|
| 1 | PART A- Civil Work:- Item No.1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No.2:- Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means |
| 3 | Item No.3:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 4 | Item No.4:- Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface,... |
| 5 | Item No.5:- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Item No. 6:-Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc.in pillar of curved shapes as shown in the drawing or as directed complete.. |
| 7 | Item No.7:- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 8 | Item No.8:- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 9 | Item No. 9:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 10 | Item No.10:- Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 11 | Item No.11:- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 12 | Item No.12:- Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.. |
| 13 | Item no.13 :- Providing and mixing shrinkage compensating admixture cum plasticizer ? Sunplex 330 gms pouch of approved make & approved by Engineer in charge, adding per 50Kilogrambag of cement in sand faced cement plaster to internal/external surfaces in finished in proper line and level. Add Sunplex in dry machine mix before addition of gauging water. (Material Cost Analysis only) |
| 14 | Item No. 14:- Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade |
| 15 | Item No.15:-Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 16 | Item No.16:- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 17 | Item no.17:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running... |
| 18 | Item No.18 :- Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) |
| 19 | Item No. 19:- Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with to withstand for period of atleast 5 years of approved make. Paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to built cracks upto min 0.7mm. The paint has to be applied on High quality water based acrylic copolymer primer with good alkali resistance properties. With all leads and lifts at all levels etc. complete, as directed by Engineer in charg |
| 20 | Item No.20:- Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, with C.I. lead cover of 75Kilogramwith frame fixed in cement concrete. |
| 21 | Item No21:- Providing and Supplying 300mm class P-II R.C.C. hume pipe |
| 22 | Item No.22:- Lowering, laying and jointing 300mm class P-II R.C.C. hume pipe |
| 23 | PART B:- Electromechanical Equipmentwithout Power Generation Item No.1:-3 HP Double Cutting Arrangement, Motor ISI Mark, 3 Phase AE2, 1440 RPM, Rotary CuttersE9 Material, 10 mm output size. (Food waste capacity 100-300 kg/hr) floor area 600 mm x300 mm x600 mm height |
| 24 | Item No.2:-Segregation Table 2 m X 1.5 M MoC MS, Tray 6 mm Thickness, Frame 25 X 5 mm MS Angles with FRP coating |
| 25 | Item No.3:-Compressor- 2 HP 2 HP Double Piston Compressor (TYPE 2 stage 2 Cylinder Reciprocating Air Compressor) Motor ISI Mark, 3 Phase AE2 , 1440 RPM Tank Capacity 160 lit , Discharge Pressure (in bar) <2 bar, DRIVE- Belt |
| 26 | Item no.4:- Water Pump- Monoblock 2 HP Motor ISI Mark 1 Phase, AE2, 1440 RPM Automation Grade, Manual ; Cooling Method, Water Cooled ; Frequency (Hertz), 50 HZ ; Motor Phase, Single Phase ; Motor Horsepower, 2 -HP, Capacity 3300 - 250 lph, Head 3 - 42 m |
| 27 | Item No.5:- Slurry Pump- 2 HP Subrmecible Motor, ISI Mark , 3 Phase AE2 1440 RPM • Head Range : 4-8-10-14 meters.• Power : 2 HP, 1.50 KW.• Voltage : 220 V.• Phase : Three.• Current : 9 AMP.• Delivery Size : 10 mm. |
| 28 | Item No.6:- Gas Blower - 2 HP Twin Lobe Motor ISI Mark, 3 Phase AE2 1440 RPM Volume Flow at Inlet 30 M3/hrPressure 400 mbarConstructional Details 1 Rotor Driven by- Timing gears2 Rotor Type- Twin Lobe Type3 Shaft Seal-Double Lip TypeMaterial Viton4 Flow direction Vertical / Horizontal5 Bearing DetailsDrive Side - Roller BearingDriven Side - Ball BearingMaterial of Construction 1 Casing C.I FG 2602 Shaft is integralSpheroidal Graphite with lobes Iron – BS 2789 - 19613 Gear Housing C.I FG 260 Stress Relieved4 Gear Spur type En3535 Turned Parts En 86 Accessories M.S Fabricated |
| 29 | Item No.7:- Solar Water Heating System -200 LPD Glass Tube with Hot Water Tank Outer diameter 58 mmInner diameter 47 mmThickness of Glass Tube Outer tube thickness: 1.8 mm, inner tube thickness: 1.6 mmSelective coating type AIN/AIN-SS/CU – Sputtering, Pressure Resistance 0.6 mpa, Glass Tube Length 1800-2000mm, Center to Center Distance Between Two Glass Tubes 60-100mm, Number of Glass Tubes, Nos 08-12, |
| 30 | Item No.8:- Gas Holder (Dome) -Fabricated As per ApprovedDesign, (3 or 4 MM MS sheet with FRP coating) |
| 31 | Item No.9:- Methane Recycling Grid- 1 “GI / UPVC Line (As per Drawing) |
| 32 | Item No.10 :- Biogas Meter-Analog, 4- 6m3 /hr, Cyclic Volume 2.2 dm3, Max working Pressure 0.5 bar, Fireproof 650 Deg C |
| 33 | Item No.11:- Gas Burner /Stove- 300 mm Szie,SS Coating Body |
| 34 | Item No.12:-Electrical Control Panel- As per requirement (Fanbrication , supply, installation, testing & commissioning of 63A FP MCCB with Handle for 40 KVA Bio-gas Generator & with following :Multi Function energy meter:01 Nos,CT Tape wound type 100/5A CL-1, 5 VA: 3 Nos,R/Y/B Indicators: 01 set, Neutral Link: 01No,• Mounting stand of suitablesize• Emergencytrip• Customer load change over switch 63A: 01 No all completed as per specification required and as instruction byEIC.) |
| 35 | Item No. 13:-Weighing Balance -100 kg ISI Mark, Digital |
| 36 | Item No.14 :- Wall Mounted Fan- Size 12 \"ISI Make |
| 37 | Item No.15:-Tool Kit-Spanners, Pipe Spanner, Screw Drivers, ETC |
| 38 | Item No.16:- Installation & Commissioning- As Per Reuirment |
| 39 | Item No.17:- Initial Cow dung Seeding -As Per Reuirment |
| 40 | Part C:- Power Generation Electromechanical EquipmentItem No.1 :- Air Grid – 1” UPVC /GI Pipe line in Primary Digester (As per Dwg) |
| 41 | Item No.2:- Gas Pipe line -1” UPVC Line |
| 42 | Item No.3:- Other Related Electrical Accessories, Cabling, Switches |
| 43 | Item No.4:- Dome Installation, Loading, Unloading, Fire Extinguishers ETC |
| 44 | Item No.5:- Automization Equipmentand sensors for PH ,temprature and Level indication and Ballon |
| 45 | Add 12% GST for Civil Work |
| 46 | Add 18% for Mechanical Work |
