Tender For Provision Of Chain Link Fencing And Boundary Wall Near No Shooting Gate For Land Taken From Efr And Certain Major Revenue And Minor Work At Air Force Station Salua Under Ge (Af) Kalaikunda
Tender Value
47.40 Lakhs
Estimated cost
Bid Submission
31 Oct 2022
0 days left
EMD
94800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
salua → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Chain Link Fencing And Boundary Wall Near No Shooting Gate For Land Taken From Efr And Certain Major Revenue And Minor Work At Air Force Station Salua Under Ge ( Af ) Kalaikunda
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in hard/dense soil not exceeding 30cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 2 | Excavation in post holes (or similar holes) in hard/dense soil each n.exc 0.50 cum, getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified & as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil or any type of soil , complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed. |
| 5 | Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 6 | Dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)(unreinforced) |
| 9 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm (without taking off shutters from the frames. |
| 10 | Taking down chowkats or frames with shuttersexceeding 1.5 Sqm but not exc 4 sqm each(without taking off shutters from the frames. |
| 11 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl recking out joints hacking for key scrubbing with water etc all as sepcified. |
| 12 | Taking up or down steel tubing 15mm bore of pipe and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 13 | Taking up or down steel tubing 20mm bore of pipe and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 14 | Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 15 | Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surfaces including finishing the surface even & smooth complete all as specified and directed |
| 17 | M&L for rendering 5mm thick plaster in cement mortar 1: 3on fair faces of concrete surfaces such as soffit of slab, beam, ceiling etc including finishing the surface even & smooth complete all as specified and directed |
| 18 | M & L for non skid, rectified, colour ceramic floor tiles (group B II), 450 mm X 450 mm X 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:6) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and as directed. |
| 19 | M & L for ceramic fully vitrified tiles, coloured ceramic floor tiles (group B Ia), 600 mm X 600 mm X 10 mm in floors laid over 15 mm thick screed bed or bedding layer in cement mortar(1:6) set and jointed in neat cement slurry and pointed in epoxy mortar to match complete all as specified and directed. |
| 20 | M & L for glazed, colour ceramic wall tiles (group B III), 300 mm X 200 mm X 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in epoxy mortar to match all as specified and directed. |
| 21 | Supply and Fix, factory made rigid lam PVC door frame of size 100 mm x 50 mm, single rebated with wall thickness of extruded 5mm PVC sheet of density 600 kgs/cum , made by joining 3 Nos. heat bent PVC sheet sections. The inside section of size 90mm x 30 mm shall be made from colour PVC sheet of 5 mm thickness.The inside section shall be covered by sticking two sections of size 35mm and 6 x 45 mm made from 5mm thick plain sheet. The frame shall be mitred cut at two corners and jointed by inserting 4 Nos. 150 mm long brackets of 15mm x15 mm MS square tube. The two vertical members of door frame shall be reinforced with 40mm x 20 mm MS tubes of 19 SWG duly filled with 2nd class hardwood throughout the frame. The door frame shall be fixed to the wall using 100 mm long nikel coated dry wheet screws through the frame by using PVC fastener. Minimum 04 Nos. of screws shall be provided for each vertical member and minimum 02 Nos.for horizontal members etc. as per manufacturers specifications, fixed in opening, complete all as specified and directed. |
| 22 | Materials and Labourfor, Factory Made Solid PVC Moulded Door designer Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. |
| 23 | S & F 75 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 24 | S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed. |
| 25 | S & F cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 26 | S & F cast aluminium alloy handle, cast type, 100 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 27 | S&F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 28 | S & F exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed. |
| 29 | S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 105 mm X 60 mm, Profile C, single rebateor moreincluding hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed. |
| 30 | S & F 35 mm thick, timber species of super group and durability class I as per IS 12896: 1990 and first grade as per IS 1003 (Part-1): 2003, factory made, panelled shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board, Grade -I, Type -I (solid core, general purpose), designation (SO GP-I) conforming to IS 3097 supplied and fixed to chowkhats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 31 | S & F 600 mm X 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 32 | S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993, two ways in double control, made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 33 | S & F in repairs 15 mm nominal size, nonrising spindle type fancy concealed stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed |
| 34 | S & F in repairs 15 mm nominal size, pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut, with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish complete all as specified and as directed. |
| 35 | S&F 500 ltrsIS markedmultilayer rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position withand including 20mm Brass ballvalves high pressure with polythene float and nut with and including dismantling exsiting one complete all as specified and directed . |
| 36 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd |
| 37 | Supply and Fix, brass chromium plated,towel rail, 20mm dia, , 60cm long between flanges,complete all as specified and directed.Make Cat no.ACN-1111NM of Jaquar or equivalent of Marc/Kohler |
| 38 | Supply and Fix, brass CPfancywall mixer with L bends (including provision of O/H shower & hand shower) for mixing hot & coldwater screwed down for iron pipe 15 mm bore and fixed, with including hand shower and tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Make Hand shower cat part no. HSH-CHR-1717 and wall mixer cat part no. QQT-7281 of Jaquar or equivalent make Kohler/Marc) |
| 39 | S&F vitereous china wash down water closet pansize 660x350xx700 (singe pice suite),white (including fixing bolts,flushing cistern and flush pipe connection to drain(or outing going pipe) and to flushing pipe anti syphonage pipe etc. including taking out of existing one and making good disturbed surfaces as per existing specification complete all asspecified and directed make-parryware catalogue no-C021H(S-220) |
| 40 | S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 41 | S & F vitreous china urinals, bowl (flat back) with flushing rim of size 440 mm X 265 mm X 355 mm with side fixing arrangements with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 42 | M & L for brick work with Flybricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 43 | M & L for cement concrete in foundation, filling and mass concrete in M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 44 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 45 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchionsfor fair finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed. |
| 46 | Use and waste of form work to sides and soffits of beams, bands and the like for fair finished surfaces of concrete complete all as specified and directed. |
| 47 | Materials and Labour for reinforced cement concrete M-25design mixin foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ,complete all as specified and directed. |
| 48 | Materials and Labour for reinforced cement concrete M-25design mixin columns; pillars; piers; posts; struts etc,complete all as specified and directed. |
| 49 | Materials and Labour for reinforced cement concrete M-25design mixin beams, cantilever, bressumers, lintels over 1.5M Span,complete all as specified and directed. |
| 50 | M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge. |
| 51 | M & L for mild steel TMT bars 10 mm dia. and over,cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. |
| 52 | Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed. |
| 53 | S&F Mild steel screw bolts diameter of neck from 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified. |
| 54 | M&L Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering.oors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixingconfirming to steel of grade Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed |
| 55 | Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed. |
| 56 | S&F mild steel works inposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling ,bolting or riveting etc and similar works conforming to Fe-290 (Gde-E-165) as per IS 15911: 2010 complete all as specified and as directed. |
| 57 | Supply and fix Galvanised steel concertina coil 610mm diahaving 50 turns and approximate weight 8.50kg ± 5% and suitable to be stretched to cover a distance of 5-7 running meter, S clips per spiral using a cental core high tensile wire around which a tape of razor barbs in machine crimped complete all as specfied and directed |
| 58 | S & F galvanized steel barbed wire with two strands of line wire of dia 2.24 mm and barbed with point wire of dia 2 mm at 75 mm spacing straining and fixing to any type of standards, rails, straining bolts including securing or tying at crossings with and provision of galvanised iron binding wire, GI staples or steel pins, etc. complete all as specified and as directed (two strand of line wire will be measured as one unit). |
| 59 | S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. |
| 60 | Supply and fixinggalvanized steel chain link fence fabric of anymesh size , 4 mm nominal dia of mesh wire as approvedconforming to IS 2712-2003 and having zinc coating of type heavy as laid down in IS-4826 including line wires/ binding complete all as specified and as directed(A Board of Officers under the orders of GE shall be convened to ascertain the weight per square metre of galvanized steel wire chain link fencing brought at site by the contractor against each lot of materials). Make Tata or equivalent make as approved by GE |
| 61 | M&L 20 mm thick machine cut granite (of any type )work (polished)for wall lining (veneering to wall ) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite by specified and directed |
| 62 | Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound will be measured and paid for separately. |
| 63 | Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed. |
| 64 | M&L forpreparation of newly plastered surfaces of walls, and applying two coats acrylic distemper on wall,over and including witha coat of 2 mm thick white wall care putty premiumquality over and including a coat of primernew plastered or unplastered surfaces on wall, complete all as specified and as directed.Make;Berger(Bison)/J&N(Jensolin)/Asain Piants(Tractor) /Nerolac (Beauty) |
| 65 | Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge |
| 66 | M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 67 | Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF). |
| 68 | Supply and fixing air force emblem (as per approved sample) of size 38cm(h)X 30 cm (w)X12.5 mm (over all) made out of 14 gauge SS304 glossy matt finish, fixed on granite wallincluding neccessary approved brand materials, fixture, scalfoling, safety arrangmentand finishing complete all as specified and directed |
| 69 | Supply and fixing in repair 3D letters (as per approved sample)in uppercase arial front with regular styleof size 30cm(h)X 25 cm (w)X 25 mm (over all) made out of 14 gauge SS304 glossy matt finish, fixed on granite wallincluding neccessaryandfixingby sufficientnumberoffastenershighqualitychemicaltape/adhesive/fastpfapprovedmakeallcomplete ,scalfolding , safety arrangmentand finishing complete all as specified and directed |
| 70 | Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications with and including providing 6 mm thick plain fibre cement flat sheets type B, any category as per IS 14862: 2000 (non-asbestos) building boards, cured in HPSC (high pressure steam curing ) process, highly chemical stabilised, design and texture as approved of Make Armstrong/Everest/ Ramco, fixed to timber/GI /Aluminium framework with screw in ceilings flat or sloping complete all as specified as by the Engineer-in-Charge.as directed by Engineer-in-charge. |
| 71 | Supply and Fix, Cable Junction Box, IP66 ‘halogen free and weather proof’, size 200 mm (L) x 160 mm (B) x 98 mm (H), suitable for cable size 16/25 sq mm, all as per Cat No K 8250 of Make “Hensel” or equivalent Model of Make ‘Sintex’ ,fixed to wall/ pole with suitable FI clamp 20 X 3 mm, nuts, bolts and washers, including provision of 01 (One) No. miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 Amps and including provision of suitable cable lugs for two nos. incoming and one no. outgoing cable connections, complete all as specified and directed. |
| 72 | M&L for FRLS wiring in existing locatation for circuit alongwith earth wire 2 x 2.5 sqmm + 1 x 2.5 Sqmm copper cable PVC insulated multistranded from junction box to fitting connecting box etccomplete all as specified and as directed by Engineer-in-Charge, (Two run of 2.5 Sqmm wire+01 Run of 1.5 Sqmm wire considered as one unit) |
| 73 | Supply and fixing post top lantern LED type nominal power 40 watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, , lumen efficacy of minimum 100 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 5 KV, protection grade IP 65, CRI greater than 80%, bema angle of 1200 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 , outdoor type with decorative post top for 360 degree indirect light with IP 65 protection with impact and corrosion resistant,life span of minimum 50000 working hours as per catalogue No Make :- Crompton ( Cat No :- LPTO-40-CDL or equivalent make as catered in PS complete all as specified and directed. |
| 74 | M&L for Sub main wiringwith two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, FRLS cable drawn in but including PVC casing capping not less than 25 mm ISI marked includingall accessories ofcasing caping as approved by EIC including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete. Make of wire : L&T / Polycab/ HavellsNote : 2 x 6.0 sqmm + 1 x 4.0 Sqmm earth wirein PVC conduit of not less than 25 mm combine shall be measured as one unit length in RM |
| 75 | Supply & fixing AC Direct connected Electronic Static Single Phase Keypad Prepaid energy meter (kWH meter) with Customer Interface Unit (Home Display Unit) Single source of current range 5-60A, 240V, 50 Hz including enclosures box, Meter confirming to IS-13779and IS-15884, IEC 62055-31 with bluetooh freedom, 1107 PORT, MS Cage Clamp, IP 53, overload capacity 120% of I basic , Accuracy Class 1, with split unit, Provision for TOD (Time of day) Tariff and RTC (Real Time Clock), current rating of terminal 120% of Imax, LCD display graphical with green backlight color, kWH Led encrypted STSbased token system, capable of measuring total energy (fundamental energy + Harmonics) with temper proof Polycarbonate transparent cover (Hinge Box) including 1.50 sqmm/2.5 sqmm copper FRLSH wiring (Phase+Neutral) from meter box to Distribution board, installation of meter on laminated board, inlcuding vending charge for lifetime and warranty for 10 years in written as declared by manufacturer and complete all as specified and directed including dismatling of Old conventional meter and deposting to AGE E/M (AF) KKD (MES Store). Make - Secure Meters Ltd. Model - Liberty 150/ L&T/HPL or equivalent make as catered in PS |
AI Tender Summary
Tender Timeline
Oct 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender