Tender For Construction Of The Control Gate Arrangement At The Off Take Of The Bakshi Khul On The Right Side Of Flood Spill Channel, Behind Jvc Hospital
Tender Value
39.63 Lakhs
Estimated cost
Bid Submission
04 Nov 2022
0 days left
EMD
79260
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
narbal → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of The Control Gate Arrangement At The Off Take Of The Bakshi Khul On The Right Side Of Flood Spill Channel, Behind Jvc Hospital
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil: |
| 3 | Supply of Stone boulder (nallah) nominal size 225 mm (soling) |
| 4 | Dumping stone excluding cost of stones in Horizontal on level. (soling) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 600 mm dia. R.C.C. pipe. |
| 7 | Providing, Fixing, Installation and Sucessful testing and commissioning of non-rising double flanged C.I. Sluice Valve with hand wheel of Standard ISI quality to the entire satisfaction of Engineer-in-Charge at site, including cost of fixing in position and all means of Carriages upto actual site of work. Complete Job. 600mm dia. |
| 8 | Manufacturing . Fabricating, Providing and Fixing in position of M.S. Pipe fabricated out of 8mmthick M.S. Sheet (Tail Piece) ofSpecified dia. Duely welded, hot finished, as per requirement and directions of Engineer-in-charge at site. Including fixing in position, Sucessfull Testing & Commissioning, complete Job |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Supplying, Providing and Fixing of Winch rod of 4.50 meters in length of standard Manufacture and quality as per Requirement (Refer item No. 7) to the entire satisfaction of Engineer-in-Charge, including all sorts of carriage upto actual site of work, Complete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: 13.1)Foundations, footings, bases for columns |
| 14 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto / above plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 17 | Carriage of different Material from different sources to actual site of work by Mechanical Transport including loading, unloading and stacking. 16.1)Stone / Stone Soling from Avg. Lead of 18 Kms. |
| 18 | Stone Aggregate 40mm nominal size from Avg. Lead of 18 Kms |
| 19 | Stone Aggregate20mm nominal size from Avg. Lead of 18 Kms |
| 20 | Sand from Avg lead of 10 Kms. |
| 21 | Cement from Avg. lead of 5 Kms. |
| 22 | Steel from Avg. Lead of 5 Kms. |
| 23 | Excavated RCC Pipes 900mm dia.from Site of work to Divisional Store Narbal for Avg. lead of |
AI Tender Summary
Tender Timeline
Oct 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender