Tender For Piped Water Supply Scheme At- Chinchwali Gohe Tal- Khalapur Dist- Raigad (Jal Jeevan Mission) 2Nd Call
Tender Value
55.27 Lakhs
Estimated cost
Bid Submission
25 Oct 2022
0 days left
EMD
55271
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khalapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Piped Water Supply Scheme At- Chinchwali Gohe Tal- Khalapur Dist- Raigad ( Jal Jeevan Mission ) 2Nd Call
BOQ
| Sl. No. | Item Description |
| 1 | Sub Estimate No. 1 :- Pumping MachineryItem No. 1 :-Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.3.00 BHP Pumpset |
| 2 | Item No. 2 :- Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed. 3 core 10 sq mm |
| 3 | Item no 3 Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 4 | Item No. 4 :- Providing , installing & commissioning main control pannel boardincluding V.meter & A. meter of suitable range single phase prevention 8 Nos. of phase indicater lamps with colour glass of 230 V rotary switch over load capacitor suitable for 1.00HP and 12.50BHP pump etc.complete. |
| 5 | Item No. 5 :- Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. Pressure gauge (100 mm dia) |
| 6 | Item No. 6 :- Providing tools for pumping.etc complete |
| 7 | Item No. 7 :- Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) |
| 8 | Item No. 8 :- Providing pipe type earthing with 40 mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 9 | Sub Estimate No. 2 :- Switch RoomItem No. 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) |
| 10 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) |
| 11 | Item No. 3 :- Providing and laying in situ cement concrete in M – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. |
| 12 | Item No. 4 :- Providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. |
| 13 | Item No. 5 :- Providing second class Burnt Br ick masonry wi th convent ional/ I.S.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. Complete |
| 14 | Item No. 6 :-Providing and casiting in situ CC of trap /granite/quartzite/gneiss metal ofapprovedquality for R CCwork asper detailed drawing anddesigns or as diredcted by Engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withCM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. Slabs b) In RCC M-200 |
| 15 | Item No. 7 :-Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. |
| 16 | Item No. 8 :- Providing and laying in situ Cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete. P.C.C. 1:2:4 |
| 17 | Item No. 9 :-Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compact ion, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. With Natural Sand |
| 18 | Item No. 10 :-Providing and fixing frame wi th / wi thout ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete |
| 19 | Item No. 11 :-Providing and fixing Count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete |
| 20 | Item No. 12 :- Providing and fixing Count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete |
| 21 | Item No. 13 :- Providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. |
| 22 | Item No 14 Providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. |
| 23 | Item No. 15 :- Providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete |
| 24 | Item No.16 :- Providing and fixing in position steel bar reinforcement of various diamenters for RCC piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) |
| 25 | Sub Estimate No. 3 :- Rising Main Item No. 1 :- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984/14151/12786/13488 with nesessary jointing material like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading/unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form 75 mm Dia HDPE Pipe 8 Kg/sqcm |
| 26 | Item No. 2 :- Providing G.I./P.V.C./HDPE Specials as per standard specifications & direction of incharge Engineer. |
| 27 | Item No. 3 :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves 65 mm Dia. |
| 28 | Item No. 4 :- Providing & supplying ISI mark CI D/F reflux valve (Non-return valve) of following dia including all taxes (central and local), railway freight, inspection charges unloading from railway wagon, loading into truck, transportation upto department stores/site, unloading, stacking etc. complete.reflux valves as per I.S.5312 part I (1984) Reflux valves 65 mm Dia. |
| 29 | Item No. 5 :- Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991. Sluice valves 80 mm Dia. for Washout |
| 30 | Item No. 6 :- ProvidingandsupplyingAirvalvesasperIS-10845and MJP’s standard specifications of approved mark and quality offollowingdiametersincludingalltaxes (Central andlocal),railwayfright,inspectionchargesunloading fromrailwaywagons,loadingintotruck,transportation upto departmental stores/ site, unloading and stacking etc. complete.Air valves 15 mm Dia. |
| 31 | Item No. 7 :- Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (EARTH SOIL) |
| 32 | Item No. 8 :- Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (HARD MURRUM) |
| 33 | Item No. 9 :- Excavation for foundation/ pipe trenches in soft rock and oldcementandlimemasonryfoundationasphaltroad including removing the excavated material upto a distance of50Mbeyond areaandliftsasbelow,stackingas directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Soft Rock) |
| 34 | Item No. 10 :- Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. |
| 35 | Item No. 11 :- Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II75 mm Dia. HDPE Pipe 8 Kg/sqcm |
| 36 | Item No. 12 :- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including nut bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Sluice valves 65 mm Dia. |
| 37 | Item No. 13 :- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)Reflux valves 65 mm Dia. |
| 38 | Item No. 14 :- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) Sluice valves 65 mm Dia. for Washout |
| 39 | Item No. 15 :- Lowering, Layingand fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete.Air valves 15 mm Dia. |
| 40 | Item No. 16 :- Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providingPCCblockofM-150concrete150mmthick aroundtheairvalveteeincludingencasingofvertical shaft in PCC M-150 as shown in type design together with providingandmakingflangedjointswhereverrequired and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)upto 150 mm on Murum & harder strata |
| 41 | Item No. 17 :- ProvidingandlayinginsitufollowinggradesofC.C.of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete.a) 1:2:4 (M-150) grade for Trust blocks b) 1:2:4 (M-150) grade for encasing |
| 42 | Item No. 18 :- Providing and constructing B.B.masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, including excavation, B.B.masonry in C.M. 1:5 proportion 12mm thickcementplasterincm1:4proportiononbothsides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or cm thick slab etc. complete as directed by Engineer-in-charge.Size 0.90 x 0.60 x 1.20 |
| 43 | Item No. 19 :- Refilling the trenches with available excavated stuff with soft materialfirst over pipeline andthen hardmaterial in 15 cm layers with all leadsand lifts including consolidation, surcharging, etc. complete |
| 44 | Item No. 20 :- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 90 mm Dia. HDPE Pipe 8 Kg/sqcm |
| 45 | Item No 21 Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice valves 65 mm Dia. |
| 46 | Reflux valves 65 mm Dia. |
| 47 | Sluice valves 65 mm Dia. For washout |
| 48 | Sub Estimate No. 4 :- R.C.C. ESR @ Chinchole Gohe Item No. 1:- Designing (aesthetically),and constructingRCCelevatedservice reservoirsoffollowingcapacitywith RCCstagingconsistingofcolumns, internalandexternalbracingsspaced verticallynotmore than4.5 metres centre to centre for ESR having capacityupto500cumandnotmore than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compoundtotheinsidefaceofthe containerincludingrefillingdisposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypassarrangements asper departmental design, providing andfixingaccessoriessuchasM.S. ladder, C.I. manhole frame and covers, waterlevelindicators,lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair casefromgroundleveltorooflevel, M.S. grill gate of 2 M height with locking arrangementofapproveddesign,B.B. masonry chambers for all valves, ventilatingshafts,providingand applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti- termite treatment for underground parts ofthestructureandgivingsatisfactory watertightnesstestasperI.S.code. The job to include painting the name of theschemeandotherdetailsonthe reservoir as per the directions of Engineer-in-Charge. Cost for 18000 lit and 12.00 m stagging height @ Dhakte Vengaon |
| 49 | Item No. 2 :- Providing D.I.pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GOI & GOM in all respect includingThird party inspection charges of TPI Agency approved by MJP includingTransitinsurance, Railway Freight,Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading,stacking etc.completed as directed by Engineer incharges (IS8329/2000 for pipes and IS 158/1969 and IS12820/1989 or latest edition / revision with amendments for Rubber Gaskets.Inlet, outlet, Overflow D.I. Pipe100 mm |
| 50 | Item No. 3 :- Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle capsexcluding GST levied by Gol and GoM in all respect , transportation etc complete.Sluice Valve 100 mm Dia ( PN -1) |
| 51 | Sub Estimate No. 5 :- SAND PRESSURE FILTER Item No 1-Readymade Sand Pressure FilterWith CarbonDouble Vessles , including cost of vessle all material ,Labour transportation, Filter media,erection,Chlorination etc. |
| 52 | Sub Estimate No. 6 :-Distribution System Item No. 1 :- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 63 mm Dia HDPE Pipe 6 Kg/sqcm |
| 53 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 54 | 90 mm Dia HDPE Pipe6 Kg/sqcm |
| 55 | Item No. 2 :- Providing G.I./P.V.C./HDPE Specials as per standard specifications & direction of incharge Engineer. |
| 56 | Item No. 3 :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves 50 mm Dia |
| 57 | Sluice valves 65 mm Dia |
| 58 | Sluice valves 80 mm Dia |
| 59 | Item No. 4 :- Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Reflux valves 50 mm Dia |
| 60 | Reflux valves 65 mm Dia |
| 61 | Item No. 5 :- Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves 50 mm Dia for Washout |
| 62 | Sluice valves 65mm Dia for Washout |
| 63 | Item No. 6 :- Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air Valve 15 mm Dia |
| 64 | Item No. 7 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259)(Earth Soils) |
| 65 | Item No. 8 :- Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (BdA-3/259) (Hard Murrum) |
| 66 | Item No. 9 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)(Soft Rock) |
| 67 | Item No. 11 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) |
| 68 | Item No. 12 :- Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63 mm Dia HDPE Pipe 6 Kg/sqcm |
| 69 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 70 | 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 71 | Item No. 13 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice Valve 50 mm Dia |
| 72 | Sluice Valve 65 mm Dia |
| 73 | Item No. 14 :- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves) Reflux valves 50 mm Dia |
| 74 | Reflux Valve 65 mm Dia |
| 75 | Item No. 15 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Sluice valves 50mm Dia for Washout |
| 76 | Sluice valves 65 mm Dia for Washout |
| 77 | Item No. 16 :- Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves) Air valves 20 mm Dia |
| 78 | Item No. 17 :- Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) Foundation on Murum and Harder Strate.upto 150mm |
| 79 | Item No. 18 :- Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) a) 1:2:4 (M-150) grade for Thrust Blocksb) 1:2:4 (M-150) grade for encasing |
| 80 | Item No. 19 :- Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. |
| 81 | Item No. 20 :- Refillingthetrencheswithavailableexcavatedstuffwith soft materialfirst over pipeline andthen hardmaterial in 15cmlayerswithallleadsandliftsincluding consolidation, surcharging, etc. complete |
| 82 | Item No. 21 :- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 65 mm Dia HDPE Pipe 6 Kg/sqcm |
| 83 | 75 mm Dia HDPE Pipe 6 Kg/sqcm |
| 84 | 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 85 | Item No. 22 :- Providingandfixingboarddisplayinginformation, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangularshapeof1.20mx0.90msize made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stoveenamelonbacksideandborder/messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65mlongpaintedwithalternateblackandwhite bandsof25cmwidthincludingallfixturesetc.and fixing the boards in 1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge MORTH 801 |
| 86 | Sub Estimate No.7 :- Trial Run, Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.Note: Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department. |
| 87 | Add 12% GST |
AI Tender Summary
Tender Timeline
Oct 17, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender