Tender For Wbphe /Ee/Amd/Nit 26E / 2022-2023/3
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Nov 2022
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
maithon → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration Of Lighting System And Other Allied Works At Maithan Boosting Station Under Rcfa-I W / S Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out the defective fixture from the top of7 mpolesand high altitude ceiling ,wall by scaffolding arrangementas per direction and stacking the damaged materials to site store. |
| 2 | supply and deliverythe following materials at site : - |
| 3 | ( a ) LED out door lighting luminaires - BRP 409 LED 115 CW SLC FG PSU GR V2 with SPD version . Make : Philips/Equivalent. |
| 4 | Fitting fixing of the street light luminaries of item No. 2 on the top of 7 mand high altitude ceiling ,wall by scaffolding arrangementas per direction. and necessary inter connection complete with supplying all necessary materials as per direction of EIC |
| 5 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] ( a ) Average run 6 mtr. |
| 6 | Supply and fitting , fixing of9 W LED Lamp .Make : Philips . |
| 7 | Earth cutting upto depth of 1.5 mtr below G.L. in any kind of morum soil including filling after completion of pipe line work and leveling, dressing, ramming all complete as per direction |
| 8 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. |
| 9 | Single brick flat soling of picked jhama bricks including ramming and dressing in proper level and filling joints with local sand complete as per direction. |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) |
| 11 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety |
| 12 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes (i) Pakur Variety |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction .a) For works in foundation and upto roof of ground floor/upto 4 m(i) Tor steel/Mild Steel |
| 14 | Brick work with 1st class bricks in cement mortar (1:6) (a) In superstructure, ground floor |
| 15 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corner & as directed and raking out joints including threding nasing and drip coures scaffolding (ground floor) ( Excluding cost of chipping over concrete surface) with 1:4cement mortar and 20 mm thick plaster. |
| 16 | Neat cement punning about 1.5mm thick in wall dado window sills floor drain etc. |
| 17 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer\"s specification and as per direction of the EIC.In Ground Floor: (a) One Coat |
| 18 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
| 19 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor) (a) One Coati) Water based interior grade Acrylic Primer |
| 20 | Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) :(Two coats)i) Standard Quality |
| 21 | Supplying fitting and fixing of 30 mm thick P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular \"L\" shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliancesi/c carriage of all materials taxes and all other incidental charges complete. |
| 22 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. ( I ) 470 mm X 280 mm X 340 mm |
| 23 | Supplying, fitting and fixing of Single Flushing Cistern ( Polypropylene , White ) . Make : Parryware /Hindware/Equivalent . |
| 24 | Supplying, fitting and fixing of Ceramic White Floor Mounted Toilet - 520 mm X 400 mm X 165 mm \" Toilet Pan . Make : Parryware /Hindware /Equivalent . |
| 25 | Construction of soak gallery (600 mm X 450 mm) with two layers of jhama metal/Brick bats (38 mm to 50 mm size) 150 mm thick and 3 layers of dry brick flats in between the layers of jhama metal leaving an opening of 100 mm X 150 mm in section along the G.L. as per sketch including cutting trenches in required grade,back filling and compacting to its original G.L. etc. complete including costs of labour and materials. (This item is suitable for moorum and sandy area and predominantly sandy soils @ 1.50 metre length per head of user.) |
| 26 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, makingthreads,fitting, fixing etc. complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting willbe made seperately) ( a ) For Exposed Work - 15 mm dia. PVC Pipes |
| 27 | Supply and fitting fixing of PVC Ball Valve . |
| 28 | Add. GST@12% |
| 29 | Add. Cess@1% |
AI Tender Summary
Tender Timeline
Oct 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender