Tender For Renovation Of Museum And Horbenium In Deptt. Of Botany At University Campus.
Tender Value
11.16 Lakhs
Estimated cost
Bid Submission
04 Nov 2022
0 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
2344
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Museum And Horbenium In Deptt. Of Botany At University Campus.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Floor & disposal of malwa with tractor trolley & man power including supply of all materials, labor, tools & plants etc. required for proper completion of the work. |
| 2 | S/F. 10mm. thick vitrified tile size 24x24premier quality flooring or in skirting or dado laid with pidilite chemical finished with white cement and colour jointing and polishing including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 3 | 12 mm. thick plaster with cement and approved coarse sand mortar 1:3(1-cement:3-coarse sand) finished with a floating coat of neat cement in shunk roofs inclusive of making Gola at junction of roof and wall. |
| 4 | Supply and fixing 6 mm.(1/4”) china white glazed tiles in wall or in skirting or dado laid with 1:3 cementandapproved coarse and mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 5 | Making of false ceiling with tile 2’x2’ & 4mm of E-board Co., T channel with G.I. fitting 18 gauge. The rates include the cost of all materials, fixtures screws necessary beading includig all labour and material complete with two coat of oil bound paint over false ceiling. |
| 6 | Supply & Fixing of powder coated alluminium door having 1.2 mm thick alluminium section excluding coating & an average coating of 20 micron partly 5mm thick glazed, partly 5mm thick A.C.P. sheet, made of alluminium door tube size 3.25\"x1.75\" as vertical member & 4.25\"x1.75\" size tube in bottom and horizontal members door chaukhat should be of alluminium tublar size 4\"x1.75\" vertical with one openable shutters. The rates will be include cost of material fixtures 5mm glass handles, locks, screws necessay beeding & excluding cost of floor spring if req. for proper completion of work as per direction of Engineer I/C. |
| 7 | Supply & Fixing of powder coated alluminium partitions having 1.2 mm thick alluminium section excluding coating & an average coating of 20 micron partly 5mm thick glazed partly 5mm thick A.C.P. sheet, made of alluminium vertical & horizontal member size 1.5\"x2.5\" & bottom member size 4.25\"x1.75\". Every member should not have distance more than 900mm in both direction. The rates will be include cost of material fixtures 5mm glass handles, locks, screws necessay beeding & excluding cost of floor spring if required for proper completion of work as per direction of Engineer I/C. |
| 8 | Supply & Fixing of powder coated alluminium three track sliding window having 1.2 mm thick alluminium section excluding coating & an average coating of 20 micron fully 5mm thick glazed, made of outer frame 4\"x175\" in all four direction & adjecnt three track frame 4\"x1.25\" in all four direction having two glass sliding shutter & one S.S. mosquitoes wire mesh sliding shutter named bombay interlock/ Plain/ Bottom section. Every Shutter should not be more than 450mmx1200mm in size. After width of 900mm another vetical member should be fixed. The rates will be include cost of material fixtures 5mm glass handles, locks, screws necessay beeding if required for proper completion of work as per direction of Engineer I/C. |
| 9 | Providing and fixing 35 mm. thick commercial flush door shutter with including supply and fixing of wooden cleat & stops & including fixing & adjustment of hinges, locks, handle, springs and all other fitting (but excluding their supply) all materials, labor, tools & plants etc. required for proper completion of the work. |
| 10 | Approximate cost of oxidized fittings with screws for doors as per schedule including supply of all materials |
| 11 | S/F teak vinier on flush door shutter with required adhesive, fittings, nails including supply of all materials, labor, tools & plants etc. required for proper completion of the work. |
| 12 | S/F. granite stone ¾” to 1” thick on floor/ steps/ counter/ skirting including cutting, preparation of base with 1:4 cement & badarpur etc required at site including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 13 | Making of half round granite stone double moulding including cutting, edging, polishing & using with adhesive material including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 14 | Scraping old white color wash including disposal of refuse as directed by the engineer-in-charge within a distance of 60 meter (200feet). |
| 15 | One coat cement primer old/new surface including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 16 | Providing wall putty on old surface with approvel quality material of Berger/J.K/Birla or similar make 2 coats including supply of all materials, labor, tools & plants etc. required for proper completion of the work |
| 17 | Finishing wall with two coats of oil bond distemper including sand papering, priming & smooth finish by putty including supply of all materials, labor, tools & plants etc. required for proper completion of the work. |
| 18 | Two coat wall enamel painting painting or varnishing sand papering and smooth surface by putty including supply of all materials, labor, tools & plants etc. required for proper completion of the work. |
AI Tender Summary
Tender Timeline
Oct 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender