Tender For Maintenance And Repairing Of Existing Sbdtw Schemes At Different Locations Under Rajnagar Block Area Within The Jurisdiction Of Dws Sub-Division Barpathari During The Year 2022-23.
Tender Value
4.16 Lakhs
Estimated cost
Bid Submission
08 Nov 2022
0 days left
EMD
8327
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
belonia → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance And Repairing Of Existing Sbdtw Schemes At Different Locations Under Rajnagar Block Area Within The Jurisdiction Of Dws Sub-Division Barpathari During The Year 2022-23.
BOQ
| Sl. No. | Item Description |
| 1 | Lifting of submersible pump with delivery assembly by heavy duty chain - pully after dismantling from delivery line and staking properly as per direction of the Engineer-in-charge. |
| 2 | Labour charge for fitting fixing and lowering of Submersible pump sets with delivery assembly 900 to 00 in/c re-fitting fixing with the delivery line etc as per direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of submersible of Motor suitable for submerssible pump set by complete dismantling in/c providing & fitting fixing of PVC (IS:8783-1978) insulated electro grade copper (IS : 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necesary trial run as per specification and direction of the Engineer-in-charge. i) 2.0 HP Motor suitable for 2000 GPH capacity submersible pump set. |
| 4 | Repairing of 2000/2500 GPH capacity submersible pump set in/c dismantling and reassembling of new impeller, casing ring, bush & bearing etc. fitting fixing and satisfactorily trial run complete as per direction of the Engineer-in-Charge. |
| 5 | Providing & fitting fixing of single phase motor starter unit (with 2 phase contractor , overload relay, Volts meter & Amps meter 32 amps Main Switch (220 volts) of Havels/ BCH/L & T make in KISOSK including necessary electric wiring and G.I pipe eathing etc. complete as per direction of the Engineer-in-charge.i) For 2 phase submersible Motor |
| 6 | Providing and fitting fixing of 1500 GPH capacity submersible with 10 stage pump with suitable single phase 2 HP submerssible motor with head of 48.00 mtr DUKE make/VARUNA Make/ and other ISI mark make etc complete in all respect as per direction of the Engineer-in-charge. |
| 7 | ProvidingandfittingfixingofMouldedCaseCircuitBreaker (MCCB) of Thermal release range, 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. i) 25-32 Amps |
| 8 | Providing and fixing C.I non-return valve of approved quality as per of CPWD specification and direction of the Engineer-in-charge.i) 50 mm nominal bore |
| 9 | Providing and fitting fixing with PVC insulated 3 core flat Copper cable coforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge.i) 2.50 sqmm |
| 10 | Excavatingtrenchesofrequiredwidth forpipes,cablesetc. including exacavation for sockets, dressing of sides where required,rammingofbottoms,depthupto1500mm including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge.A) For UPVC pipes in new work a) In all kinds of soili) For pipes not exceeding 90 mm dia |
| 11 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cementconforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as perCPWD specification and direction of the Engineer - in - charge.A. Class - 3 ( working pressure 6.0 kg / cm2) |
| 12 | i) 40 mm dia. |
| 13 | ii) 50 mm dia. |
| 14 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 15 | i) 15 mm dia |
| 16 | ii) 40 mm dia. |
| 17 | iii) 50 mm dia. |
| 18 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 19 | a) 15 x 15 x 15 mm dia |
| 20 | b) 40 x 40 x 40 mm dia. |
| 21 | c) 50 x 50 x 50 mm dia. |
| 22 | Providing and fixing G.I. socketas per CPWD specification and direction of the Engineer - in - charge. |
| 23 | i) 15 mm dia |
| 24 | ii) 40 mm dia |
| 25 | iii) 50 mm dia |
| 26 | Providing and fixing G.I.union as per CPWD specification and direction of the Engineer - in - charge. |
| 27 | i) 15 mm dia |
| 28 | ii) 40 mm dia |
| 29 | iii) 50 mm dia |
| 30 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i) 50 x 40 mm dia. |
| 31 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittingsincluding trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer- in - charge.A) External work i) 15 mm dia nominal bore |
| 32 | Providing and laying of flexible PVC pipe (Conforming to IS:7634) complete as per specification and direction of the Engineer-in-charge (Cost of earth work and fittings will be paid separately). |
| 33 | i) 15 mm dia |
| 34 | ii) 20 mm dia |
| 35 | iii) 25 mm dia |
| 36 | Providing and fixing brass ferrule with C.I. cover conforming to IS :2692 including boring and tapping the main as per CPWD specification and direction of the Engineer - in - charge.i) 15 mm nominal bore |
| 37 | Providing and fixing G.I Nipple of medium class as per CPWD specification and direction of the Engineer-in-charge.i) 15 mm dia 75 mm long |
| 38 | Providing and fixing C.I Bib cock (long handle) as per CPWD specification and direction of the Engineer-in-charge.i) 15 mm dia |
AI Tender Summary
Tender Timeline
Oct 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender