Tender For Estimate For The Cost Of Renovation Work At Rajeev Gandhi Complex Building In Ecodevelopment Range During 2022-2023
Tender Value
14.59 Lakhs
Estimated cost
Bid Submission
28 Oct 2022
0 days left
EMD
36500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thekkady → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For The Cost Of Renovation Work At Rajeev Gandhi Complex Building In Ecodevelopment Range During 2022-2023
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2022 | Extension of critical dates | Date | 29-Oct-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | 50.6.2.1Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1cement :6 coarse sand) etc complete |
| 2 | 13.5.115 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand) |
| 3 | 5.9.2Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) includingattached pilasters, butteresses, plinth and string courses etc. |
| 4 | 5.22.6Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 5 | 5.3Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floorfive level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement :1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 6 | od205898/2022_2023Engaging carpenter |
| 7 | 10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 8 | 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation asapproved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum toavoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | 12.51.1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) totalcoated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinccoating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on bothside of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screwscomplete:Ridges plain (500-600 mm) |
| 10 | 50.9.1.1Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framedand fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs ordash fastener shall be paid for separately), using good quality Anjili wood /jack wood |
| 11 | 50.9.3.1Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size withnecessary screws, excluding paneling which will be paid for separately, all complete as per direction 0fEngineer in- charge. using Anjili/ Jack wood |
| 12 | 50.9.5.1Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessaryscrews. Using Anjili wood/ jack wood 35 mm thick shutters. |
| 13 | 21.10Providing and fixing double glazed hermetically sealed glazing in aluminium window, ventilators andpartition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDMgasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. asper specifications, drawings and direction of Engineer-in-Charge complete |
| 14 | 21.1.1.1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodisedtransparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 15 | 12.31.1Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level,over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wiremesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces |
| 16 | 50.12.4.1Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality inaluminium frame work with necessary screws etc complete (aluminium frame work shall be paidseparately) |
| 17 | od205899/2022_2023Engaging Mason work for |
| 18 | od205900/2022_2023Engaging Coolie for |
| 19 | 11.37AProviding and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to bespecified by the manufacturer ) of approved make in allcolours, shades except burgundy, bottle green,black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mmthickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cementslurry @ 3.3kg persqm including pointing in white cement mixed with pigmentof matching shade complete. |
| 20 | 13.26Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare thesurface even and smooth complete. |
| 21 | 13.88Removing white or colour wash by scrapping and sand papering and preparingthe surface smoothincluding necessary repairs to scratches etc. complete |
| 22 | 13.83.2Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile includingapplying additional coats wherever required to achieve even shade and colour.Two coats |
| 23 | 13.99.1Painting with synthetic enamel paint of approved brand and manufacture ofrequired colour to give aneven shade :One or more coats on old work |
| 24 | 12.51.6Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) totalcoated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinccoating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on bothside of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screwscomplete:Gutter (600 mm over all girth) |
| 25 | 17.4.1Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standardflush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required:One urinal basinwith 5 litre white P.V.C. automatic flushing cistern |
| 26 | 17.6.3Providing and fixing one piece construction white vitreous china squatting plate with an integrallongitudinal flushing pipe, white PVC. automatic flushing cistern, with fittings, standard size, G.I./PVCflush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brasscoupling complete, including painting of fittings and cutting and making good the walls and floors etc.wherever required:Range of three squatting plates with 10 litre PVC. automatic flushing cistern |
| 27 | 17.7.4Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mmC.P.brasspillar taps |
| 28 | 17.29Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 29 | 50.17.1.5Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 30 | 17.32.2Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangularshape 453x357 mm |
| 31 | 17.73.2Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality and colour600 mm long towel rail with total lengthof 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms |
| 32 | 18.51.1Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms.15 mm nominal bore |
| 33 | 18.53.1Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved qualityconforming to IS: 893115 mm nominal bore |
| 34 | 26.40Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh orother suitable size wire meshto be fixed & firmly anchored to the concretesurface by means of \"L\" shaped mild steel shear key weldedwith existingreinforcement including the cost of materials, labour, tool & plants as approvedby Engineerin-charge. |
| 35 | 26.60Water proofing treatment of RCC sunshade with Zycosil/equivalent water proofingSolution (1 litre ofZycosil/equivalent & 20 litres of water stirred first & 2 litres ofZycoprime/equivalent added and stirred(total 23 litres)) till it meets the saturationlevel and testing as per RILEM or by water drops test in whichwater drops donot absorb but drops remain or rolls |
| 36 | 17.75Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\" BSP thread and shapes,weighing not less than 60 gms. |
| 37 | 90.2.1.1Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm withspecials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, includingproviding switch board main and continuous earthing with No.14 SWG bare copper,required quantity ofcopper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular typemetal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SPswitches and making good the surface of wall, colour washing etc. complete. All the terminations in theswitch boards and DB\"s shall be tinned and the wires shall be drawn and fixed along the periphery of thebox using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Controllight point with 6A, plate ceiling rose - Short point |
| 38 | 90.2.1.6Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm withspecials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, includingproviding switch board main and continuous earthing with No.14 SWG bare copper,required quantity ofcopper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular typemetal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SPswitches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB\"s shall be tinned and the wires shall be drawn and fixed along the periphery of thebox using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combinedplug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of lightpoints |
| 39 | 90.2.2.11Supply and wiring points according to IS 732-1989 through the existing conduit with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providing switch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket,brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes,modular type front plates (white) etc. up to and including 6A modular type SP switches and making goodthe surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB\"s shallbe tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tiemounts etc as required. (Group B/ RoHS compliant modular accessories).Single control ceiling fan pointwith 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Medium point |
| 40 | 90.3.20.2Supply & installation of light fittings on TW round block Supply, conveyance installation testing andcommissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with allaccessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit thefitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wireconforming to relevant ISS and giving connections as required.2x28wT5 fitting with APF electronic ballastsuitable for continuous operation with THD less than 10%, power factor greater than 0.98, RoHScompliant, high lumen tube . standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVCinsulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extendedoriginal wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod ,canopies, shackles and blades working on 230V/240V single phase A/C |
| 41 | 90.4.5.2Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVCinsulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extendedoriginal wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod ,canopies, shackles and blades working on 230V/240V single phase A/C |
| 42 | 90.10.1.3Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recessincluding making good the damages, colour washing etc as required (RoHS compliant )3 modulemoulded plastic box on surface |
| 43 | 1.7.2Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulatedcopper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5sq.mm earth wire |
| 44 | 1.24.1Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.5/6 amps switch |
| 45 | 1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.15/16 amp switch |
| 46 | 1.24.4Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 47 | The Total value of Schedule41.24.5Supplying and fixing following modular switch/ socket on the existing modular plate & switch boxincluding connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 48 | 1.28.2Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. asrequired.3 Module |
| 49 | od205901/2022_20239 W LED Bulb |
| 50 | od205902/2022_2023LED Tube set |
| 51 | od205903/2022_2023Engaging Wire man |
| 52 | od205904/2022_2023Exhaust fan |
| 53 | od206266/2022_2023Supplying and fixing Wall Fan |
| 54 | 3 Other Necessary items and Urinal partition |
| 55 | Lumpsum for round off |
AI Tender Summary
Tender Timeline
Oct 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 31, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender