Tender For Mgnregs-Material Supply
Tender Overview
Project Description
Mgnregs-Material Supply Material Supply Goods And Services , Cement , M.Sand , Fine Sand , Aggregates ( Metal ) ( 40 Mm ) , Aggregates ( Metal 20 Mm ) , Aggregates ( Metal 10 Mm ) , Cement Solid Block ( 30X20x20cm ) , Cement Solid Block ( 30X20x15 Cm ) , Cement Solid Block ( 40X20x20 Cm ) , Dry Rubble , Steel , Quarry Muck , Concrete Mixer , Vibrator , Laterite Stone , Hollow Block ( 40X20x15 Cm ) , Centering & Shuttering, Founadation, Footing Etc , Centering & Shuttering, Wall &Plinth Etc , Centering & Shuttering, Roof Landing Etc , Centering & Shuttering, Lintel Beam Etc , Centering & Shuttering, Column Piller Etc , Polythene Shade Net , Polybag , Gi Pipe ( 40 Mm Nom.Dia ) , Gi Pipe ( 40 Mm Nom.Dia ) , Welding , Wire Nails , Red Oxide Zinc Chromate Primer , Galvanised Wire Mesh ( Nom.Dia 0.63Mm ) , Gi Chiken Mesh ( 24 Guage ) , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Flats Exceeding 10 Mm In Thickness , Mild Steel Sheets For Tanks , Iron Pintels Including Weldded Pin , Mild Steel Sheets With Bolts And Nuts To Rest On Pintels , Mild Steel Hooks , 20 Mm Dia Holding Down Bolts , Stainless Steelhollow Section Round / Square Tubes ( Grade - 304 ) , Ms Tube , Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) , Galvanised Steel J Or L Hooks 8 Mm Dia , Bitumen Washer , G.I. Plain Washer Thick , Precoated Galvanised Plain Sheet ( 0.50Mm Thick ) , Precoated Aluminium Trafford Sheet ( 0.450Mm Thick ) , Ceramic Glazed Tiles Ist Quality- ( Minimum 5 Mm Thick ) , Ceramic Glazed Tiles Ist Quality ( 300 X 300 Mm ) , Ceramic Glazed Tiles Ist Quality -300 X 300 Mm , Factory Made Door Frame-50X47 Mm Thick 5 Mm , Factory Made Solid Panel Pvc Door Shutter ( 35 Mm Thick ) , Powder Coated M.S. Butt Hinges ( 100 Mm X58 Mm X 1.9 Mm ) , Bright Finished Or Black Enameled Mild Steel Screws- 40 Mm , Vitreous China Orrisa Type W.C. -Pan Size 580 Mm , Vitreous China Pedestal Type Wate Closet , Black Plastic Seat ( Soild ) With Lid C.P.Brass Hinges And Rubber Buffers , Flushing Cistern P.V.C. ( 10 Lts Capacity ) , S.C.I. Trap With Vent Heel ( 100 Mm ) , Vitreous China Flat Back Wash Basin ( 630X450 Mm ) , C.P.Brass Tap ( 15 Mm ) , C.P. Brass Waste ( 32 Mm ) , C.I. Bracket For Wash Basin And Sinks , Stainless Steel Kitchen Sink - Without Drain Board ( 470X420 Mm Bowl Depth 178 Mm ) , Pvc Pipe 15 Mm Outer Dia ( 10Kgf / Cm2 ) , Making Chases In Walls Including Making Good And Finishing With Matching Surface After Housing G.Il Pipe Etc. ( Up To 7.5X7.5 Cm ) , Pvc Pipe 20 Mm Outer Dia ( 10 Kfg / Cm2 ) , Pvc Pipe 25 Mm Outer Dia . 12 Kgf / Cm2 , Pvc Pipe 32 Mm Outer Dia. ( 10Kgf / Cm2 ) , Pvc Pipe 75 Mm Outer Dia ( 6Kgf / Cm2 ) , Pvc Pipe 110 Mm Outer Dia. ( 4Kgf / Cm2 ) , Pvc Vent Cowl ( 75 Mm Dia ) , Pvc Socket / Coupling ( 75 Mm Dia ) , Pvc Door Elbow ( 110 Mm Dia ) , Pvc Bend ( 110 Mm Dia ) , Pvc Tee ( 110X110x110mm Dia ) , Pvc Socket / Coupling ( 110 Mm Dia ) , Pvc Reducer ( 110X75 Mm Dia ) , Brass Full Way Valve With C.I. Wheel ( Screwed End ) ( 25 Mm Dia ) , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chloride ( Cpvc ) Pipe25 Mm Outer Dia , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content ( Less Than 50 Gms / Litre ) , Water Proofing Cement Paint , Multi Surface Paint , Special Primer ( C.W ) , Black Japan , Metal Primer ( U.G. ) , Premium Acrylic Emulsion Of Interior Grade, Having Voc Content ( Less Than 50 Gm / Litre ) , Pvc Pipe 4Kgf / Cm2 ( Including Solvent, Clamp, Nails Etc ) ( 63 Mm Outerdia ) , Pvc Elbow ( 63 Mm ) , Bend ( 63 Mm ) , Door Elbow-63 Mm , Tee - 63X63x63 Mm , Soaket / Coupling -63 Mm , Vent Cowl-63 Mm , Door Tee -63 Mm , End Cap-63 Mm , Reducer-63X50 Mm , Pvc 45 Degree Elbow 63 Mm Dia-63 Mm , 4 Kgf / Cm2for Gutter Pipes-160 Mm , Gi Clamp For Gutter Pipes ( 160 Mm ) , Pvcstopper ( 160 Mm ) , Pvcdropper ( 160 Mm ) , Pvc Pipe Gutter Pipe 160 Mm Outer Dia ( 4 Kfg / Cm2 )
BOQ
| Sl. No. | Item Description |
| 1 | Cement |
| 2 | M.Sand |
| 3 | Fine sand |
| 4 | Aggregates(Metal)(40 mm) |
| 5 | Aggregates(Metal 20 mm) |
| 6 | Aggregates(Metal 10 mm) |
| 7 | Cement Solid block(30X20X20cm) |
| 8 | Cement Solid block(30x20x15 cm) |
| 9 | Cement Solid block(40x20x20 cm) |
| 10 | Dry rubble |
| 11 | Steel |
| 12 | Quarry muck |
| 13 | Concrete mixer |
| 14 | Vibrator |
| 15 | Laterite Stone |
| 16 | Hollow block(40x20x15 cm) |
| 17 | Centering & shuttering,Founadation,footing etc |
| 18 | Centering & shuttering,Wall &plinth etc |
| 19 | Centering & shuttering,Roof landing etc |
| 20 | Centering & shuttering,Lintel beam etc |
| 21 | Centering & shuttering,Column piller etc |
| 22 | Polythene shade net |
| 23 | Polybag |
| 24 | GI pipe(40 mm nom.dia) |
| 25 | GI pipe(40 mm nom.dia) |
| 26 | Welding |
| 27 | Wire Nails |
| 28 | Red oxide Zinc Chromate Primer |
| 29 | Galvanised wire mesh(nom.Dia 0.63mm) |
| 30 | GI chiken mesh(24 guage) |
| 31 | Structural steel such as tees, angles, channels and R.S. joists |
| 32 | Flats exceeding 10 mm in thickness |
| 33 | Mild steel sheets for tanks |
| 34 | Iron pintels including weldded pin |
| 35 | Mild steel sheets with bolts and nuts to rest on pintels |
| 36 | Mild steel hooks |
| 37 | 20 mm dia holding down bolts |
| 38 | Stainless steelhollow section round/square tubes(Grade - 304) |
| 39 | MS tube |
| 40 | Interlocking C.C. paver block(80 mm thick,M-30) |
| 41 | Galvanised steel J or L hooks 8 mm dia |
| 42 | Bitumen washer |
| 43 | G.I. Plain washer thick |
| 44 | Precoated galvanised plain sheet(0.50mm thick) |
| 45 | Precoated Aluminium Trafford sheet(0.450mm thick) |
| 46 | Ceramic Glazed Tiles Ist quality-(minimum 5 mm thick ) |
| 47 | Ceramic Glazed Tiles Ist quality (300 x 300 mm) |
| 48 | Ceramic Glazed Tiles Ist quality -300 x 300 mm |
| 49 | Factory made door frame-50x47 mm thick 5 mm |
| 50 | factory made solid panel PVC door shutter (35 mm thick) |
| 51 | Powder coated M.S. butt hinges( 100 mm X58 mm X 1.9 mm) |
| 52 | Bright finished or black enameled mild steel screws- 40 mm |
| 53 | Vitreous China orrisa type w.c. -pan size 580 mm |
| 54 | Vitreous china pedestal type wate closet |
| 55 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 56 | Flushing Cistern P.V.C. (10 lts capacity) |
| 57 | S.C.I. trap with vent heel(100 mm ) |
| 58 | Vitreous China flat back wash basin (630x450 mm) |
| 59 | C.P.brass tap(15 mm) |
| 60 | C.P. brass waste (32 mm) |
| 61 | C.I. bracket for wash basin and sinks |
| 62 | Stainless steel kitchen sink - without drain board (470x420 mm bowl depth 178 mm) |
| 63 | PVC pipe 15 mm outer dia (10kgf/cm2) |
| 64 | Making chases in walls including making good and finishing with matching surface after housing G.Il pipe etc.(up to 7.5x7.5 cm) |
| 65 | PVC pipe 20 mm outer dia (10 kfg/cm2) |
| 66 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
| 67 | PVC pipe 32 mm outer dia.(10Kgf/cm2) |
| 68 | PVC pipe 75 mm outer dia (6kgf/cm2) |
| 69 | PVC pipe 110 mm outer dia. (4kgf/cm2) |
| 70 | PVC vent cowl (75 mm dia) |
| 71 | PVC Socket/coupling (75 mm dia) |
| 72 | PVC door Elbow (110 mm dia) |
| 73 | PVC bend (110 mm dia) |
| 74 | PVC Tee (110x110x110mm dia) |
| 75 | PVC Socket/coupling (110 mm dia) |
| 76 | PVC Reducer (110x75 mm dia) |
| 77 | Brass full way valve with C.I. wheel (screwed end) (25 mm dia) |
| 78 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 79 | Chloride (CPVC) pipe 15 mm outer dia |
| 80 | Chloride (CPVC) pipe25 mm outer dia |
| 81 | Water thinnable cement primer for interior wall surface, having VOC content( less than 50 gms/litre) |
| 82 | water proofing cement paint |
| 83 | Multi surface paint |
| 84 | Special primer (C.W) |
| 85 | Black Japan |
| 86 | Metal Primer (U.G.) |
| 87 | Premium acrylic emulsion of interior grade, having VOC content (less than 50 gm/litre) |
| 88 | PVC pipe 4kgf/cm2(Including solvent,clamp,nails etc) (63 mm Outerdia) |
| 89 | PVC Elbow(63 mm) |
| 90 | Bend(63 mm) |
| 91 | Door elbow-63 mm |
| 92 | Tee - 63x63x63 mm |
| 93 | Soaket/Coupling -63 mm |
| 94 | Vent Cowl-63 mm |
| 95 | Door Tee -63 mm |
| 96 | End cap-63 mm |
| 97 | Reducer-63x50 mm |
| 98 | PVC 45 degree Elbow 63 mm dia-63 mm |
| 99 | 4 kgf/cm2for Gutter pipes-160 mm |
| 100 | GI Clamp for Gutter pipes(160 mm) |
| 101 | PVCStopper(160 mm) |
| 102 | PVCDropper(160 mm) |
| 103 | PVC pipe gutter pipe 160 mm outer dia(4 kfg/cm2) |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender