Tender For Construction Of New Water Supply Scheme At Lahe, Taluka Shahapur, District Thane.
Tender Value
77.88 Lakhs
Estimated cost
Bid Submission
25 Oct 2022
0 days left
EMD
77889
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shahapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Water Supply Scheme At Lahe, Taluka Shahapur, District Thane.
BOQ
| Sl. No. | Item Description |
| 1 | GRAVITY MAIN Item No. 1Excavationforfoundation/pipetrenches inearth,soilofalltypes,sand,graveland soft murum including removing the excavated material with all lead and lifts, stacking and spreading as directed, normaldewatering,preparingthebedfor foundation and excluding back filling etc. complete. (Bd-A1/259) |
| 2 | Item No. 2Excavationforfoundation/pipetrenches inhardmurumincludingremovingthe excavated material with all lead and lifts, stacking and spreading as directed, normaldewatering,preparingthebedfor foundation and excluding back filling etc. complete. |
| 3 | Item No. 3Excavationforfoundation/pipetrenches insoftrockandoldcementandlime masonryfoundation, asphalt road including removing the excavated material with all lead and lifts, stacking and spreading as directed by engineer in charge,normaldewatering,preparingthe bedforfoundationandexcludingback filling etc. complete. |
| 4 | Item No. 4Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming andlevelling the bed bychisellingwherenecessaryand removing the excavated material and stackingitinmeasurableheapswithina distanceof50metresfromtheareaand liftsasbelow,normaldewatering, excluding backfilling, etc. complete. |
| 5 | Item No. 5Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cmto20cmlayersincludingwatering and compaction complete. |
| 6 | Item No. 6Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS4984/14151/12786/13488(Latestversion)withnesessaryjointingmaterial likemechanicalconnectori.e.thread/ insert joint / quick release coupler joint / compressionfitting jointorflangedjoint excludingcoupler/specials,including transportationandfreightcharges, inspectioncharges,loading/unloading charges,conveyancetothedepartmental stores&stackingthesameinclosed shadedulyprotectingfromsunrays& rains,excludingGSTleviedbyGI& GOM in all respect etc. complete.H.D.P.E. PIPE ( PE-100) |
| 7 | Item No. 7Lowering,LayingandJointingH.D.P. E./M.D.P.E.pipesinproperposition including all specials by compression fitting/electrofusionandbuttfusion jointing procedure as per relevent IS Code completewithallmaterialsforjointing procedure like Electrofusion machine, Electricheater/buttfusionwelding machine with hydraulic jack, top loading clampetc.andall laboursas directedby engineer in charge as per IS-7634 Part IIH.D.P.E. PIPE ( PE-100)90mmHDPE 8 Kg / cm2 |
| 8 | Item No. 8Refilling the trenches with available excavatedstuffwithsoftmaterialfirst over pipeline and then hard material in 15 cm. Layers with all leads and lifts includingconsolidationsurchargingetc.complete. |
| 9 | Item No. 9Providing ISI mark GI. pipe of following class and dia.including all statutory duties & taxes such as GST levied by GOI & GOM in all respect,inspection charges, transportation to stores, etc. complete as per IS-1239/2004. |
| 10 | Item No. 10Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from storestositeofworks,alllabour etc. complete either underground or in vertical position,asdirectedbyEngineer-in-charge. |
| 11 | Item No. 11Providing and supplying Air valve as per IS 14845-2000and MJP StdSpecification of approved make and qualityof following dia including all statutarydutiesandtaxessuchasGST levied by Gol and GoM in all respect , rly frieght inspection charges unloading from rlywagonloadingintotruck, transportatinuptoDeptstore/site unloading and stacking etc complete |
| 12 | Item No. 12Providing and fixing in position air valve shaftincludingprovidingandfixingGI Medium Classor6mmthickM.S.pipe shaft2.70Mlong overbranchflange of air valve tee, providing PCC blockofM- 150 concrete 150 mm thick around the air valveteeincludingencasingofvertical shaftinPCCM-150asshownintype design together with providing and makingflangedjointswhereverrequired andfixingofairvalveovertheshaft excludingcostofairvalveandbranch flanged air valve tee. etc. complete as per typedesignandasdirectedbyEngineer- in-charge for following diameters of pipe lines (type design attached.) |
| 13 | Item No. 13Providingandsupplyingdoubleflange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindlecaps includingallstatutary dutiesandtaxessuchasGSTleviedby GolandGoMinallrespect, transportation etc complete. |
| 14 | Item No. 14Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following diaincluding all statutary dutiesandtaxessuchasGSTleviedby Goland GoM in allrespect, railway freight, inspection charges unloding from railway wagon,loadingintotruck, transportationuptodepartmentalstroes/ site,unloading,stackingetc.complete. Reflux valves as per I.S.5312 Part I (1984) |
| 15 | Item No. 15Loweringlayingandjointinginposition following class and dia. C.I. Reflux valves,butterflyvalvesandsluicevalve including cost of all labour jointing material including nutbolt and giving satisfactory hydraulic testing etc.complete.a) sluice valve PN-1.6 80MM DIA |
| 16 | b ) Non ReturnvalvePN-1.6 80MM DIA |
| 17 | Item No. 16Providing&constructingB.B.Masonry valvechamberwith15cmthick1:3:6 proportionPCCbeddingexcluding excavation, BB Masonry in CM 1:5 proportion precast RCC Frame and cover etc.completeasdirectedbyengineerin charge( Note wall thickness 0.23 mtrs for depthof1.20mand0.35forbalance depthexceeding1.2m(a)Asaboveof 0.90mx0.60m internal size and depth upto1.20MwithprecastRCCframeandcover. |
| 18 | Item No. 17Providing and laying in situ Cement concreteoftrap/granite/quartzite/gneiss metalforPCCworkbelowfoundation andfootingincludingnormal dewatering,plywoodformwork, compaction,finishingandcuring, etc,complete. |
| 19 | Item No. 18Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, CibaorMahindra&Mahindramake) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking,etc.complete.Doubleflangedspecials of all diameters |
| 20 | Item No. 19ProvidingISIstandardR.C.C.pipesin standardlengthsoffollowingclassand diameter suitable for either collar joints or rubberringjoints,includingallstatutary dutiesandtaxessuchasGSTleviedby GolandGoMinallrespect,inspection charges,transporttodepartmental stores/site,unloadingandstackingetc.complete as per IS-458/1988 |
| 21 | Item No. 20Lowering,layingandjointinginproper gradeandalignmentR.C.C.pipeswith collarjointsinC.M.1:1proportionor socketed R.C.C.pipeswith rubberjoints (excluding cost ofrubberring orR.C.C. collar,) including cost of conveyance from storestositeofwork,costofjointing material, labour etc. complete as directed byEngineer-in-charge(Forallclassof pipes.) Collar Joints.as per IS 783/1985 |
| 22 | Item No. 21Hydraulic testing of H. D. P. E./ M. D. P.E.pipelinetospecifiedpressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangementforfillingsafewaterusing reciprocating type pumps which should be abletoprovidespecifiedtestpressure gaugesandothernecessaryequipments, labour,operationcharges,etc.required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. |
| 23 | Item No.22 Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.a) Pressure Relief Valve - PN - 1.6 (With by pass 80 mm Dia )MJP DSR 2021-22 I.NO.18/b/iv Page No.141 |
| 24 | Item No. 23 Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including cost of all material, labour, cost of conveyance from stores to site ofwork and giving satisfactory hydraulic testing,etc. complete. (For all class of valves.)Pressure Relief Valve - PN - 1.6 (With by pass 80 mm Dia ) |
| 25 | ESR AT MONDULPADA (Capacity 23000 Ltr, Staging Height 12M) Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder outside, Stainless Steel Ladder in container, C.I. Manhole frame and cover, water level indicator ,lightening conductor, G.I pipe railing around the top slab, B.B. masonrychamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of Acrylic emulsion with silicon additives paint to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications.Anti terminite treatment shall be given for under ground portion of the structure. |
| 26 | Item No. 2 Providing ISI mark GI. pipe of following classanddia. including all statutoryduties&taxessuchasGST levied by GOI & GOM in all respect, inspectioncharges,transportationto stores,etc.completeasperIS-1239/2004.\"INLET PIPE--100 MM DIA. |
| 27 | Providing ISI mark GI. pipe of following classanddia. including all statutoryduties&taxessuchasGST levied by GOI & GOM in all respect, inspectioncharges,transportationto stores,etc.completeasperIS-1239/2004.\"Outlet and overflowPipe=150 MM |
| 28 | Item No. 3 ProvidingandsupplyingISIstandard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar,CibaorMahindra& Mahindra make) from inside and outside including all taxes (Central and local),octroi, inspectioncharges, transportation to stores / site, and |
| 29 | Item No. 4 \"Providing and supplying double flange sluicevalvesconfirmingforIS 2906/14846includingwarngear arrangement as per test pressure stainlesssteelspindlecaps including allstatutarydutiesandtaxessuchas GSTleviedbyGolandGoMinallrespect , transportation etc complete.\"Sluce Valve 100mm Dia.(PN-1.6) |
| 30 | Sluce Valve 150mm Dia.(PN-1.6) |
| 31 | GSR AT LAHE (Capacity 50000 Ltr) Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder outside, Stainless Steel Ladder in container, C.I. Manhole frame and cover, water level indicator ,lightening conductor, G.I pipe railing around the top slab, B.B. masonrychamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of Acrylic emulsion with silicon additives paint to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications.Anti terminite treatment shall be given for under ground portion of the structure. |
| 32 | Item No. 2 Providing ISI mark GI. pipe of following classanddia. including all statutoryduties&taxessuchasGST levied by GOI & GOM in all respect, inspectioncharges,transportationto stores,etc.completeasperIS-1239/2004.\"INLET PIPE--100 MM DIA. |
| 33 | Providing ISI mark GI. pipe of following classanddia. including all statutoryduties&taxessuchasGST levied by GOI & GOM in all respect, inspectioncharges,transportationto stores,etc.completeasperIS-1239/2004.\"Outlet and overflowPipe=150 MM |
| 34 | Item No. 3 ProvidingandsupplyingISIstandard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar,CibaorMahindra& Mahindra make) from inside and outside including all taxes (Central and local),octroi, inspectioncharges, transportation to stores / site, and |
| 35 | Item No. 4 \"Providing and supplying double flange sluicevalvesconfirmingforIS 2906/14846includingwarngear arrangement as per test pressure stainlesssteelspindlecaps including allstatutarydutiesandtaxessuchas GSTleviedbyGolandGoMinallrespect , transportation etc complete.\"Sluce Valve 100mm Dia.(PN-1.6) |
| 36 | Sluce Valve 150mm Dia.(PN-1.6) |
| 37 | DISTRIBUTION SYSTEM Item No. 2Excavationforfoundation/pipetrenches inearth,soilofalltypes,sand,graveland soft murum including removing the excavated material with all lead and lifts, stacking and spreading as directed, normal dewatering,preparing the bed for foundation and excluding back filling etc. complete. |
| 38 | Item No. 3 Excavationforfoundation/pipetrenches inhardmurumincludingremovingthe excavated material with all lead and lifts, stacking and spreading as directed, normal dewatering,preparing the bed for foundation and excluding back filling etc. complete. |
| 39 | Item No. 4Excavationforfoundation/pipetrenches insoftrockandoldcementandlime masonry foundation, asphalt road including removing the excavated material with all lead and lifts, stacking and spreading as directed by engineer in charge,normaldewatering,preparingthe bedforfoundationandexcludingback filling etc. complete. |
| 40 | Item No. 5Excavation for foundation / pipe trenches in hard rock by controlled blasting, includingtrimmingandlevellingthebed bychisellingwherenecessaryand removing the excavated material and stackingitinmeasurableheapswithina distanceof50metresfromtheareaand liftsasbelow,normaldewatering,excluding backfilling, etc. complete. |
| 41 | Item No. 6Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cmto20cmlayersincludingwatering and compaction complete. |
| 42 | Item No. 7Providing and supplying in standard lengths ISI mark rigid unplasticisedHDPE pipes suitable for potable water with solventcementjointsincludingcostof couplers, as per IS specification no. 4985 / 1988includingallstatutarydutiesand taxessuchasGSTleviedbyGoland GoM in all respect, transportation, freight charges, inspection charges, loading, unloading,conveyancetothe departmental stores / site and stacking the sameinclosedshedduly protectedfrom sun rays and rains including cost of jointingmateriali.e.solventcement,etc. complete(selffittypetobejointedwithcement solvent).63 mm dia 6 kg/cm2 |
| 43 | Item No. 8Lowering, laying and jointing with HDPE pipes and specials of following class and diameterincludingcostofconveyance from stores to site of works including cost of alllabour, material, except cement solvent,rubberring, etc.complete(with cement solvent joint / ring fit joint). |
| 44 | Item No. 9Refilling the trenches with available excavatedstuffwithsoftmaterialfirst over pipeline and then hard material in 15 cm. Layers with all leads and lifts includingconsolidationsurchargingetc.complete. |
| 45 | Item No. 12Providing and supplying Air valve as per IS 14845-2000and MJP Std Specification of approved make and qualityof following dia including all statutarydutiesandtaxessuchasGST levied by Gol and GoM in all respect , rly frieght inspection charges unloading from rlywagon loading in to truck, transportatinuptoDeptstore/site unloading and stacking etc complete |
| 46 | Item No. 13Providing and fixing in position M.S. Air valveboxesfabricatedwith2mmthick M.S. plate, 30 x 30 x3 mm size M.S. angle frame,concre-tinginM-150forfixing the box in position,applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge.a) Forsingleballair valve |
| 47 | Item No. 14Providingandsupplyingdoubleflange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steelspindlecaps includingallstatutary dutiesandtaxessuchasGSTleviedby GolandGoMinallrespect, transportation etc complete.a) sluice valve PN-165 mm dia |
| 48 | b) sluice valve PN-180 mm dia |
| 49 | Item No. 15Loweringlayingandjointinginposition following class and dia. C.I. Reflux valves,butterflyvalvesandsluicevalve including cost of all labour jointing material including nutbolt and giving satisfactory hydraulic testing etc. complete.a) sluice valve PN-165 mm dia |
| 50 | b) sluice valve PN-180 mm dia |
| 51 | Item No. 16Providing&constructingB.B.Masonry valvechamberwith15cmthick1:3:6 proportionPCCbeddingexcluding excavation, BB Masonry in CM 1:5 proportion precast RCC Frame and cover etc.completeasdirectedbyengineerin charge( Note wall thickness 0.23 mtrs for depthof1.20mand0.35forbalance depthexceeding1.2m(a)Asaboveof 0.90mx0.60m internal size and depth upto1.20 M with precast RCC frame and cover. |
| 52 | Item No. 17Providing and fixing C.I. road box includingloading,unloadingandcarting tositeofworkincludingallnecessary excavation in all types of strata and fixingin murum packing, etc. complete. |
| 53 | Item No. 18Providing and laying in situ Cement concreteoftrap/granite/quartzite/gneiss metal for PCC work below foundation and footing including normal dewatering,plywood form work, compaction, finishing and curing, etc,complete. |
| 54 | Item No. 19Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, CibaorMahindra&Mahindramake) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking,etc.complete.Doubleflanged specials of all diameters |
| 55 | Item No. 20ProvidingISIstandardR.C.C.pipesin standardlengthsoffollowingclassand diameter suitable for either collar joints or rubberringjoints,includingallstatutary dutiesandtaxessuchasGSTleviedby GolandGoMinallrespect,inspection charges, transport to departmental stores/site,unloadingandstackingetc. complete as per IS-458/1988 |
| 56 | Item No. 21Lowering,layingandjointinginproper gradeandalignmentR.C.C.pipeswith collarjointsinC.M.1:1proportionor socketedR.C.C.pipeswithrubberjoints (excludingcostofrubberringorR.C.C. collar,) including cost of conveyance from storestositeofwork,costofjointing material, labour etc. complete asdirected byEngineer-in-charge(Forallclassof pipes.) Collar Joints.as per IS 783/1985 |
| 57 | Item No. 22HydraulictestingofHDPEpipelineto specifiedpressureincludingcostofall materials and labour and water for testing for specified length including cutting, placingendcapmakingarrangementfor filling safe water using reciprocating type pumpswhichshouldbeabletoprovide specifiedtestpressuregaugesandother necessaryequipments,labour,operation charges, etc. required for testing. The rate under thisitem shall also include costof retesting,ifnecessaryandreinstatingtooriginal position.63 mm dia 6 kg/cm2 |
| 58 | 90 mm dia 6 kg/cm2 |
| 59 | 110 mm dia 6 kg/cm2 |
| 60 | Item No. 24Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mm respective Dia Heavy duty Brass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer inB)Household Connection without water meter (With Integrated Saddle & compression Specials) For HDPE/PVC pipe(With Road Crossing)For 15 mm Service connection |
| 61 | TRIAL RUN Item No. 1Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnelsuchasoperator,valveman,etc.asper requirementsoftheschemeandwhoshouldalso administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, togetherwithtrainingofpersonnelsparedbyMJP/ LocalBodyandhandingovertheschemetoLocal Body after completion of the above period as directed byEngineer-in-charge.Note.:Requiredchemicals tobesuppliedbyDepartmentfreeofcostand electricity bill will also be paid by the Depertment. For Single Village Scheme 3 Months |
AI Tender Summary
Tender Timeline
Oct 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender