Tender For Construction Of Pond In To Ice Hockey Rink /Construction Of Changing Room At Pashkum
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Oct 2022
0 days left
EMD
1.96 Lakhs
Bank guarantee accepted
Document Fee
980
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pashkum → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pond In To Ice Hockey Rink /Construction Of Changing Room At Pashkum
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by manual means over areas (exceeding 30cm and up to 1.5mtr in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth up to 1mtr cutting edge, disposed earth to be leveled and neatly dressed in: All kind of soil. |
| 2 | Ordinary rock |
| 3 | Hard Rock |
| 4 | Earth work in excavation by manual means in trenches for foundation, drains, pipes, cables etc. (not exceeding 1,5 mtr in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm onplan, depth upto 1.5mtr including disposal of excavated earth upto 50Mtr from cutting edge, disposed earthto be leveled and neatly dressed in All kinds of soil. |
| 5 | Ordinary rock |
| 6 | Hard Rock (BP) |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth lead up to 50mtr and lift up to 1.50mtr disposed earth to be leveled and neatly dressed in: All kind of soil. |
| 8 | Ordinary rock |
| 9 | Hard Rock (RB) |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 1 Osqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kind of soil. |
| 11 | Dry stone filling/pitching excluding cost of stones. |
| 12 | Dry stone pitching 22.5 em thick including supply of stones and preparing surface complete. |
| 13 | Providing and laying in position cement concrete of specifiedgrade includingthe cost ofcentering and shuttering – All work upto plinth level1:4:8 ( 1 cement: 3 coarse sand: 6 gradedstoneaggregate 40mm nominal size) |
| 14 | Providing and laying in position cement concrete of specifiedgrade includingthe cost ofcentering and shuttering – All work upto plinth level1:3:6 ( 1 cement: 3 coarse sand: 6 gradedstoneaggregate 20mm nominal size) |
| 15 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string coursed, filets, columns, pillars, piers, abutments, posts and struts, etc, up to floor five level excluding cost of centering, shuttering, finishing and reinforcement.1:2:4(1 cement:2 coarse sand:4 graded crushed stone aggregate 20mm nominal size) |
| 16 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string coursed, filets, columns, pillars, piers, abutments, posts and struts, etc, up to floor five level excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3(1 cement:1.5 coarse sand:3 graded crushed stone aggregate 20mm nominal size) |
| 17 | Providing Reinforcement for RCC work including straightening, bending, and cutting, placing in position and binding all complete .Hot rolled deformed bars. |
| 18 | Carraige of Sand/Bajreefor an average lead of08Km by Mechnical Transport including loading un loading complete. |
| 19 | Providing wood work in frames /shutter of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia complete 2nd class kail wood. |
| 20 | 15 mm thick cement plaster mix of 1:4(1cement : 4fine sand) including all carraige from source to site of work complete. |
| 21 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) including cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 finesand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size |
| 22 | Dry random rubble masonry in foundation and plinth using quarry stone with bond stone. |
| 23 | Providing and fixing wood work in frames of false ceiling, partition etc sawn and put up in position, !st class budloo wood. |
| 24 | Providing and fixing 04 mm thick glass panes for windows including ist class kail wood beadings of required size with necessary screws and nails etc. complete |
| 25 | Providing and fixing 10mm thick T&G wall panellingincluding required size with necessary screws and nails etc. complete |
| 26 | Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and incld. priming coat with cement primer. |
| 28 | Applying Priming Coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 29 | Painting with synthetic enamel p[aintof approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand manufacture |
| 30 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :•13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy,bottle green, black of any size as approved by Engineer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mmthick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rsesand) including pointing the joints with white cement andmatching pigment etc., complete. |
| 32 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \"manually contro(led device (handle lever) conforming to IS:7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required.Long pan pattern white vitreous china W.C. pan of size 580 mm. |
| 33 | Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswhereverrequired:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 34 | Providing and fixing soil, waste and vent pipes :100 mm dia.PVC |
| 35 | Providing and fixing soil, waste and vent pipes 75mm PVC. |
| 36 | Providing and fixing plain bend 100 mm of required degree:PVC. |
| 37 | Providing and fixing plain bend 75 mm of required degree:PVC |
| 38 | Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to 15:15450 U.V. stabilised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°Cincluding all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e\"g. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge:(32mm 00) pipe |
| 39 | Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to 15:15450 U.V. stabilised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°Cincluding all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e\"g. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge:(20mm 00) pipe |
| 40 | Providing and fixing of Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted Welded complete. |
| 41 | Providing and fixing percolated galvanized iron profile sheets(size, shape and pitch of corrugation as approved by Engineer -in-Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x55mm) with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 42 | Supplying and installation of height quality and self regulating heat Tracer for specialized heating solution for winterization of water pipe line including all accessories complete, including supply and installation of circuit control panel with RCBO MCB THERMOSTTATE (0-20)DEG C Power Connector two way 6sqmm W.P Splice connector W.P Tee Connector and seal mounting kit W.Pjb.J.I Pipe Strap 4 inch all adhesive tab roll 50mmx20mmml fg adhesive tape roll(DANFOSS make or CHROMALOX) any other approved brand as per direction of engineer in charge. |
| 43 | Supply and fixing of height quality 32mm thick Nitrile insulation tube for water pipe line of approved brand 2inch size wool of apparent density 128kg/cum on outer side of Nitrile tube of 50 mm thickness including aluminum dust cladding aluminum sheed gauge thickness 0.46mm to 0.71mm of approved quality and finished as per direction of engineer in charge (Nitrile tube 32mm rock wool 50mm aluminum duct cladding 0.46 mm to 0.71mm complete job. |
| 44 | Providing and fixing dual inverter hot and cold split air condition (2.0) ton with 4 way swing of approved make and manufacture (LG/HITACHI) or any other approved brand with all accessories complete job. |
| 45 | Providing and fixing electric Pump motor 2.00 HP including all fitting complete job.(CROMPTON) |
| 46 | Providing and fixingPRR pipe approved brand and qualityfor water line motor pump to tankincluding all fitting complete job.(As per direction of engineer Incharge) |
| 47 | Providing and fixing of C.P fittingd Approved Quality all necessary required complete .Ball Valve PVC. |
| 48 | Angle Valve (Steel) |
| 49 | Bib Cock |
| 50 | PVC connector. |
| 51 | Providing and installation of PUF Insulated Tank of approved brand (SYNTEX/STAR) INCLUDING Cost of Steel Stand Complete Job. |
| 52 | Providing and fixing angle iron post (50x50x6)mm and struts of required size,including bottom to be split and bend at right angle in oppositedirection for 10cm length and drilling hole upto 10mm dia etc.including nuts and bolts omplete. |
| 53 | Providing and fixing Chainlink fencing with GI (2\"x2\") Mesh including carraige complete. |
| 54 | Providing and fixing of door and windows fixture.Handle Almunium 6 inch. |
| 55 | Handle Almunium 5inch. |
| 56 | T-Bold Almunium 4 inch. |
| 57 | T-Bold Almunium 6inch. |
| 58 | Aldraps Almunium 8 inch. |
| 59 | Hings 4 inch |
| 60 | Hings 3inch |
| 61 | Door Stopper |
| 62 | Door Closer. |
| 63 | Providing and fixing Street Light of approved and luminosity complete job. |
| 64 | Providing and fixing Angle Iron sing board (4-\"0\"x3\"-0\" including priming and painting /photograph complete job. |
AI Tender Summary
Tender Timeline
Oct 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender