Tender For Repair To Pump Sest, Motors, Dg Sets, Voltage Stabilizer, Misc Items, Repair And Maint To Chlorine Dozing Pump Installed At Water Supply Installations At Rakhmuti Under Ge (S) Ahnoor., Ahnoor-Jammu And Kashmir

Repair To Pump Sest, Motors, Dg Sets, Voltage Stabilizer, Misc Items, Repair And Maint To Chlorine Dozing Pump Installed At Water Supply Installations At Rakhmuti Under Ge ( S ) Ahnoor.-1.00 Dismantling Or Taking Up Defective / Damaged Submersible Pump Sets With Lowering Pipe, Flange Or Any Type And Any Size Of Any Depth With Pump Set Of Any Capacities By Manual Or Mechanical Means After Disconnecting The All Electric Connections From Lt Panel Or Starter And Transport To Workshop For Repair And Workshop To Sites After Repairing, Complete All As Specified And Directed By Engineer-In-Charge. Note: ( I ) Cost Of Tools And Plants For Taking Out, Minor Spare Parts Such As Nuts, Bolt, Washers, Lubricants And Transportation To Workshop And Workshop To Site Of Work Shall Be Deemed Included In Quoted Rate. 2.00 De-Assemble Submersible Pumps Of Capacities 20 Hp To 40 Hp, Discharge 20000 To 30000 Gallons Per Hours And 90 Mtrs Head Height, For Repair And Re-Assembling The Same After Necessary Repair / Replacement Of Old Defective / Damaged Spare Parts Of Existing Makes And Specifications, Complete All As Specified And Directed By Engineer-In-Charge. Note: ( I ) Cost Of New Spare Parts Will Be Measured And Paid Separately Under Respective Items. ( Ii ) Cost Of Tools And Plants, Transportation To Workshop Shall Be Deemed Included In Quoted Rate. 3.00 Supply Only Following New Spare Parts Required For Replacement For Repairsubmersible Pumps Of Capacities 20 Hp To 40 Hp, Discharge 20000 To 30000 Gallons Per Hours And 120 Mtrs Head Height :- 4.00 ( A ) Gun Metal Impellers 5.00 ( B ) Gun Metal Bushes 6.00 ( C ) Neck Ring Gun Metal 7.00 ( D ) Thrust Plate Set 8.00 ( E ) Cable Seal Rubber 9.00 ( F ) Cast Iron Bowl Assembly 10.00 Repair To Pump Shaft To Its Original Shape By Remetaling, Turning, Cutting And Grinding. 11.00 Repair To Rotor Assembly To Its Original Shape By Remetaling, Turning, Cutting And Grinding. 12.00 De-Assemble Submersible Pump Of Capacity 10 Hp, For Repair And Re-Assembling The Same After Necessary Repair / Replacement Of Old Defective / Damaged Spare Parts Of Existing Makes And Specifications, Complete All As Specified And Directed By Engineer-In-Charge. Note: ( I ) Cost Of New Spare Parts Will Be Measured And Paid Separately Under Respective Items. ( Ii ) Cost Of Tools And Plants, Transportation To Workshop Shall Be Deemed Included In Quoted Rate. 13.00 Supply Only Following New Spare Parts Required For Replacement For Repairsubmersible Pump Of Capacity 10 Hp :- 14.00 ( A ) Gun Metal Impellers 15.00 ( B ) Gun Metal Bushes 16.00 ( C ) Neck Ring Gun Metal 17.00 ( D ) Thrust Plate Set 18.00 ( E ) Cable Seal Rubber 19.00 ( F ) Cast Iron Bowl Assembly 20.00 Repair To Pump Shaft To Its Original Shape By Remetaling, Turning, Cutting And Grinding. 21.00 Repair To Rotor Assembly To Its Original Shape By Remetaling, Turning, Cutting And Grinding. 22.00 Disconnecting To All Electric Connections From Lt Panel And Motor For Repair Of Motor Starter Of 40 Hp, Star-Delta Starter, Automatic Unmanned Type Suitable For Centrifugal / Submersible Pumps, Transportation To Workshop And Re-Installation The Same At Site After Necessary Repair / Replacement Of Old Defective / Damaged Spare Parts Such As Contactors, Relays, Of Existing Makes And Specifications, Complete All As Specified And Directed By Engineer-In-Charge. Note: ( I ) Cost Of New Spare Parts Will Be Measured And Paid Separately Under Respective Items. ( Ii ) Cost Of Tools And Plants, Minor Spare Parts Such As Copper Wire, Lubricants And Transportation To Workshop Shall Be Deemed Included In Quoted Rate. 23.00 Supply Only Following New Spare Parts Required For Replacement For Repair Of Motor Starter Of 10 Hp To 40 Hp Suitable For Submersible Pumps :- 24.00 ( A ) Contactor, Triple Pole, Capacities 20 Amps To 70 Amps. 25.00 ( B ) Overload Relay 26.00 ( C ) Single Phase Protection Relay. 27.00 Supply, Installation, Testing And Commissioning In Replacement Of Old Unserviceable Lt Panel With New Lt Panel For Electric Motor Protection Unmanned Type, Solid State, Three Phase, 415 Volts, 50 Hz, Alongwith Digital Select Metering, Protection Against High / Low Voltage, Single Phase Reserve And Unbalance Phasing, Over Loading, Dry Running, Having Three Nos. Of Led Indicators For Low Voltage Current, High Voltage, Reserve, Unbalancing Phasing Motor, Compacted Panel For Fully Automatic Mode Of Operations, Wall Mounted Type, Capacity Of Motor For 40 Hp, Complete All Specified And As Directed By Engineer-In-Charge. Make: Abb / L&T / Guardian / Schneider / Siemens Note: ( I ) The Installation And Fixing Of Panel Shall Be As Per Manufacturer’S Directions. ( Ii ) Quoted Rate Shall Be Inclusive To Making Good To The Disturbed Surface With Plastering And Painting As Per Existing Specifications. ( Iii ) Before Placing Purchase Order Of Lt Panel, The Drawing Of Lt Panel Shall Be Got Approved From The Ge. 28.00 Disconnecting Electric Connections From Alternator And Fuel Connection From Engine Decoupling Of Engine And Alternator For Repair, Strip Opening And De-Assembling Of Engine For Repair Including Dismantling Of Radiator, Radiator Fan, Water Pump Assembly, Air Cleaner, Fuel Filter By Opening Nuts Bolts Including Wiring Of Stare Assembly If Required, Of Dg Set Capacity 30 Kva To 125 Kva And Replacement Of Old Defective Spare Parts With New Spare Parts As Mentioned Here-In-After, Including Any Type Of Machine Work Required At Site / Workshop To Compete The Repair Including Complete Servicing The Engine All As Required At Site, Re-Assembling The Engine In Existing Position Complete And Testing On Completion All As Specified And As Directed By Engineer-In-Charge. Make Of Engine And Alternator: Sm No: Note: ( A ) New Spare Parts For Engine Will Be Measured And Paid Separately As Supply Only Under The Respective Items. ( B ) Cost Of Cleaning, Welding, Minor Repair And Special Tools And Plants Required For Dismantling Engine Will Deemed To Be Included In Quoted Rates. 29.00 Supply Only Following New Spare Parts Required For Repair Of Dg Set Capacity 30 Kva To 125 Kva :- 30.00 ( A ) Fuel Filter. 31.00 ( B ) Oil Filter. 32.00 ( C ) Air Filter. 33.00 ( D ) Coupling Rubber With Assembly. 34.00 ( E ) Fan Belt. 35.00 ( F ) Hose Pipe Set. 36.00 ( G ) Carbon Bush Of Alternator. 37.00 ( H ) Carbon Bush Holder Of Alternator. 38.00 ( J ) Slip Rings Assembly Of Alternator. 39.00 Replacement Of Old Damaged / Unserviceable Electronic Rectifier / Automatic Voltage Rectifier With New Electronic Rectifier / Automatic Voltage Rectifier Suitable For Dg Set Capacity 30 Kva To 125 Kva, Complete All As Specified And As Directed By Engineer-In-Charge. 40.00 Repair, Calibration, Checking And Pressure Testing Of Fuel Injector Pump Of Dg Set Capacity 30 Kva To 125 Kva, Including Replacement Of Damaged / Defective Parts Such As Delivery Valve, Plunger Gasket Kit, Barrel And Washers And Testing Whole Assembly After Necessary Repair And Fixing In Engine, Complete All As Specified And As Directed By Engineer-In-Charge. 41.00 De-Assembling Of Radiator Of Dg Set Capacity 30 Kva To 125 Kva, For Cleaning And Repair, Using ‘K’ Oil And Radiator Cleaning Solution Hydro-Chloric Acid By Pressure Of Pump / Caustic Soda With Wire Brush And Necessary Welding / Brazing Of Water Tubes / Fins, Whichever Is Required For Cleaning And Repairing, Complete All As Specified And As Directed By Engineer-In-Charge. 42.00 Replacement Of Old Unserviceable / Damaged Battery With New Storage Cell Lead Acid Type 12 Volts, 150 Ah Including Lead Terminals And Copper Thimble For Making Necessary Connections, Complete All As Specified And As Directed By Engineer-In-Charge. 43.00 Supply Only Copper Lead Cable 1.50Mtrs Long, Multi-Stranded, With Copper Thimble For Making Necessary Connections At Both Ends, Suitable For 12 / 24 Volts Battery Including Copper Nuts, Bolts And Washers, Complete All As Specified And As Directed By Engineer-In-Charge. 44.00 Replacement Of Old Damaged / Unserviceable Submersible Cable With New Submersible Cable, Flat, Pvc Insulated And Pvc Sheathed Copper Conductor, Multi-Stranded, 35.0 Sqmm, 3-Core, Conforming To Is: 694 / 1990 Including Making Connection To Both Ends I.E. Motor Side And Starter Side With Jointing Materials, Complete All As Specified And Directed. 45.00 Replacement Of Old Damaged / Unserviceable Submersible Cable With New Submersible Cable, Flat, Pvc Insulated And Pvc Sheathed Copper Conductor, Multi-Stranded, 25.0 Sqmm, 3-Core, Conforming To Is: 694 / 1990 Including Making Connection To Both Ends I.E. Motor Side And Starter Side With Jointing Materials, Complete All As Specified And Directed. 46.00 Replacement Of Old Damaged / Unserviceable Submersible Cable With New Submersible Cable, Flat, Pvc Insulated And Pvc Sheathed Copper Conductor, Multi-Stranded, 16.0 Sqmm, 3-Core, Conforming To Is: 694 / 1990 Including Making Connection To Both Ends I.E. Motor Side And Starter Side With Jointing Materials, Complete All As Specified And Directed. 47.00 Rewinding Of Burnt / Damaged Motor Of Submersible Pumps Of Capacities 7.5 Hp To 40 Of Any Discharge Capacity With Water Proof, Annealed Solid Copper Conductor Wire Of Existing Specifications, Insulating Materials, Isi Marked Or As Per Ie Specifications And Cleaning, Preparation Of Stator For Rewinding, Complete All As Specified And Directed By Engineer-In-Charge. 48.00 Lowering Down, Commissioning Back To Tube Well Of Submersible Pump Sets With Lowering Pipe, Flange Or Any Type And Any Size Of Any Depth With Pump Set Of Any Capacities By Manual Or Mechanical Means Including Making Necessary Electric Connections With Lt Panel Or Starter And Testing On Full Load After Repairs, Complete All As Specified And Directed By Engineer-In-Charge. Note: ( I ) Cost Of Tools And Plants For Taking Out, Minor Spare Parts Such As Nuts, Bolt, Washers, Lubricants Shall Be Deemed Included In Quoted Rate. 49.00 S&F In Replacement Of Old Unserviceable / Damaged Mccb With New Mccb, Four Pole, 415 Volts, Adjustable Thermal And Adjustable Magnetic Setting, 200 Amps With Breaking Capacity 25 Ka, Having Indicating Lamp, Ics=100% And Icu As Per Iec 60947-2, Complete All As Specified And As Directed. Make: Schneider Cat Part No- Lv525312 Or Equivalent In L&T / Legrand / Abb / Siemens. 50.00 Disconnecting Electric Connections Of Servo Voltage Stabilizers, Capacity 50 Kva, Draining Out The Transformer Oil In Clean Barrels For Re-Use, Cleaning Of Sludge From Oil Tank And Transporting To Workshop For Repairs And Return Back To Its Original Position After Repairs Including Loading And Unloading By Mechenical Means, Complete All As Specified And As Directed By Engineer-In-Charge. Note: Spares Required For Repair / Replacement Of Unserviceable Parts Shall Be Measured And Paid Separately Under Relevant Items Of Boq. 51.00 Description All As Per Serial Item No- 50 Here-In-Before But For Servo Voltage Stabilizer Of Capacity 75 Kva Capacity. 52.00 Description All As Per Serial Item No- 50 Here-In-Before But For Servo Voltage Stabilizer Of Capacity 100 Kva Capacity. 53.00 Replacement Of Old Unserviceable Printed Circuit Board ( Pcb ) With New Printed Circuit Board ( Pcb ) Of Voltage Stabilizer As Per Existing Make And Type, Capacity 50 Kva, Complete All As Specified And As Directed By Engineer-In-Charge. 54.00 Description All As Per Serial Item No- 53 Here-In-Before But For Servo Voltage Stabilizer Of Capacity 75 Kva Capacity. 55.00 Description All As Per Serial Item No- 53 Here-In-Before But Forservo Voltage Stabilizer Of Capacity 100 Kva Capacity. 56.00 Replacement Of Old Unserviceable Carbon Bushes With New Carbon Bushes Of Voltage Stabilizer As Per Existing Make And Type, Capacity 50 Kva, Complete All As Specified And As Directed By Engineer-In-Charge. 57.00 Description All As Per Serial Item No- 56 Here-In-Before But For Servo Voltage Stabilizer Of Capacity 75 Kva Capacity. 58.00 Description All As Per Serial Item No- 56 Here-In-Before But For Servo Voltage Stabilizer Of Capacity 100 Kva Capacity. 59.00 Replacement Of Old Unserviceable Servo Motor With New Servo Motor Of Voltage Stabilizer As Per Existing Make And Type, Capacity 50 Kva, Complete All As Specified And As Directed By Engineer-In-Charge. 60.00 Description All As Per Serial Item No- 59 Here-In-Before But For Voltage Stabilizer Of Capacity 75 Kva Capacity. 61.00 Description All As Per Serial Item No- 59 Here-In-Before But For Voltage Stabilizer Of Capacity 100 Kva Capacity. 62.00 Supply And Fixing Dimmer Booster Coil For Automatic Voltage Corrections, Capacity 50 Kva, Complete All As Specified And As Directed By Engineer-In-Charge. 63.00 Description All As Per Serial Item No- 62 Here-In-Before But For Voltage Stabilizer Of Capacity 75 Kva Capacity. 64.00 Description All As Per Serial Item No- 62 Here-In-Before But For Voltage Stabilizer Of Capacity 100 Kva Capacity. 65.00 Supply And Fixing Push Button Suitable For Servo Voltage Stabilizers Of Any Capacity, As Per Existing Design And Range, Fixing In Repairs, Complete All As Specified And As Directed By Engineer-In-Charge. 66.00 Supply And Fixing Digital Voltmeter, Range 0-500 Volts, Size 96Mmx96mm, Flush Type, Complete All As Specified And As Directed By Engineer-In-Charge. 67.00 Supply And Fixing Digital Ammeter, Range 0-100 Amps, Size 96Mmx96mm, Square Shape, Complete All As Specified And As Directed By Engineer-In-Charge. 68.00 Supply & Installation In Replacement Of Chlorine Dozing System With New Altoch Dosing System , Model Ads-I, Item Nr:- Ads 100 With Non-Metallic Solution Tank Of 100 Ltrs Capacity With Motor Driven Agitator To Maintan Uniform Suspension Throughout The Tank, Electrically Operated Chlorine Dosing Tank Consisting Of Dosing Tank Of 100 Ltrs Of Pe / Frp Moc With Pe / Frp Lid & Level Gauge Along With Single Phase Electric Motor And Agitator, 90 Watts, 1440 Rpm, 230 Volts, 50 Cycles, 02 Amp And Having Speed Controller To Reduce Speed Upto 800 Rpm, With Shaft & Blade In Plastic-Mounted On Tank. Lid Must Have Port Hole For Pouring Calcium Hypochlorite And Water When Necessary. Lid Must Have Provision For Mounting Dosing Pump On The Lid / Wall Incuding High Pressure Single Head Gear Motored Adjusable Dosing Pump Set, Model:- 96 Ngq51, Item Nr:- Dpp965, Uneffected On Dry Running Having No Loss Of Prime, Independent Of Back Pressure And Able To Handle Both Chemical Solutions As Well As Suspension, 230 Volts, 50 Cycles, Ac, 44 Rpm, 1 / 30 Fraction Hp Having Output 2Us Gpd To 40 U.S Gpd Complete With Accessories I.E. Lead Tubing, Connecting Nuts, Injection Check Valve, Clay Weight And Ferrules Incuding Complete Instalation, Complete All As Specified And Directed By Engr-In-Charge. Make Of Dosing System:- Altoch Dosing System, Model:- Ads-I, Item Nr:- Ads 100 , Item Type:- P & Make Of High Pressure Single Head Gear Motored Adjusable Dosing Pump:- Declibac, Model:- 96 Ngq51, Item Nr:- Dpp9651or Equivalent In Poter & Watt Corp / Briozing Unlimited. 69.00 Supply Only High-Strength Calcium Based Granular Disinfection Chemical ( 65% To 70% Chlorine ) Containing Corrosion Inhibitors & Anti-Scalants ( Cias ) To Prevent Damage / Encrustation / Scaling In Distribution Pipe Lines And Accessories For Chlorination Of Drinking Water, In Sealed Plastic Drums Of Capacity 45 Kg Each Drum, Complete All As Directed. Note :- ( I ) ( Make As Approved By E-In-Cs Branch Or By Accepting Officer In Case Approved Makes Are Not Exist By E-In-Cs Branch, A Copy Of E-In-Cs Br Latest Letter Issued For Their Approval Towards Authorised Manufacturer Of Above Cited Chemial Shall Be Putup To Ge Before Placing Purchase Order For Record Purpose And Genuineness. ) ( Ii ) Approval Of Chemical High-Strength Calcium Based Granular Disinfection Chemical ( 65% To 70% Chlorine ) Shall Be Given After Verification Of Test Certificates Of Chemical Of Various Manufactures And Other Factors Like Chemical And Safety And Health Hazard Aspects Of Usage Of Chlorination ( Iii ) The Brand / Make Of The Chlorination Of Chemical Must Be Stated Before Procurement And Certified By Govt Laboratory That It Is Free From The Technical Strength Stahbility Health Safety And Operation Point Of View This Product Is Used For Drinking Water Applications For Consumption By Humans And The Brand / Make Of Calcium Hypochlorite Is Suitable For Drinking Water Chlorination And Its Sample Has Been Tested By Govt Laboratory. ( Iv ) Oems Claim Regarding Cias Content Must Be Ratified By E-In-Cs Branch. 70.00 S&F In Replacement Of Old Unserviceable / Damaged Change Over Switch With New Change Over Switch In Sheet Metal Enclosures, On Load, Rating 200 Amps, Four Poles, 415 Volts, Ac, 50 Hz, With Center Handle, Conforms To Is:13947 ( Part-3 ) ; Iec:60947-2, With Stain Less Steel Enclouser Complete All As Specified And As Directed By Engineer-In-Charge. Make: Indo-Asian Cat Part No- Icas0200 Or Equivalent In L&T / Legrand / Abb / Siemens. 71.00 Excavation In Trenches Not Exceeding 1.5 M Wide And Not Exceeding 1.5 M Deep In Soft / Loose Soil Including Forming Sides And Bottom Surface To Required Levels / Slops / Gradients And Getting Out Complete. 72.00 Returning, Filling In Trenches Including Spreading Leveling, Watering Well, Ramming In Layers N.Exc 25 Cm In Soft / Loose Soil Complete. 73.00 Removing Excavated Material To A Distance N Exc 50 M And Depositing At A Leve N Exc 1.5 M Above Starting Point Complete. 74.00 Taking Up Unserviceable Cast Iron / Galvanised Iron / Ductile Iron Water Mains ( Including All Fittings ) Of 200Mm Bore, With Spigot And Socket / Flanged Ends And Lead Joints Including Burning Out Joints And Recovering Lead, Complete All As Specified And Directed By Engineer-In-Charge. 75.00 Taking Up Unserviceable Cast Iron / Ductile Iron Water Mains ( Including All Fittings ) Of 150Mm Bore, With Spigot And Socket / Flanged Ends And Lead Joints Including Burning Out Joints And Recovering Lead, Complete All As Specified And Directed By Engineer-In-Charge. 76.00 Supplying, Laying And Jointing, Testing, Commissioning Of In Replacement Of 200Mm Bore Dia Of K-7 Class Di ( Ductile Iron ) Pipes As Per Is 8329 Along With Cement Mortar Lining As Per Specification With Rubber Gaskets For Flexible Joints With Regular Isi Marked, Hydraulic Testing As Per Specifications To Specified Pressure In Stretches Of Length Using Pumps Which Should Be Able To Provide Specified Test Pressure, Pressure Gauges And Other Necessary Equipment, Labour, Operation Charges Etc., Required For Testing And As Per Manufacturerer Instructions Complete As Per Detailed Specifications , Complete All As Specified And Directed By Engineer-In-Charge. 77.00 Supplying, Laying And Jointing, Testing, Commissioning Of In Replacement Of 150Mm Bore Dia Of K-7 Class Di ( Ductile Iron ) Pipes As Per Is 8329 Along With Cement Mortar Lining As Per Specification With Rubber Gaskets For Flexible Joints With Regular Isi Marked, Hydraulic Testing As Per Specifications To Specified Pressure In Stretches Of Length Using Pumps Which Should Be Able To Provide Specified Test Pressure, Pressure Gauges And Other Necessary Equipment, Labour, Operation Charges Etc., Required For Testing And As Per Manufacturerer Instructions Complete As Per Detailed Specifications , Complete All As Specified And Directed By Engineer-In-Charge. 78.00 M&L Fittings For Spigot Socket Pipes Such As Bend ( Any Type Radius And Angle ) And Taper Any Type, ( Straight, Bend, Increasing, Decreasing Or Double Socket Etc ) Tee Pieces ‘Y’ Junction Double Branch ( All Socket Or Socket Caps And Plugs Etc Size Up To 200 Mm Bore 79.00 Run Lead Joint, Suitable For Cast Iron Pipes And Fittings Of 200Mm Bore Including Jointing Materials Such As Lead, Spun And Spun Yarn, Fixing In Repairs, Complete All As Specified And As Directed By Engineer-In-Charge. 80.00 Run Lead Joint, Suitable For Cast Iron Pipes And Fittings Of 150Mm Bore Including Jointing Materials Such As Lead, Spun And Spun Yarn, Fixing In Repairs, Complete All As Specified And As Directed By Engineer-In-Charge. 81.00 Replacement Old Un-Serviceable Cast Iron Sluice Valve With New Sluice Valve, Cast Iron, Class Pn 1.6, Size 200Mm Bore Pipe, Flanged Type, Conforming To Is: 14846-2000, Isi Marked With Stainless Steel Spindle, Brass Nuts And Iron Wheel Head Including Jointing Material Such As Rubber Fibre Board Packing Ring And Nuts, Bolts And Washers Of Suitable Size For Vertical Or Horizintal Fittings, Complete All As Specified And As Directed By Engineer-In-Charge. 82.00 Replacement Old Un-Serviceable Cast Iron Sluice Valve With New Sluice Valve, Cast Iron, Class Pn 1.6, Size 150Mm Bore Pipe, Flanged Type, Conforming To Is: 14846-2000, Isi Marked With Stainless Steel Spindle, Brass Nuts And Iron Wheel Head Including Jointing Material Such As Rubber Fibre Board Packing Ring And Nuts, Bolts And Washers Of Suitable Size For Vertical Or Horizintal Fittings, Complete All As Specified And As Directed By Engineer-In-Charge. 83.00 Replacement Old Un-Serviceable Cast Iron Sluice Valve With New Sluice Valve, Cast Iron, Class Pn 1.6, Size 100Mm Bore Pipe, Flanged Type, Conforming To Is: 14846-2000, Isi Marked With Stainless Steel Spindle, Brass Nuts And Iron Wheel Head Including Jointing Material Such As Rubber Fibre Board Packing Ring And Nuts, Bolts And Washers Of Suitable Size For Vertical Or Horizintal Fittings, Complete All As Specified And As Directed By Engineer-In-Charge. 84.00 Replacement Old Un-Serviceable Cast Iron Sluice Valve With New Sluice Valve, Cast Iron, Class Pn 1.6, Size 80Mm Bore Pipe, Flanged Type, Conforming To Is: 14846-2000, Isi Marked With Stainless Steel Spindle, Brass Nuts And Iron Wheel Head Including Jointing Material Such As Rubber Fibre Board Packing Ring And Nuts, Bolts And Washers Of Suitable Size For Vertical Or Horizintal Fittings, Complete All As Specified And As Directed By Engineer-In-Charge. 85.00 Taking Up Or Down Galvanised Steel Tubing Of 15Mm Bore Pipe, And Connections, Any Type, Including Jointing Materials And Cleaning For Re-Fixing Or Removal To Store, Complete All As Specified And As Directed By Engineer-In-Charge. 86.00 Taking Up Or Down Galvanised Steel Tubing Of 20Mm Bore Pipe, And Connections, Any Type, Including Jointing Materials And Cleaning For Re-Fixing Or Removal To Store, Complete All As Specified And As Directed By Engineer-In-Charge. 87.00 Taking Up Or Down Galvanised Steel Tubing Of 25Mm Bore Pipe, And Connections, Any Type, Including Jointing Materials And Cleaning For Re-Fixing Or Removal To Store, Complete All As Specified And As Directed By Engineer-In-Charge. 88.00 Taking Up Or Down Galvanised Steel Tubing Of 40Mm Bore Pipe, And Connections, Any Type, Including Jointing Materials And Cleaning For Re-Fixing Or Removal To Store, Complete All As Specified And As Directed By Engineer-In-Charge. 89.00 Taking Up Or Down Galvanised Steel Tubing Of 50Mm Bore Pipe, And Connections, Any Type, Including Jointing Materials And Cleaning For Re-Fixing Or Removal To Store, Complete All As Specified And As Directed By Engineer-In-Charge. 90.00 Laying And Fixing Only Medium Grade Galvanised, 15Mm Bore, Isi Marked Water Tubing Including All Fitting Such As Bends, Laid In Trenches Or Fixing Along The Wall, Complete All As Specified And As Directed By Engineer-In-Charge. 91.00 Laying And Fixing Only Medium Grade Galvanised, 20Mm Bore, Isi Marked Water Tubing Including All Fitting Such As Bends, Laid In Trenches Or Fixing Along The Wall, Complete All As Specified And As Directed By Engineer-In-Charge. 92.00 Laying And Fixing Only Medium Grade Galvanised, 25Mm Bore, Isi Marked Water Tubing Including All Fitting Such As Bends, Laid In Trenches Or Fixing Along The Wall, Complete All As Specified And As Directed By Engineer-In-Charge. 93.00 Laying And Fixing Only Medium Grade Galvanised, 40Mm Bore, Isi Marked Water Tubing Including All Fitting Such As Bends, Laid In Trenches Or Fixing Along The Wall, Complete All As Specified And As Directed By Engineer-In-Charge. 94.00 Laying And Fixing Only Medium Grade Galvanised, 50Mm Bore, Isi Marked Water Tubing Including All Fitting Such As Bends, Laid In Trenches Or Fixing Along The Wall, Complete All As Specified And As Directed By Engineer-In-Charge. 95.00 Tubes, Medium Grade Galvanised, 15Mm Bore, Isi Marked Including All Fitting Such As Bends, Tees, Elbows, Unions, Short Pieces, Connectors, Back Nuts, Etc, Laid In Trenches Or Fixed On Walls, Complete All As Specified And As Directed By Engineer-In-Charge. 96.00 Tubes, Medium Grade Galvanised, 20Mm Bore, Isi Marked Including All Fitting Such As Bends, Tees, Elbows, Unions, Short Pieces, Connectors, Back Nuts, Etc, Laid In Trenches Or Fixed On Walls, Complete All As Specified And As Directed By Engineer-In-Charge. 97.00 Tubes, Medium Grade Galvanised, 25Mm Bore, Isi Marked Including All Fitting Such As Bends, Tees, Elbows, Unions, Short Pieces, Connectors, Back Nuts, Etc, Laid In Trenches Or Fixed On Walls, Complete All As Specified And As Directed By Engineer-In-Charge. 98.00 Tubes, Medium Grade Galvanised, 40Mm Bore, Isi Marked Including All Fitting Such As Bends, Tees, Elbows, Unions, Short Pieces, Connectors, Back Nuts, Etc, Laid In Trenches, Complete All As Specified And As Directed By Engineer-In-Charge. 99.00 Tubes, Medium Grade Galvanised, 50Mm Bore, Isi Marked Including All Fitting Such As Bends, Tees, Elbows, Unions, Short Pieces, Connectors, Back Nuts, Etc, Laid In Trenches, Complete All As Specified And As Directed By Engineer-In-Charge. 100.00 Replacement Old Un-Serviceable Gate Valve With New Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed For 15Mm Bore Pipe Line, Complete All As Specified And As Directed By Engineer-In-Charge. 101.00 Replacement Old Un-Serviceable Gate Valve With New Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed For 20Mm Bore Pipe Line, Complete All As Specified And As Directed By Engineer-In-Charge. 102.00 Replacement Old Un-Serviceable Gate Valve With New Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed For 25Mm Bore Pipe Line, Complete All As Specified And As Directed By Engineer-In-Charge. 103.00 Replacement Old Un-Serviceable Gate Valve With New Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed For 40Mm Bore Pipe Line, Complete All As Specified And As Directed By Engineer-In-Charge. 104.00 Replacement Old Un-Serviceable Gate Valve With New Gun-Metal, Globe Or Gate Valves, With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed For 50Mm Bore Pipe Line, Complete All As Specified And As Directed By Engineer-In-Charge. 105.00 Construction Of Brick Masonry Valve Pit Of Size 1200X1200x1200mm ( Internal Dimensions Of Chamber ) Including Plain Cement Concrete, M-7.5 ( 1:4:8 ) , Type-D2 ( Using 40Mm Graded Crushed Stone Aggregates ) 100Mm Thick, As In Sub Base And Pcc M-15 ( 1:2:4 ) , Type-B2 ( Using 40Mm Graded Crushed Stone Aggregates ) 100Mm Thick, As In Flooring, Brick Work Masonry, 23Cm Thick In Cement Mortar 1:4, Rendering 15Mm Thick In Cement Mortar 1:4 On Internal And External Surfaces With Two Coat Of Lime Wash, Mild Steel Framed Work As In Valve Pit Covers With Angle Iron Frame 50X50x6mm And Including Mild Steel Sheet Cover 3.15Mm Thick Complete, Drilling / Welding For Fixing Of Steel Sheeting With Mild Steel Hinges, Handles And Suitable Locking Arrangements, Fastening Arrangements For Fixing, Nuts, Bolts And Washers Including Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Including Excavation In Any Type Of Soil, Returning Filling In External Areas And Removal The Surplus Soil To A Distance Of Not Exceeding 50Mtrs, Complete All As Specified And As Directed By Engineer-In-Charge. 106.00 Replacement Old Un-Serviceable Non Return Valve With New Non Return Sluice Valve, Class Pn 1.6, Size 200Mm Bore Pipe, Flanged Type, Including Jointing Material Such As Rubber Fibre Board Packing Rings, Nuts, Bolts And Washers Of Suitable Size, Complete All As Specified And As Directed By Engineer-In-Charge. 107.00 Replacement Old Un-Serviceable Non Return Valve With New Non Return Sluice Valve, Class Pn 1.6, Size 150Mm Bore Pipe, Flanged Type, Including Jointing Material Such As Rubber Fibre Board Packing Rings, Nuts, Bolts And Washers Of Suitable Size, Complete All As Specified And As Directed By Engineer-In-Charge. 108.00 Replacement Old Un-Serviceable Non Return Valve With New Non Return Sluice Valve, Class Pn 1.6, Size 100Mm Bore Pipe, Flanged Type, Including Jointing Material Such As Rubber Fibre Board Packing Rings, Nuts, Bolts And Washers Of Suitable Size, Complete All As Specified And As Directed By Engineer-In-Charge. 109.00 Replacement Old Un-Serviceable Mild Steel Pipe With New Mild Steel Erw Pipe, Medium Grade, 80Mm Bore, Wall Thickness Not Less Than 5.40Mm, And Including Flanged Ends Type, Isi Marked, Conforming To Is: 1239 ( Part-I ) , Laid In Trenches / Bore Well Column Pipe Including Jointing Materials, Complete All As Specified And As Directed. 110.00 Cleaning Of Overhead Water Tank, Capacity 50, 000 Gallons, Height / Staging 18.85Mtrs, By Scraping With Mild Steel Wire Brush And Removing All The Silt, Dirt, Algae, Sludge Etc From The Surfaces Of Walls And Floor Including Removal The Same To A Distance Not Less Than 50Mtrs, Washing The Cleaned Surface With Bleaching Powder Solution Thoroughly And Applying Two Coats Of Lime Wash On Internal Surfaces Of Reservoir, Also Applying Two Coats Of Cement Paint Of External Surfaces Of Tank With Staging After Preparation Of Surfaces, And Writing The Particulars Such As Capacity Of Tank, Date / Due Date Of Tank Cleaning In Bold Letters, On Table Size Not Less Than 60Cmx40cm, Painted With Black And White Synthetic Enamel Paint On External Surface, Including Painting With One Coat Black Synthetic Enamel Paint To External Surfaces Of Flow Pipes With Valves Any Type As Connected With Overhead Water Tank And Making Flow Signs With White Synthetic Enamel Paint, Complete All As Specified And Directed By Engineer-In-Charge. Note :- Necessary Scaffolding And Staging Work Alongwith Saftey Harness And Other Tools And Plants Required To Complete The Entire Job Shall Be Deemed To Be Included In The Quoted Rates Of The Item And Nothing Extra Shall Be Paid Extra On This Account. 111.00 Cleaning Of Overhead Water Tank, Capacity 1, 00, 000 Gallons, Height / Staging 18.85Mtrs, By Scraping With Mild Steel Wire Brush And Removing All The Silt, Dirt, Algae, Sludge Etc From The Surfaces Of Walls And Floor Including Removal The Same To A Distance Not Less Than 50Mtrs, Washing The Cleaned Surface With Bleaching Powder Solution Thoroughly And Applying Two Coats Of Lime Wash On Internal Surfaces Of Reservoir, Also Applying Two Coats Of Cement Paint Of External Surfaces Of Tank With Staging After Preparation Of Surfaces, And Writing The Particulars Such As Capacity Of Tank, Date / Due Date Of Tank Cleaning In Bold Letters, On Table Size Not Less Than 60Cmx40cm, Painted With Black And White Synthetic Enamel Paint On External Surface, Including Painting With One Coat Black Synthetic Enamel Paint To External Surfaces Of Flow Pipes With Valves Any Type As Connected With Overhead Water Tank And Making Flow Signs With White Synthetic Enamel Paint, Complete All As Specified And Directed By Engineer-In-Charge. Note :- Necessary Scaffolding And Staging Work Alongwith Saftey Harness And Other Tools And Plants Required To Complete The Entire Job Shall Be Deemed To Be Included In The Quoted Rates Of The Item And Nothing Extra Shall Be Paid Extra On This Account. 112.00 Cleaning Of Dug Well, Size 6.0 Mtr Dia And 7.50 Mtr Depth At Khour Pump House, By Disconnecting All Electric Connections From Lt Panel, Starter, Removing Pipe Line From Discharge Side, Taking Out Submersible / Centrifugal Pump With Motor Alongwith Column Pipe By Mechanical Or Manual Method, Scraping All Mud, Algae, Silt, Sludge And Other Dirts By Mild Steel Wire Brush Floor And Including Remval The Same To A Distance Not Less Than 50 Mtr And Re-Assembling / Lowering Down Submersible / Centrifugal Pump With Motor, Column Pipe And Making All Electric And Water Supply Connection To The Existing System, Also Applying Two Coats Of Cement Base Paint Of External Surfaces Of Tank With Staging After Preparation Of Surfaces, Including Writing The Particulars Such As Capacity Of Tank, Date, Due Date Of Tank Cleaning In Existing Letter Sizes, On Table Size Not Less Than 60X40 Cm Painted With Black And White Synthetic Enamel Paint On External Surfaces, Complete All As Directed. Note :- Necessary Scaffolding And Staging Work / Ladders / Rope / Bucket Alongwith Saftey Harness And Other Tools And Plants Required To Complete The Entire Job Shall Be Deemed To Be Included In The Quoted Rates Of The Item And Nothing Extra Shall Be Paid Extra On This Account. 113.00 Collection Of Water From Rakhmuthi Pump House No: 01, Rakhmuthi Pump House No: 02, Mandiwala Pump House, Jourian Pump House, Khour Pump House And Hamirpur Pump House To Carry Out The Following Water Tests From Indian Institute Of Integrative Medicine, Jammu Or Any Other Reputed / Recognized Institute:- 1:- Heavy Metals And Minerals Parameters Of Water: ( A ) Iron As Fe ( B ) Manganese As Mn ( C ) Zinc As Zn 2:- Physical Parameters Of Water: ( A ) Alkalinity ( B ) Calcium ( C ) Chloride ( D ) Magnesium ( E ) Oil And Greese ( F ) Ph Value ( G ) Total Suspended Solids ( H ) Total Hardness ( J ) Total Dissolved Solids ( K ) Turbidity Note : Result Sheet Of Above Tests Shall Be Submitted In Duplicate To The Entire Satsifaction Of Ge During Submission Of Work Done. 114.00 Special Note For Dg Sets And Voltage Stablizers Repairs / Pumps: The Contractor Will Submit A Scanned Copy Of Memorandum Of Under Standing From Oems ( Or Authorized Dealers ) For The Respective E / M Installations. The Details Of Oems Are As Under:- ( A ) Dg Set ( I ) Kirlosker Green / Cummins ( Ii ) Crompton Greaves ( Iii ) Sudhir ( Iv ) Mahindra ( B ) Servo Voltage Stablizer ( I ) Vinitek ( Ii ) Electric Field ( C ) Submersible And Centrifugal Pumps ( I ) Kirloskar ( Ii ) Ksb ( Iii ) Jyoti 115.00 Amount Of Schedule Of Credit Of For Rs 1, 96, 365.00 Shall Be Deducted From Quoted Amount.

INR 500 /-

INR 52000.0 /-

INR 26 Lakhs /-

Name of Work: REPAIR TO PUMP SEST, MOTORS, DG SETS,VOLTAGE STABILIZER, MISC ITEMS, REPAIR AND MAINT TO CHLORINE DOZING PUMP INSTALLED AT WATER SUPPLY INSTALLATIONS AT RAKHMUTHI UNDER GE (SOUTH) AKHNOOR.

Sl. No.	Item Description
1	Dismantling or taking up defective/ damaged submersible pump sets with lowering pipe, flange or any type and any size of any depth with pump set of any capacities by manual or mechanical means after disconnecting the all electric connections from LT panel or starter and transport to workshop for repair and workshop to sites after repairing, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants and transportation to workshop and workshop to site of work shall be deemed included in quoted rate.
2	De-assemble submersible pumps of capacities 20 HP to 40 HP, discharge 20000 to 30000 gallons per hours and 90 Mtrs head height, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
3	Supply only following new spare parts required for replacement for repairsubmersible pumps of capacities 20 HP to 40 HP, discharge 20000 to 30000 gallons per hours and 120 Mtrs head height :-
4	(a) Gun metal impellers
5	(b) Gun metal bushes
6	(c) Neck ring Gun metal
7	(d) Thrust plate set
8	(e) Cable seal rubber
9	(f) Cast iron bowl assembly
10	Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding.
11	Repair to rotor assembly to its original shape by remetaling, turning, cutting and grinding.
12	De-assemble submersible pump of capacity 10 HP, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
13	Supply only following new spare parts required for replacement for repairsubmersible pump of capacity 10 HP :-
14	(a) Gun metal impellers
15	(b) Gun metal bushes
16	(c) Neck ring Gun metal
17	(d) Thrust plate set
18	(e) Cable seal rubber
19	(f) Cast iron bowl assembly
20	Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding.
21	Repair to rotor assembly to its original shape by remetaling, turning, cutting and grinding.
22	Disconnecting to all electric connections from LT panel and motor for repair of motor starter of 40 HP, star-delta starter, automatic unmanned type suitable for centrifugal/ submersible pumps, transportation to workshop and re-installation the same at site after necessary repair/ replacement of old defective/ damaged spare parts such as contactors, relays, of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, minor spare parts such as copper wire, lubricants and transportation to workshop shall be deemed included in quoted rate.
23	Supply only following new spare parts required for replacement for repair of motor starter of 10 HP to 40 HP suitable for submersible pumps :-
24	(a) Contactor, triple pole, capacities 20 Amps to 70 Amps.
25	(b) Overload relay
26	(c) Single phase protection relay.
27	Supply, installation, testing and commissioning in replacement of old unserviceable LT panel with new LT panel for electric motor protection unmanned type, solid state, Three phase, 415 Volts, 50 Hz, alongwith digital select metering, protection against high/ low voltage, single phase reserve and unbalance phasing, over loading, dry running, having three Nos. of LED indicators for low voltage current, high voltage, reserve, unbalancing phasing motor, compacted panel for fully automatic mode of operations, wall mounted type, capacity of motor for 40 HP, complete all specified and as directed by Engineer-In-Charge. Make: ABB/ L&T/ Guardian/ Schneider/ Siemens Note: (i) The installation and fixing of panel shall be as per manufacturer’s directions. (ii) Quoted rate shall be inclusive to making good to the disturbed surface with plastering and painting as per existing specifications. (iii) Before placing purchase order of LT panel, The drawing of LT panel shall be got approved from the GE.
28	Disconnecting electric connections from alternator and fuel connection from engine decoupling of engine and alternator for repair, strip opening and de-assembling of engine for repair including dismantling of radiator, radiator fan, water pump assembly, air cleaner, fuel filter by opening nuts bolts including wiring of stare assembly if required, of DG set capacity 30 KVA to 125 KVA and replacement of old defective spare parts with new spare parts as mentioned here-in-after, including any type of machine work required at site/ workshop to compete the repair including complete servicing the engine all as required at site, re-assembling the engine in existing position complete and testing on completion all as specified and as directed by Engineer-In-Charge. Make of Engine and Alternator: SM No: Note: (a) New spare parts for engine will be measured and paid separately as supply only under the respective items. (b) Cost of cleaning, welding, minor repair and special tools and plants required for dismantling engine will deemed to be included in quoted rates.
29	Supply only following new spare parts required for repair of DG Set capacity 30 KVA to 125 KVA :-
30	(a) Fuel Filter.
31	(b) Oil Filter.
32	(c) Air Filter.
33	(d) Coupling rubber with assembly.
34	(e) Fan belt.
35	(f) Hose pipe set.
36	(g) Carbon bush of alternator.
37	(h) Carbon bush holder of alternator.
38	(j) Slip rings assembly of alternator.
39	Replacement of old damaged/ unserviceable electronic rectifier/ Automatic Voltage Rectifier with new electronic rectifier/ Automatic Voltage Rectifier suitable for DG set capacity 30 KVA to 125 KVA, complete all as specified and as directed by Engineer-In-Charge.
40	Repair, calibration, checking and pressure testing of fuel injector pump of DG set capacity 30 KVA to 125 KVA, including replacement of damaged/ defective parts such as delivery valve, plunger gasket kit, barrel and washers and testing whole assembly after necessary repair and fixing in engine, complete all as specified and as directed by Engineer-In-Charge.
41	De-assembling of radiator of DG set capacity 30 KVA to 125 KVA, for cleaning and repair, using ‘K’ oil and radiator cleaning solution hydro-chloric acid by pressure of pump/ caustic soda with wire brush and necessary welding/ brazing of water tubes/ fins, whichever is required for cleaning and repairing, complete all as specified and as directed by Engineer-In-Charge.
42	Replacement of old unserviceable/ damaged battery with new storage cell lead acid type 12 Volts, 150 AH including lead terminals and copper thimble for making necessary connections, complete all as specified and as directed by Engineer-In-Charge.
43	Supply only copper lead cable 1.50mtrs long, multi-stranded, with copper thimble for making necessary connections at both ends, suitable for 12/ 24 Volts battery including copper nuts, bolts and washers, complete all as specified and as directed by Engineer-In-Charge.
44	Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 35.0 Sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed.
45	Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 25.0 Sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed.
46	Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 16.0 Sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed.
47	Rewinding of burnt/ damaged motor of submersible pumps of capacities 7.5 HP to 40 of any discharge capacity with water proof, annealed solid copper conductor wire of existing specifications, insulating materials, ISI marked or as per IE specifications and cleaning, preparation of stator for rewinding, complete all as specified and directed by Engineer-In-Charge.
48	Lowering down, commissioning back to tube well of submersible pump sets with lowering pipe, flange or any type and any size of any depth with pump set of any capacities by manual or mechanical means including making necessary electric connections with LT panel or starter and testing on full load after repairs, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants shall be deemed included in quoted rate.
49	S&F in replacement of old unserviceable/ damaged MCCB with new MCCB, Four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 200 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed. Make: Schneider cat part No- LV525312 or equivalent in L&T/ Legrand/ ABB/ Siemens.
50	Disconnecting electric connections of servo voltage stabilizers, capacity 50 KVA,draining out the transformer oil in clean barrels for re-use, cleaning of sludge from oil tank and transporting to workshop for repairs and return back to it"s original position after repairs including loading and unloading by mechenical means, complete all as specified and as directed by Engineer-In-Charge. Note: Spares required for repair/ replacement of unserviceable parts shall be measured and paid separately under relevant items of BOQ.
51	Description all as per serial item No- 50 here-in-before but for servo voltage stabilizer of capacity 75 KVA capacity.
52	Description all as per serial item No- 50 here-in-before but for servo voltage stabilizer of capacity 100 KVA capacity.
53	Replacement of old unserviceable Printed Circuit Board (PCB) with new Printed Circuit Board (PCB) of voltage stabilizer as per existing make and type, capacity 50 KVA, complete all as specified and as directed by Engineer-In-Charge.
54	Description all as per serial item No- 53 here-in-before but for servo voltage stabilizer of capacity 75 KVA capacity.
55	Description all as per serial item No- 53 here-in-before but forservo voltage stabilizer of capacity 100 KVA capacity.
56	Replacement of old unserviceable carbon bushes with new carbon bushes of voltage stabilizer as per existing make and type, capacity 50 KVA, complete all as specified and as directed by Engineer-In-Charge.
57	Description all as per serial item No- 56 here-in-before but for servo voltage stabilizer of capacity 75 KVA capacity.
58	Description all as per serial item No- 56 here-in-before but for servo voltage stabilizer of capacity 100 KVA capacity.
59	Replacement of old unserviceable servo motor with new servo motor of voltage stabilizer as per existing make and type, capacity 50 KVA, complete all as specified and as directed by Engineer-In-Charge.
60	Description all as per serial item No- 59 here-in-before but for voltage stabilizer of capacity 75 KVA capacity.
61	Description all as per serial item No- 59 here-in-before but for voltage stabilizer of capacity 100 KVA capacity.
62	Supply and fixing Dimmer Booster Coilfor automatic voltage corrections,capacity 50 KVA, complete all as specified and as directed by Engineer-In-Charge.
63	Description all as per serial item No- 62 here-in-before but for voltage stabilizer of capacity 75 KVA capacity.
64	Description all as per serial item No- 62 here-in-before but for voltage stabilizer of capacity 100 KVA capacity.
65	Supply and fixing Push button suitable for servo voltage stabilizers of any capacity, as per existing design and range, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
66	Supply and fixing Digital voltmeter, range 0-500 Volts, size 96mmx96mm, flush type, complete all as specified and as directed by Engineer-In-Charge.
67	Supply and fixing Digital ammeter, range 0-100 Amps, size 96mmx96mm, square shape, complete all as specified and as directed by Engineer-In-Charge.
68	Supply and fixing Digital ammeter, range 0-100 Amps, size 96mmx96mm, square shape, complete all as specified and as directed by Engineer-In-Charge.
69	Supply & installation in replacement of Chlorine dozing system with new Altoch Dosing System , Model ADS-I, Item Nr:- ADS 100 with Non-metallic solution tank of 100 ltrs capacity with motor driven agitator to maintan uniform suspension throughout the tank, electrically operated chlorine dosing tank consisting of Dosing tank of 100 ltrs of PE/FRP MOC with PE/FRP Lid & level gauge along with single phase electric motor and agitator, 90 watts,1440 RPM, 230 Volts, 50 cycles, 02 Amp and having speed controller to reduce speed upto 800 RPM, with shaft & blade in plastic-mounted on tank. Lid must have port hole for pouring calcium hypochlorite and water when necessary. Lid must have provision for mounting dosing pump on the lid/wall incuding High pressure Single head Gear Motored adjusable Dosing Pump Set, Model:- 96 NGQ51, Item NR:- DPP965, uneffected on dry running having no loss of prime, independent of back pressure and able to handle both chemical solutions as well as suspension, 230 volts, 50 cycles, AC, 44 Rpm, 1/30 fraction HP having output 2US GPD to 40 U.S GPD complete with accessories i.e. lead tubing, connecting nuts, injection check valve, clay weight and ferrules incuding complete instalation, complete all as specified and directed by Engr-in-Charge. Make of Dosing system:- ALTOCH Dosing system, Model:- ADS-I, Item Nr:- ADS 100 ,Item type:- P & Make of High pressure Single head Gear Motored adjusable Dosing Pump:- Declibac, Model:- 96 NGQ51, Item NR:- DPP9651or equivalent in Poter & Watt Corp/Briozing Unlimited.
70	Supply only high-strength calcium based granular disinfection chemical ( 65% to 70% chlorine) containing corrosion inhibitors & anti-scalants (CIAS) to prevent damage/ encrustation/ scaling in distribution pipe lines and accessories for chlorination of drinking water, in sealed plastic drums of capacity 45 Kg each drum, complete all as directed. Note :- (i) (Make as approved by E-in-C"s Branch orby Accepting Officer in case approved makes are not exist by E-in-C"s Branch, A copy of E-in-Cs Br latest letter issued fortheir approval towards authorised manufacturer of above cited chemial shall be putup to GE before placing purchase order for record purpose and genuineness.) (ii) Approval of chemical high-strength calcium based granular disinfection chemical ( 65% to 70% chlorine) shall be given after verification of test certificates of chemical of various manufactures and other factors like chemical and safety and health hazard aspects of usage of chlorination (iii) The brand/make of the chlorination of chemical must be stated before procurement and certified by govt laboratory that it is free from the technical strength stahbility health safety and operation point of view this product is used for drinking water applications for consumption by humans and the brand /make of calcium hypochlorite is suitable for drinking water chlorination and its sample has been tested by Govt Laboratory. (iv)OEM"s claim regarding CIAS content must be ratified by E-in-C"s branch.
71	S&F inreplacement of old unserviceable/ damaged Change over switch with new Change over switch in sheet metal enclosures,ON LOAD, rating 200 Amps, four poles, 415 Volts, AC, 50 Hz, with center handle, conforms to IS:13947 (Part-3); IEC:60947-2, with stain less steel enclouser complete all as specified and as directed by Engineer-In-Charge.Make: Indo-Asian cat part No- ICAS0200 or equivalent in L&T/ Legrand/ ABB/ Siemens.
72	Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose soil including forming sides and bottom surface to required levels / slops / gradients and getting out complete.
73	Returning, filling in trenches including spreading leveling, watering well, ramming in layers n.exc 25 cm in soft / loose soil complete.
74	Removing excavated material to a distance n exc 50 m and depositing at a leve n exc 1.5 m above starting pointcomplete.
75	Taking up unserviceable cast iron/ galvanised iron/ ductile iron water mains (including all fittings) of 200mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
76	Taking up unserviceable cast iron/ ductile iron water mains (including all fittings) of 150mm bore, with spigot and socket/ flanged ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-In-Charge.
77	Supplying, laying and jointing,testing, commissioning of in replacement of 200mm bore dia of K-7 class DI ( Ductile Iron) Pipes as per IS 8329 along with cement mortar lining as per specification with rubber gaskets for flexible joints with regular ISI marked, Hydraulic testing as per specifications to specified pressure in stretches of length using pumps which should be able to provide specified test pressure, pressure gauges and other necessary equipment, labour, operation charges etc., required for testing and as per manufacturere"r instructionscomplete as per detailed specifications , complete all as specified and directed by Engineer-In-Charge.
78	Supplying, laying and jointing,testing, commissioning of in replacement of 150mm bore dia of K-7 class DI( Ductile Iron) Pipes as per IS 8329 along with cement mortar lining as per specification with rubber gaskets for flexible joints with regular ISI marked, Hydraulic testing as per specifications to specified pressure in stretches of length using pumps which should be able to provide specified test pressure, pressure gauges and other necessary equipment, labour, operation charges etc., required for testing and as per manufacturere"r instructionscomplete as per detailed specifications , complete all as specified and directed by Engineer-In-Charge.
79	M&L fittings for spigot socket pipes such as bend (any type radius and angle) and taper any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces ‘Y’ junction double branch (all socket or socket caps and plugs etc size up to 200 mm bore
80	Run lead joint, suitable for cast iron pipes and fittings of 200mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
81	Run lead joint, suitable for cast iron pipes and fittings of 150mm bore including jointing materials such as lead, spun and spun yarn, fixing in repairs, complete all as specified and as directed by Engineer-In-Charge.
82	Replacement old un-serviceable cast iron Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 200mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge.
83	Replacement old un-serviceable cast iron Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 150mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge.
84	Replacement old un-serviceable cast iron Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 100mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge.
85	Replacement old un-serviceable cast iron Sluice Valve with new Sluice Valve, cast iron, Class PN 1.6, size 80mm bore pipe, flanged type, conforming to IS: 14846-2000, ISI marked with stainless steel spindle, brass nuts and iron wheel head including jointing material such as rubber fibre board packing ring and nuts, bolts and washers of suitable size for vertical or horizintal fittings, complete all as specified and as directed by Engineer-In-Charge.
86	Taking up or down galvanised steel tubing of 15mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
87	Taking up or down galvanised steel tubing of 20mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
88	Taking up or down galvanised steel tubing of 25mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
89	Taking up or down galvanised steel tubing of 40mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
90	Taking up or down galvanised steel tubing of 50mm bore pipe, and connections, any type, including jointing materials and cleaning for re-fixing or removal to store, complete all as specified and as directed by Engineer-In-Charge.
91	Laying and fixing only"medium grade" galvanised, 15mm bore, ISI markedwater tubing including all fitting such as bends,laid in trenches or fixing along the wall, complete all as specified and as directed by Engineer-In-Charge.
92	Laying and fixing only"medium grade" galvanised, 20mm bore, ISI markedwater tubing including all fitting such as bends,laid in trenches or fixing along the wall, complete all as specified and as directed by Engineer-In-Charge.
93	Laying and fixing only"medium grade" galvanised, 25mm bore, ISI markedwater tubing including all fitting such as bends,laid in trenches or fixing along the wall, complete all as specified and as directed by Engineer-In-Charge.
94	Laying and fixing only"medium grade" galvanised, 40mm bore, ISI markedwater tubing including all fitting such as bends,laid in trenches or fixing along the wall, complete all as specified and as directed by Engineer-In-Charge.
95	Laying and fixing only"medium grade" galvanised, 50mm bore, ISI markedwater tubing including all fitting such as bends,laid in trenches or fixing along the wall, complete all as specified and as directed by Engineer-In-Charge.
96	Tubes, "medium grade" galvanised, 15mm bore, ISI markedincluding all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
97	Tubes, "medium grade" galvanised, 20mm bore, ISI markedincluding all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
98	Tubes, "medium grade" galvanised, 25mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches or fixed on walls, complete all as specified and as directed by Engineer-In-Charge.
99	Tubes, "medium grade" galvanised, 40mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
100	Tubes, "medium grade" galvanised, 50mm bore, ISI marked including all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc, laid in trenches, complete all as specified and as directed by Engineer-In-Charge.
101	Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
102	Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
103	Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
104	Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
105	Replacement old un-serviceable gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.
106	Construction of brick masonry valve pit of size 1200x1200x1200mm (internal dimensions of chamber) including plain cement concrete, M-7.5 (1:4:8), type-D2 (using 40mm graded crushed stone aggregates) 100mm thick, as in sub baseand PCC M-15 (1:2:4), type-B2 (using 40mm graded crushed stone aggregates) 100mm thick, as in flooring, brick work masonry, 23cm thick in cement mortar 1:4, rendering 15mm thick in cement mortar 1:4 on internal and external surfaces with two coat of lime wash, mild steel framed work as in valve pit covers with angle iron frame 50x50x6mm and including mild steel sheet cover 3.15mm thick complete, drilling/ welding for fixing of steel sheeting with mild steel hinges, handles and suitable locking arrangements, fastening arrangements for fixing, nuts, bolts and washers including painting with two coats of synthetic enamel paint over a coat of red oxide primer, including excavation in any type of soil, returning filling in external areas and removal the surplus soil to a distance of not exceeding 50mtrs, complete all as specified and as directed by Engineer-In-Charge.
107	Replacement old un-serviceable Non ReturnValve with new Non Return Sluice Valve, Class PN 1.6, size 200mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
108	Replacement old un-serviceable Non Return Valve with new Non Return Sluice Valve, Class PN 1.6, size 150mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
109	Replacement old un-serviceable Non Return Valve with new Non Return Sluice Valve, Class PN 1.6, size 100mm bore pipe, flanged type, including jointing material such as rubber fibre board packing rings, nuts, bolts and washers of suitable size, complete all as specified and as directed by Engineer-In-Charge.
110	Replacement old un-serviceable mild steel pipe with new mild steel ERW pipe, medium grade, 80mm bore, wall thickness not less than 5.40mm, and including flanged ends type, ISI marked, conforming to IS: 1239 (Part-I), laid in trenches/ bore well column pipe including jointing materials, complete all as specified and as directed.
111	Cleaning of overhead water tank, capacity 50,000 Gallons, height/ staging 18.85mtrs, by scraping with mild steel wire brush and removing all the silt, dirt, algae, sludge etc from the surfaces of walls and floor including removal the same to a distance not less than 50mtrs, washing the cleaned surface with bleaching powder solution thoroughly and applying two coats of lime wash on internal surfaces of reservoir, also applying two coats of cement paint of external surfaces of tank with staging after preparation of surfaces, and writing the particulars such as capacity of tank, date/ due date of tank cleaning in bold letters, on table size not less than 60cmx40cm, painted with black and white synthetic enamel paint on external surface, including painting with one coat black synthetic enamel paint to external surfaces of flow pipes with valves any type as connected with overhead water tank and making flow signs with white synthetic enamel paint, complete all as specified and directed by Engineer-In-Charge. Note :- Necessaryscaffolding and staging work alongwith Saftey Harness and other tools and plants required to complete the entire job shall be deemed to be included in the quoted rates of the item and nothing extra shall be paid extra on this account.
112	Cleaning of overhead water tank, capacity 1,00,000 Gallons, height/ staging 18.85mtrs, by scraping with mild steel wire brush and removing all the silt, dirt, algae, sludge etc from the surfaces of walls and floor including removal the same to a distance not less than 50mtrs, washing the cleaned surface with bleaching powder solution thoroughly and applying two coats of lime wash on internal surfaces of reservoir, also applying two coats of cement paint of external surfaces of tank with staging after preparation of surfaces, and writing the particulars such as capacity of tank, date/ due date of tank cleaning in bold letters, on table size not less than 60cmx40cm, painted with black and white synthetic enamel paint on external surface, including painting with one coat black synthetic enamel paint to external surfaces of flow pipes with valves any type as connected with overhead water tank and making flow signs with white synthetic enamel paint, complete all as specified and directed by Engineer-In-Charge. Note :- Necessaryscaffolding and staging work alongwith Saftey Harness and other tools and plants required to complete the entire job shall be deemed to be included in the quoted rates of the item and nothing extra shall be paid extra on this account.
113	Cleaning of dug well, size 6.0 mtr dia and 7.50 mtr depth at Khour Pump House, by disconnecting all electric connections from LT panel, starter, removing pipe line from discharge side, taking out submersible/ centrifugal pump with motor alongwith column pipe by mechanical or manual method, scraping all mud, algae, silt, sludge and other dirts by mild steel wire brush floor and including remval the same to a distance not less than 50 mtr and re-assembling/ lowering down submersible/ centrifugal pump with motor, column pipe and making all electric and water supply connection to the existing system, also applying two coats of cement base paint of external surfaces of tank with staging after preparation of surfaces, including writing the particulars such as capacity of tank, date, due date of tank cleaning in existing letter sizes, on table size not less than 60x40 cm painted with black and white synthetic enamel paint on external surfaces, complete all as directed. Note :- Necessaryscaffolding and staging work/ladders/Rope/Bucket alongwith Saftey Harness and other tools and plants required to complete the entire job shall be deemed to be included in the quoted rates of the item and nothing extra shall be paid extra on this account.
114	Collection of water from Rakhmuthi Pump House No: 01, Rakhmuthi Pump House No: 02, Mandiwala Pump House, Jourian Pump House, Khour Pump House and Hamirpur Pump House to carry out the following water tests from Indian Institute of Integrative Medicine, Jammu or any other reputed / recognized Institute:- 1:- Heavy metals and Minerals parameters of water: (a) Iron as "Fe" (b) Manganese as "Mn" (c) Zinc as "Zn" 2:- Physical parameters of water: (a) Alkalinity (b) Calcium (c) Chloride (d) Magnesium (e) Oil and Greese (f) pH value (g) Total Suspended Solids (h) Total Hardness (j) Total Dissolved Solids (k) Turbidity Note : Result sheet of above tests shall be submitted in Duplicate to the entire satsifaction of GE during submission of work done.
115	SPECIAL NOTE FOR DG SETS AND VOLTAGE STABLIZER"S REPAIRS/PUMPS: The contractor will submit a scanned copy of Memorandum of under standing from OEMs ( or authorized dealers) for the respective E/M installations. The details of OEMs are as under:- (a)DG Set (i) Kirlosker Green/Cummins(ii) Crompton Greaves (iii)Sudhir (iv) Mahindra (b)Servo Voltage Stablizer (i)Vinitek(ii)Electric field (c)Submersible and Centrifugal Pumps (i)Kirloskar(ii)KSB (iii) Jyoti
116	Amount of Schedule of credit of for Rs 1,96,365.00 shall be deducted from quoted amount.