Tender For Gram Sabha Audhari Math May Samudayik Shauchalay Va Submersibal Pump Ka Karya.
Tender Value
8.87 Lakhs
Estimated cost
Bid Submission
25 Oct 2022
0 days left
EMD
17744
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manihari → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Community Toilet And Submersible Pump In Gram Sabha Audhari Math.
BOQ
| Sl. No. | Item Description |
| 1 | Site clearance |
| 2 | E/W Excavation in foundation in ordinary soil(loamclay or sand includind lift upto 1.5m and leadupto 30m as per SI No. 251 |
| 3 | Sand filling in plinth includind supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work and includind watering, dressing etc.Rate to including cost of all materials, labour and T&P etc. Required for proper completion of the work. S.I. No. 255 |
| 4 | Cement concrete with 4cm. Gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials, and T&P etc. Required for proper completion of the work S.i. No.281 |
| 5 | M-150 brick in 1:6 cement and fine sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materials, labour and tools and plants,etc. Required for proper completion of the work. SI. No. 303(upto plinth beam) |
| 6 | R.C.C, work with cement approved coarse sand and 2cm. Gauge approved stone ballast in the proportion of 1:2:4 in Plinth beam of doors and windows, excluding s/o reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also includind s/o all materials required for proper completion of the work. Bindind wire to be supplied by the contractor free of cost. SI No. 283 |
| 7 | Sand filling in plinth includind supply of necessary quantity of sand from a distance not exceeding 8 km. from the site of work and includind watering, dressing etc.Rate to including cost of all materials, labour and T&P etc. Required for proper completion of the work. S.I. No. 255 |
| 8 | M-150 brick in 1:6 cement and fine sand of 1.25 fineness modulous mortar in super structure including supply of all materials, labour and tools and plants,etc. Required for proper completion of the work. SI. No. 303+309 |
| 9 | Same as item no. 5 but 0.115m thick in super structure. S.I. No. 303 + 309 +310 + 310a |
| 10 | R.C.C, work with cement approved coarse sand and 2cm. Gauge approved stone ballast in the proportion of 1:2:4 in slab of doors and windows, excluding s/o reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also includind s/o all materials required for proper completion of the work. Bindind wire to be supplied by the contractor free of cost. SI No. 284 |
| 11 | Mild Steel or iron in plain work such as in reinforced concrete or reinforced brick work (when not included in overall rates) wrought to required shape as necessary includind bending for proper completion of the work and includind supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. S.I. No. 504 |
| 12 | 12mm, thick plaster with cement mortar consisting of 1 part cement and 4 part of fine sand. Minimun thickness not to be than 10mm. Including supply of all materials, labour and T&P etc. required for proper completion of work S.I.No. 584 |
| 13 | One priming coat of cement primer and two coat oil distemper on new including supply of all materials, labour and tools and plants etc. required for proper completion of the work. S.I. No. 649+650 |
| 14 | Fabrication and supply of T-iron 40 x 40 x 5 mm door/ window chaukhat frame including cost of steel all carriage welding cutting, labour, grinding smoot finishing, staple plate 6mm. Thick welded in back flange at hinges cost of 14 gauge hinges for 100 & 75 mm and 16 gauge hinges for 50mm. Size including all Drilling, machine threading, all screws, nuts bolts, arrangement, for locking of tower bolt, tie rod. Hold fasts made of 25 X 3 mm. flat iron 15cm. Long complete job including applying of one coat of red oxide steel primer paints required for proper completion of the work as per direction of Engineer in charge.Standard weight or actual weight which ever is less shall be paid. |
| 15 | Fabrication of Z- section steel windows and ventilator |
| 16 | Supply & fixing of Flush Doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts locks, handles, springs and other fitting but excluding their supply and including paints with two coat of black japan paint on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. S.I. No. 470 |
| 17 | Supply and fixing of glass panes for window & ventilator including supply of glass 4.3 mm with putty and brads, including supply of materials, labour tools & plants etc. required for proper completion of the work. S.I. No.806 |
| 18 | Painting or varnishing new iron work in small areas or new wood with one coat (up to one sq. meter) of ready mixing primer paints and one coat of approved superior quality ready mix paint (2n quality synthetic enamel paint of approved brand such as British paints, Shalimar, Asian or equivalent as approved by E/I) or varnish including supply of all materials, labour, T&P etc. required for proper completion of the work. Paint to be used should confirm the I.S.I. No. 103-1950 S.I.No.641 |
| 19 | Supply and fixing of 10cm. Internal dia A.C. down pipes complete with rose heads bends, snd gratings and including supply of necessary M.S. clamp 25cm. X 3 mm.fixing to walls with and including supply of 15cm. Long 6mm dia, nails all materials labour and t&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipes. S.I. No. 730 |
| 20 | Anti Termite work |
| 21 | 20mm cement plaster in two coats backing coat 17 mm and finishing coat 3mm thick (of neat cement or cement and marble dust in ratio 5:1) on rough side of single or half brick wall for interrior plaster upto floor two level including arises internal rounded angles not exceeding 80mm in girth and finishing even and smooth. S.I. No.597 |
| 22 | Supply and fixing 6mm.(1/4\") China white glazed tiles in flooring or in skirting or Dado laid with 1:3 cement and approved coarse sand mortar finishef with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&p. required of proper completion of the work. S.I.No. 628 |
| 23 | 2.5 cm. (1\") thick 1:2:4 plain cement concrete floor with cement, approved coarse and 2cm. Graded approved stone ballast laid in panels finished with 3 mm (1/8:) floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3\") thick base concrete consisiting of cement local sand brick ballast 4cm. Gauge in the proporting of 1:4:8 and removing any overlapping mortar at the jointing of the panels if any and giving them a uniform finish, including supply of all materials, abour, T&P etc. required for proper completion of the work . S.I. No. 601B without base |
| 24 | Providing and wiring of light point with 1.5 sqm M Copper conductor in PVC conduit concealed in partly slab and partly wall |
| 25 | P/F of LED Bulb |
| 26 | Internal water supply & sewarage system |
| 27 | Installation Solar Pannel and submarsibal pump * Boring work etc. Complete |
| 28 | Supply and Fixing of Project board etc. |
AI Tender Summary
Tender Timeline
Oct 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender