Tender For Construction Of Public Distribution Centre At Kottaipatti Village And Panchayat
Tender Value
12.30 Lakhs
Estimated cost
Bid Submission
27 Oct 2022
0 days left
EMD
12300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srivilliputhur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Public Distribution Centre At Kottaipatti Village And Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of PDSBuilding at Kottaipatti Village and panchayat |
| 2 | EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed. (Hard Soil) |
| 3 | cess pool |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete |
| 5 | Collection and supply of gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for fillingetc.complete, |
| 6 | Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement including labour and all other incidental charges etc., complete |
| 7 | Reinforced Cement Concrete 1:1.5:3 using 20mm ISS HBG metal including cost and conveyance of all maerials to site and all labour charges for mixing concrete, placing, ramming, vibrating with mechanical vibrator, consolidation and Curing etc., complete as directed by departmental officers. |
| 8 | Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4\"x41/4\"x21/4\" for the following including curing etc., complete complying with standard specifications. Rate for 10m3 |
| 9 | Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing |
| 10 | Supplying and erecting centeringshuttering includingnecessary supportsforplane |
| 11 | Column |
| 12 | Grade Beam |
| 13 | Above Plinth |
| 14 | Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete |
| 15 | Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per Sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. (The ceramic tiles should be got approved from the Departmental officers before execution). |
| 16 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution. |
| 17 | Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same mortar mixed with water proofing compoud etc., complete |
| 18 | Plastering with cement mortar 1:5 mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc |
| 19 | Plastering with cement mortar 1:3 mixto 10 mm thick including all cost and conveyance of all materials to site and all labour charges etc complete |
| 20 | Exterior Emulsion painting two coats with best approved quality and colourpaint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 21 | Oil bound Distempering painting with two coats, Using Oil bound Distemper including cost and conveyance all materials andscaffolding charges etc., complete complying with standard specifications as directed by the departmental officers. Rate for 10m2. |
| 22 | Supplying & fixing Water Closet, Wash Basin (Indian Made and Western) of Standard approved Quality including all Sanitary fixtures, P or S Trap, Flushing Tank and all other incidental charges etc., complete |
| 23 | Indian Water Closet |
| 24 | Wash Basin |
| 25 | Supplying & fixingwith Cuddapah slabs 20-30mm thick for Cub boards & Shelfs at required location and pointed with cement mortar 1:3 including all incidental charges etc., complete |
| 26 | Fabrication and supply of Mild Steel Door, Window and Rolling Shutters Ventilator any size with single leaf outer frame made o M.S anglefor horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. |
| 27 | Door D1 [1.00mx2.10m] |
| 28 | Door D2 [0.90mx2.10m] |
| 29 | Toilet Door TD[0.90mx1.80m] |
| 30 | Rolling Shutter RS1 [1.80mx2.40m] |
| 31 | Rolling Shutter RS2 [2.10mx2.40m] |
| 32 | Window W [1.00mx1.30m] |
| 33 | Ventilator V [0.90mx0.60m] |
| 34 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 35 | Labour Charges for Fixing the Doors inculding all Charges etc.. |
| 36 | Labour Charges for Fixing theSteel Window inculding all Charges etc.. |
| 37 | PROVIDING WATER SUPPLY AND SANITARY DISPOSAL ARRANGEMENTS(Sub Estimate) |
| 38 | Earthwork excavation in all classes of Soils and Subsoils except hard rock requiring blasting for laying of Pipes with the standard trench width as per Standard specifications - TWAD board specifications from Source to Storage tank |
| 39 | 32mm dia 6 Kgsc Pipe - Supply |
| 40 | HDPE - PVC Tank 1000 Litres |
| 41 | Conveying the PVC pipes and specials to trench, lowering into the trenches, laying to proper grade and alignment, joining with PVC coupler and specials fixing with neat cement paste and testing to the required pressure as per IS standards including conveyance of water from 1KM lead for filling during testing (Laying and Joining) etc., complete - Refilling of Excavated earth after testing |
| 42 | Electrification Arrangement |
| 43 | Wiring with 2 X 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / Fan point (For electronic Regulator) SD 22 |
| 44 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick Hylum sheet cover for 5 Amp pin Non interlocking CS plug with continous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for Concealed PVC Plug point SD 36 |
| 45 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for Service Connection Mains SD 64 |
| 46 | Supply and run of 2x1.50 sq.mm (22/0.30) PVC insulated SC unsheathed Copper Conductor of 1100 V grade in 25mm dia GI Pipe (Class B) suitably bent at both ends with necessary angle iron upright and end supports for Mains SD 71 |
| 47 | Supply and fixing of Single box type 4\"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88 |
| 48 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb - SD 83 etc., complete |
| 49 | Supply and fixing of 1200 mm ( 48\") AC Ceiling Fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 |
| 50 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD-125) |
| 51 | GST Amount for providing service to the above Government Contract Works {GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Oct 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender