Tender For Supply Testing Installation And Commissioning Of Machineries Of Welder Trade, chandi-West Bengal

Supply Testing Installation And Commissioning Of Machineries Of Welder Trade , Arc Welding Table ( Motorized ) Suitable For 1G-5G Welding: Table Overall Dimension -1200Mm X 750Mm X 800Mm , Table Stand Will Made By 50Mm Squire Ms Hollow And Table Top Will Be Grid Type Made By 25Mm X 5Mm Ms Flat, A Slag Collection Tray Will Fit Under The Table Top , Welding Positioner For 1G To 3G Will Be Motorized Rack & Slide & Rotating Head Type Having Suitable Clamp To Hold The Job , Welding Positioner For 4G & 5G Will Be Motorized Tilt And Rotatingchuck Type , Max . Dia Of 50Mm, Round Pipe Can Be Fit To The Rotating Chuck . All Motors Will Be Dc Stepper Motor And Max. 24V Dc Power Supply Will Provide Through External Power Supply, Motorized Chuck Rpm Will Be Min.10.Table Will Be Castor Wheel Mounted For Easy Shifting. Standard Accessories-Job Holding Clamp 1 Set, Dc 24V Power Supply Adaptor-01 Nos., Spanner-01 Set. ( With Product Catalogue In Details ) [ 5 ( Five ) Years Annual Maintenance Contract ( Amc ) Beyond Normal Guarantee / Warranty Period Is Applicable For This Item. , Master Welding Booth Movable Type With Inbuilt Fume Suction, Extraction & Filtration System: Overall Dimension 1200Mml X 600Mmw X 1600Mmh, Booth Structure Will Made By 2” Ss Hollow, Booth Outside Will Cover By Acp Sheet And Inside Covered By Ss Sheet Of 18Gauges, Welding Ray Prevented Glass Window Having Measurement 200Mm X 700Mm Will Fit In Three Side Wall At A Height Of 900Mm From Ground, Booth Will Be Castor Wheel Mounted For Easy Shifting, A Grid Type Welding Table Will Fit Inside The Welding Booth, A Slag Collecting Tray Will Fit Under The Table Top, A Two Storied Compartment Will Fit Under The Slag Collection Tray, Fume Will Suction By Centrifugal Blower Fan Can Fitted Any Suitable Position Of The Welding Booth And The Fume Can Release Through A Stationary Air Filter Direct To Air, Fume Extractor System Will Run By 220V 1Ph. 50Hz Power Supply. ( With Product Catalogue In Details ) [ 5 ( Five ) Years Annual Maintenance Contract ( Amc ) Beyond Normal Guarantee / Warranty Period Is Applicable For This Item ]

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	28-Oct-2022	Resolution of pre-bid meeting	Other	07-11-2022

Refer document

INR 10000.0 /-

INR 15 Lakhs /-

Name of Work: Supply, Testing, Installation and Commissioning of Shop Outfit of WELDER trade.

Sl. No.	Item Description
1	Arc Welding Table (motorized) suitable for 1G-5G Welding: Table Overall Dimension -1200mm x 750mm x 800mm , Table stand will made by 50mm Squire MS Hollow and table top will be grid type made by 25mm x 5mm MS Flat, A slag collection tray will fit under the table top , welding positioner for 1G to 3G will be motorized rack & slide & rotating head type having suitable clamp to hold the job , welding positioner for 4G & 5G will be motorized tilt and rotatingchuck type , max . dia of 50mm,round pipe can be fit to the rotating chuck . All motors will be DC stepper motor and max. 24V DC power supply will provide through external power supply, motorized chuck RPM will be min.10.Table will be castor wheel mounted for easy shifting. Standard Accessories-Job Holding Clamp 1 set, DC 24V power supply adaptor-01 Nos., Spanner-01 set. ( with Product catalogue in details) [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee / warranty period is applicable for this item.
2	Master Welding Booth Movable Type with inbuilt fume suction, extraction & filtration system: Overall Dimension 1200mmL x 600mmW x 1600mmH, Booth structure will made by 2” SS Hollow, Booth Outside will cover by ACP Sheet and inside covered by SS Sheet of 18Gauges, welding ray prevented glass window having measurement 200mm x 700mm will fit in three side wall at a height of 900mm from ground, Booth will be castor wheel mounted for easy shifting, a grid type welding table will fit inside the welding booth, a slag collecting tray will fit under the table top, a two storied compartment will fit under the slag collection tray, Fume will suction by centrifugal blower fan can fitted any suitable position of the welding booth and the fume can release through a stationary air filter direct to air, Fume extractor system will run by 220V 1Ph. 50Hz Power supply. (with Product catalogue in details) [5 (Five) years Annual Maintenance Contract (AMC) beyond normal guarantee/warranty period is applicable for this item]