Rates Shall Include For Preparation Of Surface, Full Round Moulding Of Exposed Edges Of Granite And Polishing The Same To Mirror Finish Etc. All Complete As Directed By The Banks Engineer. 8 8 Powder Coated Aluminium Windows Providing, Fabricating And Fixing Powder Coated Aluminium Sliding Windows ( Two Shutters ) Of Approved Make And Quality With Glass Panels As Detailed Below. The Bottom Frame Is Of 61.85 X 31.75 X 1.50Mm Size With Minimum Weight Of 0.909Kg / Mtr, Sides And Top With Sections Having Minimum Weight Of 0.784Kg / Mtr Etc. The Sliding Shutter Sections Shall Be Of 40X18x1.55Mm With Minimum Weight Of 0.547Kg / Mtr Etc. And Interlocking Sections With Min. Weight Of 0.607Kg / Mtr. The Frame Work And Shutters Shall Be Powder Coated In Approved Shade With A Minimum Thickness Of 50 Micron. Sliding Shutters Are Provided With 4Mm Thick Plain Reflective Glass Fitted To The Frame With Epdm Gaskets Etc..... For Full Details, Please Go Through The Tender Documents. 9 9 Paneling To Columns Providing And Making Paneling To The Columns As Per The Detailed Sketch Attached And With The Following Specifications. The Frame Work For Column Panelling Shall Be Made With 50Mm X 25Mm X 1.50Mm Anodized Aluminium Extrusion Of Approved Make, Vertically At All Corners, And Horizontal Members All At Not More Than 600Mm C / C In True Line, Plumb Etc ( Necessary Projections From Column Surfaces Shall Be Provided By Fixing Additional Supports Wherever Required ) . The Grid Formed Above Shall Be Covered With 12Mm Thick Exterior Grade Mdf Board Of Approved Make Using Gi Counter Sunk Screws At Required Spacing...... For Full Details, Please Go Through The Tender Documents. 10 10 Panelling To The Exterior Wall Inside Gms Cabin The Frame Work For Wall Panelling Shall Be Made Out Of 50Mm X 25Mm X 1.5Mm Anodized Aluminium Extrusion Of Approved Make Both Ways ( Horizontal & Vertical ) Not More Than 600Mm C / C And Additional Frames At Corners Of Windows Etc. ( Necessary Projections From Wall Surfaces Shall Be Provided By Fixing Additional Supports Wherever Required ) . The Grid Formed Above Shall Be Covered With 12Mm Thick Exterior Grade Mdf Of Approved Make ( Up To 75Mm Above False Ceiling Level ) Using Gi Counter Sunk Screws At Required Spacing..... For Full Details, Please Go Through The Tender Documents. 11 11 Double Skin Fuly Panelled Partition Providing And Fixing Double Skin Fully Panelled Type Full Height Partition For Gms Cabin, Storage Room And Server Room: Providing And Fixing Double Skin Partition Upto Bottom Of False Ceiling As Per The Specifications Below. - The Frame Work For Partition Shall Be Made With Anodized Aluminium Scetions 50Mm X 50Mm X 1.5Mm @ 600Mm C / C Both Ways. The Vertical And Horizontal Members Shall Be Joined Together Using 2 Numbers Of 50 Mm X 50 Mm X 40 Mm X 2 Mm Thick Anodised Aluminium / G.I Cleats For Each Junction, Fastened With 15 Mm X 3.5 Mm Self-Tapping G.I Screws.... For Full Details, Please Go Through The Tender Documents. 12 12 Double Skin Partly Glazed Panelled Partition Providing And Fixing Double Skin Partly Glazed & Partly Panelled Partition Of 1200Mm To 1500Mm Height Consist Of Following Details. The Frame Work For The Partition Shall Be Made Out Of 50Mm X 50Mm X 1.50Mm Anodized Aluminium Sections With Spacing Not More Than 600Mm C / C Both Ways ( Horizontal & Vertical ) . The Vertical And Horizontal Members Shall Be Joined Together Using 2 Nos Of 50 Mm X 50 Mm X 40 Mm X 2 Mm Thick Anodised Aluminium / G.I Cleats For Each Junction, Fastened With 15 Mm X 3.5 Mm Self-Tapping G.I Screws. The Frame Work Fabricated As Above Shall Be Firmly Fixed To The Floor At Bottom Using Suitable Size Fasteners..... For Full Details, Please Go Through The Tender Documents. 13 13 Fully Glazed Partition Fully Glazed Partition ( With Frameless Toughened Glass ) Upto Bottom Of False Ceiling For Gm Cabin: Providing And Fixing At Site 10 Mm Thick Approved Make Toughened Glass Fixed Partition For Cabins Up To The Bottom Of False Ceiling Using Glass Panes Not More Than 1.50 Metres Width And Full Height, Glass Panels Shall Be Fastened To The Top Edge Of The Partitions And At Bottom Using ?Enox? / ?Dorma? Or Approved Equivalent Make Stainless Steel ?Patch Fittings? ( 4 Numbers - 2 Numbers At Top And 2 Numbers At Bottom Including Cost And Conveyance Of All Materials To Site, Lead, Lift, And Labour Charges For Erection Etc...... For Full Details, Please Go Through The Tender Documents. 14 14 Teakwood Door With Shutter At The Entrance Providing And Fixing Teak Wood Framed Door With Shutters Of Approx. Overall Size 1500Mm X 2100Mm Similar To That Available In Nearby Location With Following Specifications. A ) The Door Frame Having Finished Cross Sectional Dimensions 150Mm X 62.5Mm Made With Best Quality Seasoned Teak Wood Fixed To The Wall With 3 Nos Of M.S. Holdfasts Of Required Size On Each Side, Embedded In Cement Concrete With Stone Chips ( 1:2:4 ) Fitted And Fixed Complete, Applying Two Coats Of Black Anti Termite Paint On The Surfaces Abutting The Brick / Rcc Etc....... For Full Details, Please Go Through The Tender Documents. 15 15 Flush Door Shutters Fixed On Partitions Providing And Fixing Minimum 30Mm Thick Solid Flush Door Of Phenol Formaldehyde Bonding Structure Of Approx. Size 900 / 800 X 2050Mm In Single Leaf With External Lipping Etc. The Exposed Face Of Door Shutter Shall Be Pasted With 1Mm Thick Laminate Of Approved Make And Shade On Both Sides ( Using Different Shades Of Laminate If Necessary ) As Per The Pattern And Design As Shown In The Drawing. Shutters Shall Be Provided With 6 Mm Thick Plain Glass Panels Of Required Size As Per Drawing With Teak Wood Beading Of Size 12 Mm X 12 Mm Etc...... For Full Details, Please Go Through The Tender Documents. 16 16 Frameless Door Shutter Providing And Fixing Swing Type, Single Leafed, Glass Door Shutter Having Approximate Dimensions - 900Mm X 2100Mm, Comprising The Following: The Door Shutter Shall Be Made With 10 Mm Thick Clear And Toughened Glass. The Shutter Shall Be Fixed In Position Using Stainless Steel Snap Fittings Of Approved Make With All Necessary Accessories Suitable For 10 Mm Thick Glass Panel And Provided With Stainless Steel - Floor Springs With Cover And One Set ( Pair ) Of Stainless Steel Handle 320 Mm Long ( H Type ) Etc. The Shutter Shall Be Provided With 01 Set Of Glass Door Lock ( Rectangle ) With Bolt Latch With Duplicate Keys...... For Full Details, Please Go Through The Tender Documents. 17 17 Wooden Doors At The Entrance Carefully Removing The Existing Shutters And Cutting The Bottom Of The Door To Obtain Floor Clearance After Fixing Tiles, Re-Fixing The Same After Taking Up Any Minor Repairs And Replacing Existing Damaged Aldrop With New Brass Fittings, Providing And Polishing The Door Frames, Shutters , Reapers Etc. By Scraping Off The Existing Polish And Sand Papering To Smooth Finish Using Handheld Sander, Applying 2 Coats Of Sanding Sealer And Applying Melamine Spray Polish / Pu Polish To Obtain Satin Finish Etc.. The Rate Shall Also Include Providing And Fixing Approved Design / Pattern And Make Frosted Film On One Side Of The Glass Panel Etc All As Directed By The Banks Engineer. 18 18 Flower Trough Providing And Making Flower Trough Of 300Mm Wide And 450Mm Height, Design As Per The Attached Drawing Made With 12Mm Thick Bwp Garde Marine Plywood Of Approved Make Pasted With 1 Mm Thick Laminate Of Approved Make And Shade Using Approved Quality Adhesives Fixed To The Wall / Floor Etc All Complete As Directed By The Banks Engineer. 19 19 Flower Trough With Height Of 1200Mm Providing And Making Flower Trough All Same As Item 18 Above But Having A Height Of 1200Mm 20 20 Painting Preparation Of Surface By Scraping Existing Paint On Walls, Providing And Applying 2 Coats Of Premium Quality Acrylic Interior Emulsion Paint Of Approvedmake And Shade Over A Coat Primer And One Coat Of Wall Putty And Sanding To Get Smooth Finish For Insidewalls Including Cost And Conveyance Of All Materials To Site, Charges For Loading And Unloading, Labour Charges, Hire And Labour For Scaffolding, Etc. All Complete As Directed By The Banks Engineer. 21 21 Rebate Rebate For Taking Away The Removed Salvageable Materials As Per The Item No.1 Above
