Tender For Construction Of Anganwadi Building At Keelanmarainadu Village And Panchayat
Tender Value
13.57 Lakhs
Estimated cost
Bid Submission
26 Oct 2022
0 days left
EMD
13570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vembakottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Building At Keelanmarainadu Village And Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Anganwadi Building at Keelanmarainadu village and Panchayat |
| 2 | EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. (Hard Soil) |
| 3 | Depth 0.0 - 0.30m |
| 4 | Depth 0.30 - 0.60m |
| 5 | Above 0.60m |
| 6 | Collection and supply of gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for fillingetc.complete, |
| 7 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete |
| 8 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. Rate for 10m3 |
| 9 | Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4\"x41/4\"x21/4\" for the following including curing etc., complete complying with standard specifications. Rate for 10m3 |
| 10 | Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing |
| 11 | Supplying and erecting centeringshuttering includingnecessary supportsforplane |
| 12 | Column |
| 13 | Grade Beam |
| 14 | Plinth Beam |
| 15 | Above Plinth |
| 16 | Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete |
| 17 | Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per Sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. (The ceramic tiles should be got approved from the Departmental officers before execution). |
| 18 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution. |
| 19 | Weathering Course with brick jelly lime concrete to 0.075m thick and Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with w |
| 20 | Plastering with cement mortar 1:5 mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc |
| 21 | Plastering with cement mortar 1:3 mixto 10 mm thick including all cost and conveyance of all materials to site and all labour charges etc complete |
| 22 | Exterior Emulsion painting two coats with best approved quality and colourpaint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 23 | Oil bound Distempering painting with two coats, Using Oil bound Distemper including cost and conveyance all materials andscaffolding charges etc., complete complying with standard specifications as directed by the departmental officers. Rate for 10m2. |
| 24 | Supplyingof steel doors, windows, ventilators etc., withbest approved best qualityetc., complete complying with standard specifications and as directed by the departmental officers. |
| 25 | Door D 0.75 x 1.8 |
| 26 | Door D1 1.0 x 2.1 |
| 27 | Door D2 1.1 x 2.1 |
| 28 | Window W 1.2 x 1.3 |
| 29 | Jolly J 0.6 x 0.45 |
| 30 | Baby friendly Toilet |
| 31 | EWC |
| 32 | Ventilator V 0.60 x 0.45 |
| 33 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 34 | Labour Charges for Fixing the Doors inculding all Charges etc.. |
| 35 | Labour Charges for Fixing theSteel Window inculding all Charges etc.. |
| 36 | Supplying & fixingwith cuddapah slabs 20-30mm thick for cup board including all cost and conveyance and all labour charges etc .comp. |
| 37 | Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 60mm and compacted over a thin bedding sand layer of 25 mm thickness and joints shall be filled by fine sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 andTechnical specification clause 1504. |
| 38 | Provision For Rain Water Harvesting Structure including all Charges Etc… |
| 39 | Provision For Soakpit Arrangement including all Charges Etc… |
| 40 | Provision for water supply arrangement (Sub Estimate) |
| 41 | S&D Of 500 litrs Capacity Sintex Tank |
| 42 | 25 mm UPVC pipes |
| 43 | Tap Point (Nalli, Bend, Coupling including all Charges) |
| 44 | Electrification Arrangement |
| 45 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)(SD-22) |
| 46 | Supply and fixing of single box type 4\"40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting(SD-88) |
| 47 | Supply and fixing of fancy glass shade and 11W CFL for BH point (SD-80) |
| 48 | Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL(SD-83) |
| 49 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)(SD-22) |
| 50 | Supply and fixing of 1200mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\")(SD-110) |
| 51 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) (SD-036) |
| 52 | Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains(SD-64) |
| 53 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD-125) |
| 54 | Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only (SD-142) |
| 55 | Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains(SD-74) |
| 56 | Supply and laying of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD-223) |
| 57 | GST Amount for providing service to the above Government Contract Works {GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Oct 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender