|
| 1 | Fevicol (Wood) |
| 2 | Gamari Wood, 2\"x1\"x 6\"-0\"\" |
| 3 | Gamari Wood, 2\"x1½\"x 6\"-0\"\" |
| 4 | Gamari Wood, 2\"x2\"x 6\"-0\"\" |
| 5 | Gamari Wood, 3\"x1\"x 6\"-0\"\" |
| 6 | Gamari Wood, 4\"x1\"x 6\"-0\"\" |
| 7 | Gamari Wood, 6\"x1\"x 6\"-0\"\" |
| 8 | Gamari Wood,3\"x1½\"x 6\"-0\"\" |
| 9 | Hinge, 3° |
| 10 | Mahogany Wood, 2\"x2\"x 6\"-0\"\" |
| 11 | Mahogany Wood, 4\"x1\"x 6\"-0\"\" |
| 12 | Methylated Spirit |
| 13 | Mobile oil |
| 14 | Nail, 1\"\" |
| 15 | Nail, 1½\"\" |
| 16 | Nail, 2\"\" |
| 17 | Sal Wood, 2\"x2\"x 6\"-0\"\" |
| 18 | Sal Wood, 3\"x1\"x 6\"-0\"\" |
| 19 | Sand Paper (Roll), 100 grit |
| 20 | Sand Paper (Roll), 60 grit |
| 21 | Sand Paper (Roll), 80 grit |
| 22 | Shellac (Gala) |
| 23 | Varnish |
| 24 | Wood Screw, 6 No |
| 25 | Wood Screw, 6 No |
| 26 | Wood Screw, 6 No |
| 27 | Wood Screw, 6 No |
| 28 | Wood Screw, 6 No |
| 29 | A4 Photocopier Paper, 80 GSM |
| 30 | Cloth Duster, Big |
| 31 | Colin Spray |
| 32 | HP Toner Cartridge, 78A |
| 33 | Room Freshener |
| 34 | Samsung Printer Cartridge, ML-1676P |
| 35 | White Board Marker, Black |
| 36 | White Board Marker, Blue |
| 37 | A4 Photocopier Paper, 80 GSM |
| 38 | Binding register, Rule, No 8 |
| 39 | Brown paper laminated, thick, imperial size |
| 40 | Cellulose tape roll, Big |
| 41 | Chalk, Colour |
| 42 | Chalk, White |
| 43 | Cloth duster, large, imperial size, 30\"\"x22\"\" |
| 44 | Clutch Pencil push type, 0.5 mm, with lead 1 box with each pencil |
| 45 | Cover file |
| 46 | Drawing Sheet - Milky White, Imperial Size, 31.8 kg per Ream |
| 47 | Eraser, Long size, Non-Dust |
| 48 | Fevicol - General purpose, White Adhesive - 200 g |
| 49 | Flat file |
| 50 | Fool\"s Cap paper, plain, white |
| 51 | Gems clip, big, made of steel |
| 52 | Stapler Pin, HS 45 P/ NO. 24/6-26/6 |
| 53 | Stapler Pin, Nos 10 1m |
| 54 | Stapler, No 10 |
| 55 | Stapler, No HS 45 P |
| 56 | Steel Scissors, 6\" |
| 57 | Wood pencil Extra Dark, HB |
| 58 | Wood pencil sharpener |
| 59 | A4 Photocopier Paper, 80 GSM |
| 60 | Binding register, Rule, Nos4 |
| 61 | Brown paper, thick, imperial size |
| 62 | Cellulose tape roll, Big |
| 63 | Chalk, Colour |
| 64 | Chalk, White |
| 65 | Cloth duster, large, imperial size, 30\"\"x22\"\" |
| 66 | Clutch Pencil push type, 0.5 mm, with lead 01 box with each pencil |
| 67 | Cover file |
| 68 | Drawing Sheet - Milky White, Imperial Size, 31.8 kg per Ream |
| 69 | Eraser, Long size, Non Dust |
| 70 | Fevicol - General purpose, White Adhesive - 200 g |
| 71 | Flat file |
| 72 | Fool\"s Cap paper, plain, white |
| 73 | Gems clip, Big size, Made of steel |
| 74 | Metallic Tape, 30 m long |
| 75 | Printer Cartridge- HP Laser jet 1020 Plus, Black |
| 76 | Stapler Pin, HS 45 P/ NO. 24/6-26/6 |
| 77 | Stapler Pin, No 10 1m |
| 78 | Stapler, No 10 |
| 79 | Stapler, No HS 45 P |
| 80 | Steel Scissors, 6\" |
| 81 | Tracing paper roll (GATWAY 90/100 ,1016mm x 18.2m) |
| 82 | Wood pencil Extra Dark, HB |
| 83 | Wood pencil sharpener |
| 84 | M.S. Flat, 50 mm x 10 mm |
| 85 | M.S. Flat, 65 mm x 10 mm |
| 86 | M.S. Flat, 75 mm x 10 mm |
| 87 | M.S. Round Bar, Dia 40 mm |
| 88 | Washer, 3/8\" (For Hacksaw frame) |
| 89 | Washer, 5/16\" (For Hacksaw frame) |
| 90 | Wing Nut, 3/8\" (For Hacksaw frame) |
| 91 | Wing Nut, 5/16\" (For Hacksaw frame) |
| 92 | 1-way switch, 5A |
| 93 | 2-way switch, 5A |
| 94 | 3 pin top, 5A |
| 95 | Batten holder |
| 96 | Bell push switch, 6A |
| 97 | Calling Bell |
| 98 | Capacitor, 0.1uF, 250V |
| 99 | Capacitor, 1000uF, 25V |
| 100 | Capacitor, 100uF, 25V |
| 101 | Capacitor, 10uF, 25V |
| 102 | Capacitor, 2.25µFD |
| 103 | Capacitor, 4uF, 400V AC |
| 104 | Carbon filament lamp, 40W |
| 105 | Ceiling fan regulator |
| 106 | Ceiling rose, 6A |
| 107 | Contactor with POWE, NO & NC contact, 415V |
| 108 | Cotton waste |
| 109 | Diac, DB3 |
| 110 | Diode 1N 4007 |
| 111 | Diode 1N 5408 (3A) |
| 112 | Diode 6A4 (6A) |
| 113 | Electronic Fan regulator |
| 114 | Flexible copper wire |
| 115 | Fuse Piano Type, 16A |
| 116 | Fuse Piano Type, 6A (Kit-Kat) |
| 117 | G.I. wire, 10 SWG |
| 118 | G.I. wire, 20 SWG |
| 119 | Indicator |
| 120 | Kit-Kat fuse, 5A |
| 121 | Mercury Vapour, 80W Choke |
| 122 | Mercury Vapour, 80W Lamp |
| 123 | Mercury Vapour, 80W, Lamp Holder (screw type) |
| 124 | NO & NC push switch |
| 125 | P.V.C. conduit corner, ½ inch |
| 126 | P.V.C. conduit pipe, ½ inch |
| 127 | P.V.C. conduit tee, ½ inch |
| 128 | P.V.C. copper wire, 1.5 sq. mm |
| 129 | P.V.C. Electrical tape - ½\"\" |
| 130 | P.V.C. shaddle for ½ inch conduit |
| 131 | P.V.C. tape |
| 132 | Pendant holder |
| 133 | Piano type Single Way Switch, 6A |
| 134 | Piano type Socket, 6A |
| 135 | Piano type Switch, 16A |
| 136 | Pin Type, 200W |
| 137 | Pin Type, 60W |
| 138 | Plastic bucket, 20 liter |
| 139 | Plug tap (2 pin), 6A |
| 140 | Plug tap (3 pin), 16A |
| 141 | Plug tap (3 pin), 6A |
| 142 | Plastic mug, 2 liter |
| 143 | Pot, 500k with On-Off |
| 144 | PVC button Holder |
| 145 | PVC Cu wire, 0.75 sq. mm |
| 146 | PVC Cu wire, 1.0 sq. mm |
| 147 | PVC Cu wire, 2.5 sq. mm |
| 148 | PVC Pendant Holder |
| 149 | Socket Piano Type, 16A |
| 150 | Sodium Vapour Lamp choke |
| 151 | Sodium Vapour Lamp Holder |
| 152 | Sodium Vapour Lamp Ignites |
| 153 | Sodium Vapour Lamp, 80W |
| 154 | Soldering Paste |
| 155 | Soldering Rung |
| 156 | Soldering wire |
| 157 | Transmitter, 2N6292 |
| 158 | Transmitter, BC547 |
| 159 | Transmitter, BC557 |
| 160 | Transmitter, BD139 |
| 161 | Transmitter, BD140 |
| 162 | Triac, BT136 |
| 163 | Tube Light 40W, 230V 50Hz |
| 164 | Tube light, 20W |
| 165 | Tube light, 40W |
| 166 | Tungsten filament lamp, 100W |
| 167 | Tungsten filament lamp, 200W |
| 168 | Tungsten filament lamp, 60W |
| 169 | Two Way Piano Type Switch, 6A |
| 170 | Voltage Regulator, LM 7805, 5V |
| 171 | Voltage Regulator, LM 7812, 12V |
| 172 | Zener diode, 12V, 1W |
| 173 | Zener diode, 5.1V, 1W |
| 174 | 2N2222 |
| 175 | 2SC2233 |
| 176 | 4-bit asynchronous binary counter - 7493 |
| 177 | 4-bit left/right shift register-74194 |
| 178 | 4-bit synchronous binary counter - 74163 |
| 179 | 4-bit synchronous up/down decode counter - 74190 |
| 180 | 556 (dual timer) |
| 181 | 74151 (8 to 1) |
| 182 | 74153 (2x4 to 1) |
| 183 | 7447 (for common anode seven segment) |
| 184 | 7448 (for common cathode seven segment) |
| 185 | 9V flat type battery for digital multimeter |
| 186 | A/D converter ADC0809 |
| 187 | AC128 |
| 188 | AND gate - 7408 |
| 189 | BC107 |
| 190 | BC328 |
| 191 | BC350 |
| 192 | BC547 |
| 193 | BC548 |
| 194 | BC557 |
| 195 | BF494B |
| 196 | BF495 |
| 197 | Binary Adder - 7483 |
| 198 | Buzzer (Continuous sound), 3V to 12V DC |
| 199 | Ceramic Capacitors (Disc type): 0.001 µF |
| 200 | Ceramic Capacitors (Disc type): 0.002 µF |
| 201 | Ceramic Capacitors (Disc type): 0.01µF |
| 202 | Ceramic Capacitors (Disc type): 0.02µF |
| 203 | Ceramic Capacitors (Disc type): 0.022 µF (22KpF) |
| 204 | Ceramic Capacitors (Disc type): 0.1 µF |
| 205 | Ceramic Capacitors (Disc type): 0.22µF |
| 206 | Ceramic Capacitors (Disc type): 5.6nF |
| 207 | CFL lamp - 15W |
| 208 | CL100 |
| 209 | Crystal - 16MHz |
| 210 | Crystal - 20 MHz |
| 211 | Crystal - 455KHz |
| 212 | Crystal - 4MHz |
| 213 | Crystal - 8 MHz |
| 214 | D/A converter: DAC0808 |
| 215 | DC Relay - 24V: 1CO or 2CO |
| 216 | Decade binary counter- 7490 |
| 217 | Decade binary counter- 7494 |
| 218 | Decoder, 3 to 8 liner - 74131 |
| 219 | Demultiplexer - 74138 |
| 220 | DIAC- DB3 |
| 221 | Diode 1N5822 |
| 222 | Diode IN5402 |
| 223 | Diode MBR 340 |
| 224 | Earth Leakage Circuit Breaker (ELCB), Single Phase 30mA, 32A Standard size white |
| 225 | Electrical contractor, Magnetic Single Phase Contractor 16A |
| 226 | Electrolytic Capacitors: 0.047µF/25V |
| 227 | Electrolytic Capacitors: 1000uF/25V |
| 228 | Electrolytic Capacitors: 1000uF/50V |
| 229 | Electrolytic Capacitors: 1000uF/63V |
| 230 | Electrolytic Capacitors: 100uF/35V |
| 231 | Electrolytic Capacitors: 10uF/50v |
| 232 | Electrolytic Capacitors: 1uF/25V |
| 233 | Electrolytic Capacitors: 2.2µF/63V |
| 234 | Electrolytic Capacitors: 2200uF/50V |
| 235 | Electrolytic Capacitors: 220uF/63V |
| 236 | Electrolytic Capacitors: 22uF/50V |
| 237 | Electrolytic Capacitors: 3.3uF/63V |
| 238 | Electrolytic Capacitors: 4.7uF/63V |
| 239 | Electrolytic Capacitors: 6.8uF/63V |
| 240 | Electrolytic Capacitors:0.47µF/25V |
| 241 | Encoder IC: 74148 (8 to 3 bit) |
| 242 | Ex-OR gate - 7486 |
| 243 | FET - BFW10 |
| 244 | Flip-flop, D - type : 74173 (four-flops) |
| 245 | Flip-flop, D - type: 74173 (4 flip-flops) |
| 246 | Flip-flop, JK: 7476 (with present, Clear J and K) |
| 247 | Function generator IC: 8038 |
| 248 | Glass cartage fuse - 3A |
| 249 | Glass fuse holder |
| 250 | Heat absorbing thermal compound (paste type) |
| 251 | IC - 74155 |
| 252 | IC - 74156 |
| 253 | IC- LM 2576 |
| 254 | IC- MC34063 |
| 255 | IC Vero board, 2.5\"X6\" |
| 256 | IC Vero board, 6\" X 5 \" |
| 257 | IC-CD4017 |
| 258 | IGBT - IRGB15B60KD or IRGS15B60KD or IRGSL15B60KD |
| 259 | Inductor 100µH 2 Amps |
| 260 | Inductor, 150µH |
| 261 | Insulation tape, PVC, 220 V, ½ inch |
| 262 | LCD display - 2x16 |
| 263 | LED - 10mm Round Shape Blue Colour |
| 264 | LED - 10mm Round Shape Green Colour |
| 265 | LED - 10mm Round Shape Red Colour |
| 266 | LED - 10mm Round Shape White Colour |
| 267 | LED - 5mm round shape Blue Colour |
| 268 | LED - 5mm round shape Green Colour |
| 269 | LED - 5mm round shape Red Colour |
| 270 | LED - 5mm round shape White Colour |
| 271 | LED - 5mm round shape Yellow Colour |
| 272 | LED driver boards for 9W lamp and 18W Lamp |
| 273 | LED driver boards LED tube light |
| 274 | LED lamp - 3W |
| 275 | LM317 |
| 276 | LM324 |
| 277 | LM358 |
| 278 | LM724 |
| 279 | LM741 |
| 280 | LM7905 |
| 281 | LM7909 |
| 282 | LM7914 |
| 283 | Loud speaker - 2\"8 ohms, 2W |
| 284 | Low Power General Purpose Rectifier Diodes 1N4007 |
| 285 | Microcontroller-AT89552 |
| 286 | MOSFET- B5170 |
| 287 | MOSFET- IRF541 |
| 288 | Multi Strand Wire (7/36 gauge), Red 02, Black 02 |
| 289 | MW OSC coil for radio |
| 290 | NAND gate - 7402 |
| 291 | NAND gate - CD4003 |
| 292 | NAND gate-7400 |
| 293 | NAND gate-7410 |
| 294 | NE555 |
| 295 | NOT gate - 7404 |
| 296 | Octal D type latch: 7475, (Quad D - latch) |
| 297 | Opto SCR-4N39 or 4N40 or H11C4 |
| 298 | Opto TRAIC - MOC3011 |
| 299 | Opto Transistor - MCT2E |
| 300 | OR gate - 7432 |
| 301 | Photo Diode - 5 mm black colour, Infrared |
| 302 | Photo Transistor - L14F1 |
| 303 | Photo Voltaic cell - Solar Plate 12V, 5W or more |
| 304 | PIPO register-7495 |
| 305 | Power cord (230V 10A), 2 meter |
| 306 | Power Transistors - 2N3055 |
| 307 | Radial Polyester Film/Foil capacitors: 0.001uF/100V |
| 308 | Radial Polyester Film/Foil capacitors: 0.022uF/400V |
| 309 | Radial Polyester Film/Foil capacitors: 0.1uF/400V |
| 310 | Radial Polyester Film/Foil capacitors: 100uF/100V |
| 311 | Relay (SPST) 9V or 12V |
| 312 | Resistors: 10K?, 0.5W |
| 313 | Resistors: 120? 0.5W |
| 314 | Resistors: 12kO, 0.25W |
| 315 | Resistors: 220? 0.5W |
| 316 | Resistors: 220? 0.5W |
| 317 | Resistors: 470? 0.5W |
| 318 | Resistors: 470? 2W |
| 319 | RJ45 Connectors, RJ12 Connectors |
| 320 | Schottky diode 1N5818 |
| 321 | SCR - 2P4M |
| 322 | SCR - TYN604 |
| 323 | Seven Segment Display - Common Anode (Medium size) |
| 324 | Seven Segment Display - Common Cathode (Medium size) |
| 325 | Single Strand Wire or Red 02, Black 02, Yellow 01 Hookup Wire (1/25 gauge) |
| 326 | SIPO register-74164 |
| 327 | SK100 |
| 328 | SL100 |
| 329 | SMD capacitors: A475 and other two values |
| 330 | SMD diodes: Three different values |
| 331 | SMD resistors: 01A |
| 332 | SMD resistors: 01C |
| 333 | SMD resistors: 01Y |
| 334 | SMD resistors: 068 |
| 335 | SMD resistors: 102 |
| 336 | SMD resistors: 2R3 |
| 337 | SMD resistors: 472 |
| 338 | SMD resistors: 68X |
| 339 | SMD resistors: 76X |
| 340 | SMD resistors: R382 |
| 341 | SMPS for desktop PC |
| 342 | SMPS for Laptop |
| 343 | SMPS for LED TV |
| 344 | SMPS for Mobile charger |
| 345 | SPST switch - 250V 16A |
| 346 | Step down transformer 230V/24V, 1A |
| 347 | Tantalum Capacitors: 10µF/25V |
| 348 | Tantalum Capacitors: 100µF/35V |
| 349 | Tantalum Capacitors: 47 µF/25 |
| 350 | TRIAC- BT136 |
| 351 | UJT- 2N2646 |
| 352 | Unshielded Twisted pair(UTP) cable :- CAT6/CAT5e 4, Pair UTP solid PVC cable |
| 353 | Variable trimer capacitors: 0-33pF or 0-50pF trimer Capacitor |
| 354 | Wire sleeve (2mm to 3mm dia), black |
| 355 | Wire sleeve (2mm to 3mm dia), green |
| 356 | Wire sleeve (2mm to 3mm dia), Red |
| 357 | Wire sleeve (2mm to 3mm dia), yellow |
| 358 | Wire, 0.75 sq. mm, Red |
| 359 | Brush, 2\" |
| 360 | C.I. Block, 100 mm x 80 mm x 20 mm x 20 Nos |
| 361 | C.I. Block, 100 mm x 80 mm x 60 mm x 20 Nos |
| 362 | C.I. Block, 70 mm x 70 mm x 70 mm x 30 Nos |
| 363 | C.I. Block, 80 mm x 80 mm x 50 mm x 30 Nos |
| 364 | C.I. Block, 80 mm x 80 mm x 80 mm x 10 Nos |
| 365 | C.I. Round Block, Dia 140 mm x Length 25 mm x 20 Nos |
| 366 | Cotton Waste |
| 367 | Diamond Dresser tool |
| 368 | Emery Cloth, 120 grit |
| 369 | Gear Oil, Servo 68 |
| 370 | Grease, Castrol Premium Long Life |
| 371 | Hacksaw Blade, 24 T.P.I. |
| 372 | HSS Tool, 3/8\"x3/8\"x3\" (S400) |
| 373 | M.S. Flat, 90 mm x 16 mm |
| 374 | M.S. Round Bar, Dia 35 mm |
| 375 | M.S. Square Bar, 10 mm x 10 mm |
| 376 | Soap Bar, Big |
| 377 | Bar Shop |
| 378 | Cotton Waste |
| 379 | 1st Aid - Absorbent compress dressings, 5\" x 9\" |
| 380 | 1st Aid - Adhesive bandages, Assorted sizes & shapes |
| 381 | 1st Aid - Adhesive cloth tape (plaster), 75 mm x 10 m |
| 382 | 1st Aid - Adhesive tape, 19 mm x 24.5 m |
| 383 | 1st Aid - Alcohol-free cleansing wipes |
| 384 | 1st Aid - Antiseptic wipe packets |
| 385 | 1st Aid - Basic first aid manual |
| 386 | 1st Aid - Breathing barrier (with one-way valve) |
| 387 | 1st Aid - Crêpe rolled bandage, 3\" |
| 388 | 1st Aid - Distilled water for cleaning wounds, pH 7 ~ pH 5.8 |
| 389 | 1st Aid - Emergency blanket, Mylar, 1.4 m x 2.1 m |
| 390 | 1st Aid - Eye wash and eye bath |
| 391 | 1st Aid - Gauze roll (roller) bandage, 150 mm x 3 m |
| 392 | 1st Aid - Hydrocortisone ointment, 105g, 1% w/w |
| 393 | 1st Aid - Instant cold compress, 6\" x 9\" |
| 394 | 1st Aid - Mupirocin ointment, 5 g, 2% w/w |
| 395 | 1st Aid - Nonlatex gloves, Large |
| 396 | 1st Aid - Oral thermometer, non-mercury/non-glass, digital |
| 397 | 1st Aid - ORS, Contains 5 sachets of ORS and 14 tablets of Zinc Sulfate |
| 398 | 1st Aid - Paracetamol, 650 mg |
| 399 | 1st Aid - Safety pin, 50 mm |
| 400 | 1st Aid - Scissors, SS, 6\" |
| 401 | 1st Aid - Sterile eye dressing |
| 402 | 1st Aid - Sterile gauze pad, 3\" x 3\" |
| 403 | 1st Aid - Sterile gauze pad, 4\" x 4\" |
| 404 | 1st Aid - Triangular bandage, 900 mm x 900 mm x 1270 mm |
| 405 | 1st Aid - Tweezers, SS, 4\" |
| 406 | Automotive fuse, 1A |
| 407 | Automotive fuse, 2A |
| 408 | Automotive fuse, 3A |
| 409 | Automotive fuse, 5A |
| 410 | Battery, lead acid, 12 V, 80 Ah |
| 411 | Brake fluid, DOT 3 |
| 412 | Brush, wire, hard, 51 mm X 150 mm |
| 413 | Brush, wire, soft, 50 mm X 150 mm |
| 414 | Bucket, plastic , 5 liter |
| 415 | Bucket, plastic, 20 liter |
| 416 | Carbon Tetrachloride (CCl4) |
| 417 | Chalk (CaCO3), Assorted colour |
| 418 | Chalk (CaCO3), White |
| 419 | Cleaning brush, steel, 2 inch |
| 420 | Cloth, cotton, 300 mm X 300 mm |
| 421 | Cotton rag |
| 422 | Cotton waste |
| 423 | Crate, plastic, 400 x 300 x 200 mm |
| 424 | Cutting compound, SERVOcut 64 |
| 425 | Diodes, 1N4148 |
| 426 | Diodes, 1N5408 |
| 427 | Diodes, 1N60 |
| 428 | Diodes, BZX55C 7V5 0.5W |
| 429 | Diodes, W04M 400V 1A |
| 430 | Distilled water, pH 7 ~ pH 5.8 |
| 431 | Emery cloth, 220 grit |
| 432 | Emery cloth, 36 grit |
| 433 | Emery cloth, 100 grit |
| 434 | Emery cloth, 120 grit |
| 435 | Emery cloth, 40 grit |
| 436 | Emery cloth, 50 grit |
| 437 | Emery cloth, 60 grit |
| 438 | Emery cloth, 80 grit |
| 439 | Engine oil, SAE 15W40 |
| 440 | Fire extinguisher, Class ABC, 6 kg |
| 441 | Fire extinguisher, Class D, 4 kg |
| 442 | Funnel, Medium |
| 443 | Gloves, nitrile |
| 444 | Gloves, vinyl |
| 445 | Grease, graphite |
| 446 | Grease, MP, IS:12203:1987 (Servo Molex) |
| 447 | Grease, silicon |
| 448 | Grease, vegetable-based |
| 449 | Hacksaw blade, 300 X 12.5 X 0.6, 18 TPI/LA |
| 450 | Hydrometer |
| 451 | Inspection lamp socket with shield, wire (10 m) and plug with integrated fuse, 220V, 5A |
| 452 | Insulation tape, PVC, 220 V, ½ inch |
| 453 | Isopropyl alcohol |
| 454 | Lapping abrasives, coarse & fine |
| 455 | LED, green, mm |
| 456 | LED, red, mm |
| 457 | LED, white, mm |
| 458 | LED, yellow, mm |
| 459 | M.S. flat, 50 X 12 mm |
| 460 | M.S. flat, 65 X 10 mm |
| 461 | M.S. round bar, Ø 12 mm |
| 462 | Petroleum jelly |
| 463 | Plastic mug, 2 liter |
| 464 | Power steering fluid, Meets or exceeds requirement Of GM DEXRON®-IID |
| 465 | Prussian blue |
| 466 | Radiator/Engine coolant, Meets or exceeds requirement Of JIS K 2234 Class 2, ASTM D3306, BS 6580:2010 |
| 467 | Resistors, 10 Ohm 2 Watt |
| 468 | Resistors, 10k Ohm ¼ Watt |
| 469 | Resistors, 180 Ohm ¼ Watt |
| 470 | Resistors, 20k Ohm Preset Variable |
| 471 | Resistors, 470k Ohm 1 Watt |
| 472 | Safety glasses |
| 473 | Skate Board/Trolley on 4 Castor Wheels for Under Chassis Work |
| 474 | Solder |
| 475 | Solder flux |
| 476 | Sulfuric acid, Concentrated |
| 477 | Test lamp, 100 W |
| 478 | Test lamp, 60 W |
| 479 | Transistor NPN 12 V 2 A Bipolar Transistors - BJT |
| 480 | Transistor, 2N5401 |
| 481 | Transistor, BT136 |
| 482 | Transistor, IRFZ44 |
| 483 | Transistor, PN2222A |
| 484 | Tray, plastic, 565 x 365 x 165 mm |
| 485 | Vest/baniyan cloth |
| 486 | Washing powder |
| 487 | Wire, single core, copper, flexible, insulated, 2.5 sq. mm |
| 488 | Angular Stop Cock, ½\" |
| 489 | Basin Waste, 4\" |
| 490 | Bib Cock, ½\" |
| 491 | Connector Pipe, 2\" |
| 492 | P.V.C. Elbow, 1\" |
| 493 | P.V.C. Pipe, ¾\" |
| 494 | P.V.C. Pipe, 1\" |
| 495 | P.V.C. Pipe, 1-¼\" |
| 496 | P.V.C. Tee, 1\" |
| 497 | Piller Cock, ½\" |
| 498 | Stop Cock, ½\" |
| 499 | Teflon Tape |
| 500 | Annealed Copper Tube - ¼\" Dia I.S.I. Grade |
| 501 | Brazing Stick/Rod-Copper Phosphorus |
| 502 | Capillary Tube - 0.033\" O.D., I.S.I. Grade |
| 503 | Door Gasket - 165 Liter Refrigerator |
| 504 | Door Gasket - 300 Liter Frost free Refrigerator - Kelvinator Made |
| 505 | Flare Nut - ¼\" Dia Brass Made |
| 506 | H.C. Blend Refrigerant (Replace of CFC) - 170 gram Container |
| 507 | Insulation tape, PVC, 220 V, ½ inch |
| 508 | Module Bridge Rectifier - Current Rating 1 amp. or 5 A) Any Number |
| 509 | Non-Return Pin Valve - ¼\" Dia Copper Made |
| 510 | Battery for total station, LEICA 405 power model Nos \"GEB-121\" |
| 511 | Binding register, Ruled, No 4 |
| 512 | Brown paper, thick, imperial size |
| 513 | Cellulose tape roll, Big |
| 514 | Chalk Colour |
| 515 | Chalk White |
| 516 | Cloth Duster, large, imperial size, 30\"\"x22\"\" |
| 517 | Drawing Sheet - Milky White, Imperial Size, 31.8 kg per Ream |
| 518 | Eraser Long size, Non-Dust |
| 519 | Fevicol - General Purpose White Adhesive - 200 g |
| 520 | Field book for survey work Double line |
| 521 | Firmer Chisel With PVC Handle B |
| 522 | Fool\"s Cap paper, plain, white |
| 523 | Gems clip Big size, made of steel |
| 524 | Level book for survey work |
| 525 | Metallic Tape 30 m long |
| 526 | Pencil push type 0.5 mm, with lead 1 box with each pencil |
| 527 | PVC Tape 30 m long |
| 528 | Stapler No 10 |
| 529 | Stapler No HS 45 P |
| 530 | Stapler Pin HS 45 P/ NO. 24/6-26/6 |
| 531 | Stapler Pin No 10 1m |
| 532 | Steel Scissors 6\" |
| 533 | Tracing paper roll (GATWAY 90/100, 1016mm x 18.2m) |
| 534 | Wood pencil Extra Dark, HB |
| 535 | Wood pencil sharpener |
| 536 | Boring Tool - Forged HCS, as per sample, Left Handsize ¾\" |
| 537 | Boring Tool- Forged HCS, as per sample, Right Hand size ¾\" |
| 538 | Cemented Carbide Tipped Tool - V shape tool (as per sample), IK-20-¾\" |
| 539 | Centre Drill - (Miranda/IT)-A-4 |
| 540 | Cloth Duster - 1½\" X 1½\" |
| 541 | Cotton Waste |
| 542 | Emery Cloth, 120 grit |
| 543 | Emery Cloth, 80 grit |
| 544 | HSS Hacksaw Blade - 1.8mm Pitch x 250mm Long |
| 545 | HSS Lathe Cutting Tool (Miranda, STP+++)-½\"x½\"x 6\" Long |
| 546 | HSS Lathe Cutting Tool (Miranda, STP+++)-3/8\"x3/8\"x3\" Long |
| 547 | M.S. Round Bar - 40mm Dia |
| 548 | M.S. Round Bar - 45mm Dia |
| 549 | M.S. Round Bar - 50mm Dia |
| 550 | M.S. Round Bar - 60mm Dia |
| 551 | M.S. Sq. Bar-½\"x½\" |
| 552 | Parting Off Tool - 3/32\"x½\"x 4\"/2.38mm x 12.7mm x 100mm |
| 553 | Parting Off Tool High Carbon Steel serial number 15 |
| 554 | Soap Bar - 170 g(Rin/Wheel) |
| 555 | Tool Post Bolt (Hardened and Tempered) As Per Sample-3/8\" x 2\" Length |
| 556 | Abrasive cutter wheel -355 x 3.0 x 25.4mm Dia (BOSCH) |
| 557 | Acetylene regulator two stage IOL/ESAB make |
| 558 | Aluminium filler rod - 3 mm Dia |
| 559 | Aluminium flat - 6 mm x 30 mm |
| 560 | Aluminium sheet - 3 mm x 4\" x 8\" x 2 Nos |
| 561 | Angular cutter wheel - 105 x 1 x 16mm (BOSCH) |
| 562 | Arc Welding black filter glass DIN shade 11 |
| 563 | Arc Welding black filter glass DIN shade 12 |
| 564 | Argon regulator with flow stage IOL/ESAB make |
| 565 | C - Clamp, 6\"\" |
| 566 | C.C.M.S. filler rod - 1.6mm dia |
| 567 | C.C.M.S. filler rod - 1.8mm dia |
| 568 | Cellotape - 01\"\" |
| 569 | Cloth duster |
| 570 | CO2 regulator with heater flow meter IOL/ESAB make |
| 571 | CO2 spindle key |
| 572 | Colour chalk |
| 573 | Contact tip for MIG/MAG as per sample |
| 574 | Cotton waste |
| 575 | Earth clamp (Cu/Cu alloy) |
| 576 | Emery cloth, 80 grit |
| 577 | Emery cloth, 100 grit |
| 578 | Emery cloth, 120 grit |
| 579 | Gas Welding Goggles |
| 580 | Gas welding rubber hose pipe (Acetylene) |
| 581 | Gas welding rubber hose pipe (Oxygen) |
| 582 | Hacksaw blade - 18 TPI |
| 583 | Hand Shield (I.S.I.) with DIN glass |
| 584 | Helmet for arc welding (I.S.I. mark) |
| 585 | Insulation tape, PVC, 220 V, ½ inch |
| 586 | Leather hand gloves - 14\"\" |
| 587 | Leather hand gloves - 18\"\" |
| 588 | M.S. Electrode - 1.6mm Dia |
| 589 | M.S. Electrode - 2.5 mm Dia |
| 590 | M.S. Electrode - 3.5 mm Dia |
| 591 | M.S. Electrode - 4 mm Dia |
| 592 | M.S. Flat - 10 mm x 50 mm |
| 593 | M.S. Flat - 6 mm x 50 mm |
| 594 | M.S. Flat - 8 mm x 50 mm |
| 595 | MIG/MAG Welding nozzle as per sample |
| 596 | Oxygen regulator two stage IOL/ESAB make |
| 597 | Powersaw blade - 12\"\" |
| 598 | Powersaw blade - 14\"\" |
| 599 | Powersaw blade - 18\"\" |
| 600 | Silicon spray for MIG/MAG Welding |
| 601 | Teflon tape -½\"\" (P.T.F.E.) |
| 602 | Tip/Nozzle cleaner |
| 603 | Tongs - 16\"\" |
| 604 | Tungsten electrode - 2.4 mm Dia Thoriated |
| 605 | Tungsten electrode - 3.00 mm Dia zirconiated |
| 606 | Twist drill bit (straight shank) H.S.S. - 10mm |
| 607 | Twist drill bit (straight shank) H.S.S. - 4mm |
| 608 | Twist drill bit (straight shank) H.S.S. - 6mm |
| 609 | Twist drill bit (straight shank) H.S.S. - 8mm |
| 610 | Welding cable - 95 Sq. mm copper |
| 611 | White chalk |
| 612 | White glass for hand shield (clean visibility) |
| 613 | B.C. Electric Bulb 100 W, 230V, 50Hz |
| 614 | B.C. Electric Bulb 15 W, 230V, 50Hz (Blue Colour) |
| 615 | B.C. Electric Bulb 15 W, 230V, 50Hz (Green Colour) |
| 616 | B.C. Electric Bulb 15 W, 230V, 50Hz (Red Colour) |
| 617 | B.C. Electric Bulb 15 W, 230V, 50Hz (Yellow Colour) |
| 618 | B.C. Electric Bulb 200 W, 230V, 50Hz |
| 619 | B.C. Electric Bulb 40 W, 230V, 50Hz |
| 620 | B.C. Electric Bulb 60 W, 230V, 50Hz |
| 621 | B.L. Angel Holder 6A, 230V, 50Hz |
| 622 | B.L. Batten Holder 6A, 230V, 50Hz |
| 623 | Bakelite Pendent Holder 6A, 230V, 50Hz |
| 624 | Bakelite Connector 2 Way 16 Amps |
| 625 | Bare Copper Wire 10 SWG |
| 626 | Bare Copper Wire 12 SWG |
| 627 | Bare Copper Wire 18 SWG |
| 628 | Bare Copper Wire 14 SWG |
| 629 | Bare Copper Wire 24 SWG |
| 630 | Brass Holder 6A, 230V, 50Hz |
| 631 | Brass Nail, ½\" |
| 632 | Carbon Tetrachloride (CCl4) |
| 633 | Ceiling Rose 2 Plate 6 Amps 230V |
| 634 | CFL Lamp12W, 230V, 50Hz |
| 635 | CFL Lamp24W, 230V, 50Hz |
| 636 | CFL Lamp 18W, 230V, 50Hz |
| 637 | Complete Double Tube Light Fittings 40W, 230V, 50Hz |
| 638 | Complete Single Tube Light Fittings 40W, 230V, 50Hz |
| 639 | Copper Choke 40W, 230V, 50Hz |
| 640 | Crimping Eyelets Lugs 6 mm Dia |
| 641 | Crimping Spade Lugs 10 Amps |
| 642 | Crimping Spade Lugs 16 Amps |
| 643 | Crimping Spade Lugs 6 Amps |
| 644 | Crocodile Clip 6 Amps. (Red & Black) |
| 645 | Electric Bell230V, 50Hz (Ding Dong) |
| 646 | Electric Buzzer 230V 50Hz |
| 647 | Electrolyte Capacitor 2.25 µFD 440V, 50Hz |
| 648 | Electrolyte Capacitor 2.50 µFD 440V, 50Hz |
| 649 | Electrolyte Capacitor 4.00 µFD 440V, 50Hz |
| 650 | Fan Regulator 60W, 230V, 50Hz |
| 651 | Fuse Wire 10A |
| 652 | Fuse Wire 15A |
| 653 | Fuse Wire 5A |
| 654 | G.I. Wire 18 SWG |
| 655 | Intermediate Switch6A, 250V, 50Hz |
| 656 | Link Clip With Linking Eye 25 mm |
| 657 | Link Clip With Linking Eye 32 mm |
| 658 | Link Clip With Linking Eye 40 mm |
| 659 | M.C.B.6A, 230V |
| 660 | M.C.B. Double Pole 10 Amps, 230V 50Hz |
| 661 | OFF Push Switch Red Colour |
| 662 | ON Push Switch Green Colour |
| 663 | Overhead Conductor Aluminium P.V.C. Insulated, 7/16 |
| 664 | Overload Relay 6 - 10A, 440V, 50Hz |
| 665 | P.V.C. Box 4\" x 4\" |
| 666 | P.V.C. Box 4\" x 6\" |
| 667 | P.V.C. Box 8\" x 12\" |
| 668 | P.V.C. Box 8\" x 6\" |
| 669 | P.V.C. Box 8\" x 10\" |
| 670 | P.V.C. Casing & Capping ½\" |
| 671 | P.V.C. Casing & Capping ¾\" |
| 672 | P.V.C. Casing & Capping 1\" |
| 673 | P.V.C. Copper Wire 1/18 |
| 674 | P.V.C. Copper Wire 3/20 |
| 675 | P.V.C. Flexible Wire, 23/36 |
| 676 | P.V.C. Insulated Copper Cable, 7/22 |
| 677 | P.V.C. Insulated Copper Wine 660 V, 0.75 Sq. mm |
| 678 | P.V.C. Insulated Copper Wine 660 V, 1.00 Sq. mm |
| 679 | P.V.C. Insulated Copper Wine 660 V, 1.50 Sq. mm |
| 680 | P.V.C. Insulated Copper Wine 660 V, 4.00 Sq. mm |
| 681 | P.V.C. Insulated Copper Wire 660 V, 2.50 Sq. mm |
| 682 | P.V.C. Insulated Flat Twin Cone Copper Cable, 1.00 Sq. mm |
| 683 | P.V.C. Insulation Tape Black, Steel Grip, Big Size |
| 684 | P.V.C. Insulation Tape, Blue, Steel Grip, Big Size |
| 685 | P.V.C. Insulation Tape, Green, Steel Grip, Big Size |
| 686 | P.V.C. Insulation Tape, Red, Steel Grip, Big Size |
| 687 | P.V.C. Insulation Tape, Yellow, Steel Grip, Big Size |
| 688 | Piano Type (One Way Switch) 16A, 230V, 50 Hz |
| 689 | Piano Type (One Way Switch) 6A, 230V, 50 Hz |
| 690 | Piano Type (Two Way Switch) 6A, 230V, 50 Hz |
| 691 | Piano Type Fuse 10A, 250V, 50Hz |
| 692 | Piano Type Indicator 250V, 50Hz |
| 693 | Piano Type Socket 5 Pin 16A, 230V, 50 Hz |
| 694 | Piano Type Socket 5 Pin 6A, 230V, 50 Hz |
| 695 | Porcelain Connector 2 Way 16 Amps |
| 696 | Power Contactor 4 No+1NC, 16 Amps |
| 697 | Starter For Tube light 40W, 230V, 50Hz |
| 698 | Teak Wood Batten ½\" |
| 699 | Teak Wood Batten ¾\" |
| 700 | Teak Wood Batten 1\" |
| 701 | Timer ET-100, 440 V, L&T make |
| 702 | Tube Light 40W, 230V, 50Hz |
| 703 | Tumbler Socket (3 Pin) 16 amps, 250V, 50Hz |
| 704 | Tumbler Socket (3 Pin) 5 amps, 250V, 50Hz |
| 705 | Tumbler Switch (One Way) 16A, 250V, 50Hz |
| 706 | Tumbler Switch (One Way) 6A, 250V, 50Hz |
| 707 | Tumbler Switch (Two Way) 6A, 250V, 50Hz |
| 708 | Wooden Box 4\" x 4\" |
| 709 | Wooden Box 4\" x 6\" |
| 710 | Wooden Box 8\" x 10\" |
| 711 | Wooden Box 8\" x 12\" |
| 712 | Wooden Box 8\" x 6\" |
| 713 | Wooden Round Block 3½\" |
| 714 | Wooden Screw 12 mm x 6 mm |
| 715 | Wooden Screw 18 mm x 6 mm |
| 716 | Wooden Screw 25 mm x 7 mm |
| 717 | Wooden Screw 35 mm x 8 mm |
| 718 | LED tube set – 230V, 50Hz, 40W |
