Tender For Tarring Of Road And Rcc Gutter In Front Of Waghmare Kale House In Pawar Plot Ward No 20 In Barshi.
Tender Value
9.99 Lakhs
Estimated cost
Bid Submission
07 Nov 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
barshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tarring Of Road And Rcc Gutter In Front Of Waghmare Kale House In Pawar Plot Ward No 20 In Barshi.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 mand spreading for embankment or stacking as directed. S.S.R.2021-22Item No.2.11 R.A.No.1 |
| 2 | conveying materiaal 2km S.S.R.2021-22Item No.21.02 R.A.No.2 |
| 3 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources). S.S.R.2021-22Item No.2.28 R.A.No.3 |
| 4 | Construction of granular sub-base byPlant Mix Method by providing close graded Material,mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site,spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.For Grading I Material. S.S.R.2021-22Item No.3.01 R.A.No.4 |
| 5 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-I(Using Screening Type B (11.2 mm) Aggregate) S.S.R.2021-22Item No.3.19 R.A.No.5 |
| 6 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate) S.S.R.2021-22Item No.3.20 R.A.No.6 |
| 7 | Providing and constructing 75 mm. thick ModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant, heating and spraying thebitumen of VG-30 grade @ 2 Kg/sqm, spreading 12 mm. size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including picking of existing WBM surface.S.S.R.2021-22Item No.3.35b R.A.No.7 |
| 8 | Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumenset footed in bitumen boiler on B.T. surface at 2.50 Kg per 10 Square Metre using VG-30 grade bulk bitumen. S.S.R.2021-22Item No.3.30 R.A.No.8 |
| 9 | Providing and Laying Open Graded premix surfacing20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction, but excluding prime / tackand seal coat, usingVG-30 bulk bitumen, Drum Mix type hot mix plant with SCADA, Paver and Vibratoryroller over Black Topped surface. S.S.R.2021-22Item No. R.A.No.9 |
| 10 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 gradepreparing existing road surface, heating and applying bitumen at the rate 0.98 Kg./Sqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. S.S.R.2021-22Item No.4.01 R.A.No.10 |
| 11 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 m.) by Mechanical Means.S.S.R.2021-22Item No.21.02 R.A.No.11 |
| 12 | conveying materiaal 2km S.S.R.2021-22Item No.21.02 R.A.No.12 |
| 13 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). S.S.R.2021-22Item No.24.01 R.A.No.13 |
| 14 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).S.S.R.2021-22Item No.24.10 R.A.No.14 |
| 15 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). S.S.R.2021-22Item No.26.17 R.A.No.15 |
| 16 | Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).S.S.R.2021-22Item No.25.70 R.A.No.16 |
| 17 | Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. S.S.R.2021-22Item No.26.33 R.A.No.17 |
| 18 | basic test of CEMENT standard consistancy, fineness specific gravity setting time (initial&final)compressive strength |
| 19 | BASIC TEST OF AGGREGATEWater absorption, Specific gravity , impact valuecrushing value |
| 20 | seieve analysis binding materialmurum |
| 21 | seieve analysis binding materialmurum |
| 22 | penetration softening point flash &fire point spe gravity bitumen mpm |
| 23 | viscosity bitumen mpm |
| 24 | extraction testogc |
| 25 | concretecompressive strengthof cement concrete cubes( set of 3 cubes) test Upto 16 mm (Set of 3 Bars) STEEL |
| 26 | Upto 16 mm (Set of 3 Bars) STEEL |
AI Tender Summary
Tender Timeline
Oct 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender