Tender For Repair Maintenance And Testing Of Unserviceable Earthing With Connected Items Of Em Installation At Af Stn Pune And Earthings, Lightening Protection System And Misc Items At 9Brd Air Force Station Pune
Tender Value
29 Lakhs
Estimated cost
Bid Submission
16 Nov 2022
0 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maintenance And Testing Of Unserviceable Earthing With Connected Items Of Em Installation At Af Stn Pune And Earthings, Lightening Protection System And Misc Items At 9Brd Air Force Station Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | M & Lfor Checking/ Testing of resistance value of any type of earth pits by disconnecting earth continuity conductor from test terminal block and reconnecting the earth continuity conductor after testing complete all as specified and directed.Note: (i) Temporary earthing connection to be provided while testing.(ii) Earth tester will be provided by MES/ User Section .(iii) Contractor has to prepare sketch of earthings indicating the locations in surrounding E&M installations andand give earthing No.(iv) Earth test results shall be recorded in reference to sketch.(v) If earth test result is not satisfactory , earthing test will be carried out again after maintenance and this will be paid separately.(vi) Earth test to be signed by Rep of contractor, Rep ofuser section andrep of MES , Test reports to be submitted in triplicate. |
| 2 | M&L for maintenance of GI Plate/copperplateearthing to improve the earth resistance as following:-(a) Remove the earth pit carefully and kept at site for reuse. If existing pit is already damaged then new pit will be provided, measured & paid separately.(b) Excavation in any type of soil and rock 0.5 cum (approx 0.75m x 0.75m x 0.9m depth )(c) On First day recharge the earth pit with common salt, Magnisium sulphate,back fill compoundmixed with water.(Approx salt- 10 kg, Mg sulphate- 10 kg,Charkol - 10 kg )(d) On the next day recharge the earth pit with water 500 ltrs on next day.(e) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled.(f) Refill the pit with M&L for black cotton soil 0.5cum.(g) Refit the earth pit in place.(h) Testing of earth ( to be measured and paid separately)Note:-(i) Common salt, Mg sulphate, Charkol will be measured and paid separately. |
| 3 | M&L for maintenance ofGI plate earthing to improve the earth resistance as following:-(a) Remove the earth chamber carefully and kept at site for reuse. If existing chamber is already damaged then new chamber will be provided, new chamber will be measured & paid separately.(b) Excavation in any type of soil and rock 1 Cum(approx 0.75m x 0.75m x 2 m depth )(c)Taking outGI Earth plate , watering pipe , funnel , earth continuty GI strip, cleaning of GI earth plate and GI stripwith wire brush and polish paper , cleaning of GI pipe and funnel and renistall the the same(d) GIstrip shall be fitted with GI plate byGI nutbolts - 3 nos and in addition weldingto be caried out , weld length between GI plate and GI strip not less than 30 CMon both side of strip (e) On First day recharge the earth pit withcharcoal ,common salt, back fill compoundmixed with water and black cotton soil (Approxcharcoal- 25 KG, salt- 25 kg,Magnisium sulphate - 25 kg, black cotton soil 0.5 Cum(f) On the next day recharge the earth pit with water 500 ltrs on next day.(g) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled (h) Refill the pit with M&L for black cotton soil 0.5cum.(j) Refit the earth chamber in place.(k) Testing of earth ( to be measured and paid separately)Note:- charcoal , Common salt,Magnasium salphate willbe measured and paid separately.. |
| 4 | M&L for maintenance of copper plate earthing to improve the earth resistance as following:-(a) Remove the earth chamber carefully and kept at site for reuse. If existing chamber is already damaged then new chmber will be provided,new chamber will bemeasured & paid separately.(b) Excavation in any type of soil and rock 1 Cum(approx 0.75m x 0.75m x 2 m depth )(c)Taking outCopper Earth plate , watering pipe , funnel , earth continuty copper strip, cleaning of copper earth plate and Copper stripwith wire brush and polish paper, cleaning of GI pipe and funnel and renistall the the same(d) copperstrip shall be fitted with copper plate bybrassnutbolts - 3 nos and in addition brazing to be caried out , brazing length between copperplate and copper strip not less than 30 CMon both side of strip (e) On First day recharge the earth pit withcharcoal ,common salt, back fill compoundmixed with water and black cotton soil (Approxcharcoal- 25 KG, salt- 25 kg, Magnasium sulphate - 25 kg, black cotton soil 0.5 Cum(f) On the next day recharge the earth pit with water 500 ltrs on next day.(g) Excavated material to be removed from the site and deposited at the distance not exceeding 50m distance and levelled .(h) Refill the pit with M&L for black cotton soil 0.5cum.(j) Refit the earth chamber in place.(k) Testing of earth ( to be measured and paid separately)Note:- charcoal , Common salt, Magnesium sulphate will be measured and paid separately. |
| 5 | M&L for fixing earth indicators made out of 3 mm thick MS sheet of size 200 mm x 300 mm duly fixed in MS angle iron 25 mm x 25mm of 600 mm long fixed to ground by means and including necessary cement concrete foundation and painting with one coat of synthetic enamel paint over a coat of red oxide primer complete for writing earth reading and connected plant/ panel etc. and excavation and earth work complete all as specified and directed. |
| 6 | S&F in repair of test point made out of gun metal or phosphorous bronze of size 75x50x5mm duly mounted on epoxy insulator 02 Nos.Drilling of upper & lower portion of test point for incoming & outgoing connections with brass nut bolt to be fitted in and including terminal blockmade out of M.S sheet 2mm thick as per the sample duly painted with two coat of enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | Material and labour for supply, installation, testing and commissioning of copper pipe electrode earthing maintenance freeearthing based on 6 mtr long copper pipe 76 mm dia(ID) with wall thickness of 2 mm, copper strip in pipe and filled with MFC for improvement of conductivity of electrodeduly fixed with connector at top connection of copper strip 32X6 mm riveted /nut bolt after 12 mm boring and further earth continuity conductor made of copper strip 32x6 mm upto 7.5 meter ,120 KGS BFCshall befilled around the copper pipe elecrode ,including providing earth pit chamber size 450x450x300 mm depth outside & 250x250x300 mm depth of PCC (1:3:6) type C1 complete all as specified and directed by Engr-in-Charge.Note:- (i) Rate included for testing,commisioning including checking of earth continuity and earth result complete all as specified and directed.(ii) Vendors are bound to get earthing result less than1 Ohm with grid of three earthings and 2 Ohm with grid of two earthing, 3ohm with single earthing, Any additional work and material required to achive the required result is included in the cost(iii) Earth strip beyond 7.5m shall be measured and paid separately.(iv) Rate is included for boring of earthing in any type of soil/rock,minimum dia of bore 150mm.(v) Continuity of good earth resistance shall maintained upto 1 year and testing will be carried out monthly by MES authority. |
| 8 | Material and labour for supply, installation, testing and commissioning of GI pipe electrode earthing maintenance freeearthing based on 6 mtr long GI pipe 76 mm dia(ID) medium grade, GI strip in pipe and filled with MFC for improvement of conductivity of electrodeduly fixed with connector at top connection of GI strip 32X6 mm riveted /nut bolt after 12 mm boring and further earth continuity conductor made of GI strip 32x6 mm upto 7.5 meter , 60 KGS BFC shall be filled around the GI pipe electrode including providing earth pit chamber size 450x450x300 mm depth outside & 250x250x300 mm depth of PCC (1:3:6) type C1 complete all as specified and directed.Note:- (i) Rate included for testing,commisioning including checking of earth continuity and earth result complete all as specified and directed.(i) Venders are bound to get earthing result upto 5 Ohm for single earthings and 3 Ohm with the grid of two earthing.Any additional work and material required to achive the required result is included in the cost quoted by the tenderer.(iii) Earth strip beyond 7.5m shall be measured and paid separately.(iv) Rate is included for boring of earthing in any type of soil/rock,minimum dia of bore 150mm.(v) Continuity of good earth resistance shall maintained upto 1 year and testing will be carried out monthly by MES authority. |
| 9 | M/L for providing earthing complete with Copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to copper earth strip 20 x 3 mmby means of bolts, nuts, checknuts & washers of copper and connecting to test point, providing charcoal and common salt ,all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs,including copper earth strip 20 x 3 mmwith GI protection pipe of 25 mm medium grade 7.5 meter long, etc complete all as specified and directed.Note-- (i) Vendors are bound to get earthing result upto1 Ohm with grid of three earthings and 2 Ohm with grid of two earthing, 3ohm with single earthing, Any additional work and material required to achive the required result is included in the cost. (ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled.(iii) Refill the pit with M&L for black cotton soil 1 cum. |
| 10 | M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plateNo. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 32x6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and directed.Note:-(i) Venders are bound to get earthing result upto 5 Ohm for single earthings and 3 Ohm with the grid of two earthing.Any additional work and material required to achive the required result is included in the cost quoted by the tenderer.(ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled.(iii) Refill the pit with M&L for black cotton soil 1 cum. |
| 11 | S & F GI earth continuity conductor or main earthing lead of size 32x6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as specified and directed. |
| 12 | S & F GI earth continuity conductor or main earthing lead of size 25x4 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. complete all as specified and directed. |
| 13 | S & F copper earth continuity conductor or main earthing lead of size 25x3 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. complete all as specified and directed. |
| 14 | S & F copper earth continuity conductor or main earthing lead of size 20x3 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. complete all as specified and directed. |
| 15 | S & F GI wire 4mm dia fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. complete all as specified and directed. |
| 16 | S&F in repair of PVC insulated single core unsheathed multistranded cable FR, green colour with copper conductor size 6 sqmm for voltage grade upto 1100 volts complete all as specified and directed. |
| 17 | S&F in repair of PVC insulated single core unsheathed multistranded cable FR, green colour with copper conductor size 10 sqmm for voltage grade upto 1100 volts complete all as specified and directed. |
| 18 | S&F rigid PVC conduit of 20mm size along with all accessories complete all as specified and directed. |
| 19 | S&F in repair for 25 mm bore galvanised steel water tubing \"medium grade\"complete all as specified and directed ( verticle pipein earth pitfor fiiling of water). |
| 20 | S&F GI Sheet funnelwith wire mesh complete all as specified and directed. |
| 21 | S&F in repair of GI tubing 20 mm bore \"medium grade\" including all necessaory fittings i.e. socket, elbow etc.laid on floor or fixed to wall complete all as specified and directed. |
| 22 | S&F in repair of GI tubing 15 mm bore \"medium grade\" including all necessaory fittings i.e. socket, elbow etc.laid in trenches complete all as specified and directed. |
| 23 | S&F Stop valve of 15mm dia complete all as specified and directed. |
| 24 | S&F GI elbow & GI plug 15mm dia with 1 mm hole for watering to each pit complete all as specified and directed.Note - above items from Ser No 21.00 to 24.00 are for watering arrangment to earthings. |
| 25 | Excavation in trenches not exc 1.5 m wide andnot exc 1.5 m in depth and getting it out for laying of cable / pole etc complete all as specified and directed. |
| 26 | (a) Soft/loose soil |
| 27 | (b) Hard/dense soil |
| 28 | (c) Soft/ disintegrated |
| 29 | Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as specified and directed. |
| 30 | Removing the surplus soil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as specified and directed. |
| 31 | M&L for Cutting the existing GI pipe upto 80mm for tapping of 25 to 15 mm branch including required fittings complete all as specified and directed. |
| 32 | S&F epoxy insulators suitable of aluminium strip of 25x3mm size with nut bolts/ screws for fixing of copper/ aluminium / GI strips on stone / PCC block walls etc complete all as specified and directed. |
| 33 | M&L for earthing chamber of size 450x450x300 mm depth outside & 250x250x300 mm depth of PCC (1:3:6) type C1 ccomplete all as specified and directed. |
| 34 | S&F in repair of earthing pit cover 50 mm thick precast slab of RCC 1:2:4 type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm incl 6 mm dia bar handle ccomplete all as specified and directed. |
| 35 | Supply only Common saltfor earthing complete all as specified and directed. |
| 36 | Supply onlycharcoalfor earthing complete all as specified and directed. |
| 37 | Supply onlymagnasium sulphate for earthing complete all as specified and directed. |
| 38 | Taking down carefully from roof / wall of the building loose / hanging / deshaped / GI strip/ aluminium strip /copper strips of any size & type including unserviceable insulators etc complete all as specified and directed. |
| 39 | Taking down termination rod complete all as specified and directed. |
| 40 | Supply & fix aluminium strips 25x3 mm onporceline insulator \"T\" type not more than 50 cm apart complete all as specified and directed.Note: M&L Porcelain insulators with nuts bolts and screws will measured and paid separately |
| 41 | Refixing serviceable aluminium strips of any sizeand fixing on porecelin insulators \"T\" type placed not more than 50 cm apart & fixed with srews & nutbolts complete all as specified and directed.Note : M&L Porcelain insulators with nuts bolts and screws will measured and paid separately |
| 42 | Supply and fix air termination single pointed aluminium 12 mm dia & 300 mm long including nuts & bolts for fixing air termination rod to pole/ pipe duly insulated by providing appropriate insulator complete all as specified and directed. |
| 43 | Refixing air termination rodcomplete all as specified and directed. |
| 44 | Refixing of GI supporting pipe 40/50mm (for termination rod) complete all as specified and directed. |
| 45 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as mass concrete for foundation of GI tubing /Air termination rod oras required on site onElectrical installation complete all as specified and directed. |
| 46 | M&L for cement concrete (1:2:4) type B1 in foundation filling and mass concrete and coping of poles incl necessary form work using 20 mm graded stone aggregate etc complete all as specified and directed. |
| 47 | S&F porcelian insulators with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls etc complete all as specified and directed. |
| 48 | Refixing ofporcelian insulators with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls etc complete all as specified and directed. |
| 49 | S&F GI pipe medium grade 40 mm dia embeded in concrete complete all as specified and directed. (mounting arrangment for air termination) Note: M&L for PCC work will be measured and paid separately. |
| 50 | M & Ltools and machinary required for brazing of copper strip 20/25 mm wide x 3 thick both side by using copper brazing electrode to connecting the strip joints incl taking out/findingout joints below grond and required earth work complete all as specified and directed. |
| 51 | -ditto- all as above item Ser No 47.00 but above ground level complete all as specified and directed. |
| 52 | M & Ltools and machinary required for brazing of copper strip 32 mm wide x 3 mm thick by using copper brazing electrode to connecting the strip joints incl taking out/findingout joints below grond and required earth work complete all as specified and directed. |
| 53 | -ditto- all as above item Ser No 49.00 but above ground level complete all as specified and directed. |
| 54 | M & Ltools and machinary required for welding of GI Strip any sizeby using GI welding electrode to connecting the strip joints incl taking out/findingout joints below grond and required earth work complete all as specified and directed. |
| 55 | -ditto- all as above item Ser No 51.00 but above ground level complete all as specified and directed. |
| 56 | M & L for Painting and marking of Earth pit chambers and Earth test points as per direction of user section as required on site complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Nov 09, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 16, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender