Tender For Increasing Capacity Of Tfs 16-25 Kva In Different Villages In Vijaypur Section Under Capital Head, bageshwar-Uttarakhand

Increasing Capacity Of Transformer 16 To 25 Kva In Different Villages Emanating From 33 / 11 Kv S / S Vijaypur , Block-Bageshwar Under Vijaypur Section Under Capital Head.-2 Ms Clamp For Gi Strip 35X6mm With N&B 3 Breasing Clamp Bottom For Sp-23 Pole With N&B 4 Lugs Aluminium 70 Sqmm 5 Nuts & Bolts 6 Lt Shackle Insulator 100X115mm With N&B 7 Lt Shackle Insulator Clmap For Sp-21 Pole With N&B 8 Lt Stay Insulator 9 Lt Stay Clamp For Sp-21 Pole With N&B 10 Work Items 11 Cartage Of Other Material ( Other Than Poles ) By Vehicle From Store Centre Almora To Nearest Construction Sitestore Including Loading & Unloading At Both Ends In Average Lead Distance 135 Km. 12 Head Load Cartage Of Small Material Including Loading & Unloading Upto 1 To 3 Km. 13 Laying, Spreading, Stringing And Sagging Of 11 Kv Line 3 Phase 4 Wire Of The Acsr Rabbit Conductor As Phase Wire With Gi Earth Wire Complete Including Fixing Of All Accessories In 03 Nos Conductors In Parallel With Binding And Jumphering As Per Profile And Sagging Chart. 14 Cartage Of 25 Kva Transformers From Store Center Almora To Constuction Site With Loading, Unloading At Both Points In Average Distance 135 Km. 15 Cartage Of Other Material ( Other Than Poles ) By Vehicle From Store Centre Almora To Nearest Construction Sitestore Including Loading & Unloading At Both Ends In Average Lead Distance 135 Km. 16 Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of 25 Kva Transformers Along With Loading / Unloading At Both Points Up To 1 To 3 Km. 17 Head Load Cartage Of Small Material Including Loading & Unloading Upto 1 To 3 Km. 18 Dismentalling Of 16 Kva Transformers From Double Pole / Plinth Including Opening Of All Connections, Circutits & Earthing Strip Etc. 19 Installation / Mounting Of New 25 Kva Transformer On Plinth Pole Structure And Fixing Of Channel / Angle Etc And Making All Connection Of Ht And Lt Side And Its Complete Commissioning. 20 Fabrication Of Ms Channel Angle Iron After Cutting In Required Size With Driling Of Holes Upto Good Finish For Top Channel Breasing And Special Type Bracket Etc As Per Resspo Schedule And Local Approved Drawing. 21 Chemical Earthing Of Distribution Transformer Including Digging Of Pit Of Size 2.5 Mtr Depth And Make Hole Of Size 150Mm. Placing Of Earthing Electrode ( To Be Supplied By Contractor As Per Drawing No A ) As Drawing B Connectiong The Same With Gi Strip Of Size 35X6 M As Per Drawing C For A Minimum Length 6 Mtr., Treatment Of Soil With Highly Conductive Substance As Per Is 30343 Complete In All Respects. Result Of Earthing Resistance To Be Recorded In Mb Before And After Installation Of Earthing. The Earth Resistance After Earthing Shlould Be Less Than 1 Ohm. 22 Laying And Errection Of Lt Pvc Cable Including Crimping Of Lugs 1X70, 120, 150 Sqmm ( Including All Cost Of Material ) 23 Back Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of Damagedtransformer 16 Kva Along With Loading / Unloading At Both Points Upto 0 To 1 Km. 24 Cartage Of 16 Kva Transformers From Construction Site To 33 / 11 Kv S / S Vijaypur With Loading, Unloading At Both Points In Average Distance 60 Km. 25 Cartage Of St Pole Sp-21 From Store Centre To Construction Site With Loading, Unloading At Both Ends And Proper Stacking Average Distance 135 Km. 26 Cartage Of Other Material ( Other Than Poles ) By Vehicle From Store Centre Almora To Nearest Construction Sitestore Including Loading & Unloading At Both Ends In Average Lead Distance 135 Km. 27 Head Load Cartage Of Sp-21 Poles From Road To Site Up To 1 To 3 Km. 28 Head Load Cartage Of Small Material Rates Are Per Km / Qntl Including Loading And Unloading Upto 1 To 3 Km. 29 Excavation Of Earth For Pole Pit Of Size 0.9X0.6X1 / 6 Of Full Length Of Pole For Errection Of Pole In All Types Of Soil Including Proper Dressing Of Sides And Ramming Of Bottom Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil And Directed Complete Work. 30 Errection Of Sp-21 Single Support Pole In Proper Level And Aligment Along With Fixing Of All Accessories, Like Top Channel & Clamps As Per Resspo Constuction Manual. 31 Grouting Of Pole In Size 0.45X0.45X1 / 9 Of The Support In Cc Ratio 1:4:8 ( 1 Cement: 4 Graded Stone 20 Mm Nominal Size : 8 Coarse Sand ) Block Including Cost Of Cement, Sand And Stone Ballast Back Filling Of Soil And Boulders In Pit And Ramming And Proper Alignment, Levelling As Per Resspo Manual. 32 Muffing Of Pole Size 0.45Cm X 0.60Cmradious With Cc 1:3:6 ( 1Cement: 3 Coarse Sand: 6 Graded Stone 10 Mm Nominal Size ) Block Size 45 Cm Height From Ground Level Including Cost Of Cement, Stone And Sand Etc. 33 Excavation Of Earth For Stay Pit Of Size 0.6X0.6X1.2 Mtr In All Type Of Soil Including Proper Dressing Of Sides Andramming Of Bottom Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Complete Work. 34 Fixing, Tightning And Nozzeling Of Lt Stay With Pole And Stay Rod On Required Tension As Per Drawing / Resspo Manual. 35 Grouting Of Stay In Size 0.6X0.6X0.3 In Cc Ration 1:4:8 ( 1Cement: 4Graded Stone 20Mm Nominal Size: 8Coarse Sand ) Block Inlcuding Cost Of Cement, Sand And Stone Ballast. Back Filling Of Soil And Boulders In Pit And Ramming And Proper Alignment, Levelling As Pre Resspo Manual. 36 Laying, Spreading, Stringing And Sagging Of Acsr Weasel Conductor ( 3 Phase 4 Wire Length ) As Phase Wire With Gi Earth Wire Complete With Binding And Jumphering As Pre Resspo Specification. 37 Laying, Spreading, Stringing And Sagging Of Acsr Weasel Conductor ( 1 Phase 2 Wire Length ) As Phase Wire With Gi Earth Wire Complete With Binding And Jumphering As Pre Resspo Specification. 38 Hammaring Of Ms Rod To Proper Depth And Connecting The Earth Electrode With The Help Of Gi Wire As Per Construction Manual. 39 Painting Of Poles Of Sp-21 With Angle And Channel And All Steel Part By One Coat Of Red Oxide Primer And Two Coats Of Alluminium Paint And Two Strip Of Fluorescent Red And White Paint 30 Cm Wide Upto 1.5 Mter From Ground Level.

INR 295 /-

INR 13000.0 /-

INR 3 Lakhs /-

Name of Work: Increasing capacity of transformes 16 to 25 KVA in different villages emanating from 33/11 KV S/S Vijaypur , Block-Bageshwar under Vijaypur Section under Capital Head.

Sl. No.	Item Description
1	Supply Items
2	MS Clamp for GI Strip 35x6mm with N&B
3	Breasing Clamp bottom for SP-23 pole with N&B
4	Lugs Aluminium 70 sqmm
5	Nuts & Bolts
6	LT Shackle Insulator 100x115mm with N&B
7	LT Shackle Insulator clmap for SP-21 pole with N&B
8	LT Stay Insulator
9	LT Stay Clamp for SP-21 pole with N&B
10	Work Items
11	Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction sitestore including loading & unloading at both ends in average lead distance 135 Km.
12	Head load cartage of small material including loading & unloading upto 1 to 3 Km.
13	Laying, spreading, stringing and sagging of 11 KV line 3 phase 4 wire of the ACSR Rabbit Conductor as phase wire with GI earth wire complete including fixing of all accessories in 03 nos conductors in parallel with binding and jumphering as per profile and sagging chart.
14	Cartage of 25 KVA transformers from store center Almora to constuction site with loading, unloading at both points in average distance 135 KM.
15	Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction sitestore including loading & unloading at both ends in average lead distance 135 Km.
16	Head load cartage/manual shifting/lifting with crane/hydra of 25 KVA transformers along with loading/unloading at both points up to 1 to 3 Km.
17	Head load cartage of small material including loading & unloading upto 1 to 3 Km.
18	Dismentalling of 16 KVA Transformers from double pole/plinth including opening of all connections, circutits & earthing strip etc.
19	Installation/mounting of new 25 KVA transformer on plinth pole structure and fixing of channel/angle etc and making all connection of HT and LT side and its complete commissioning.
20	Fabrication of MS Channel angle iron after cutting in required size with driling of holes upto good finish for top channel breasing and special type bracket etc as per RESSPO schedule and local approved drawing.
21	Chemical earthing of distribution transformer including digging of pit of size 2.5 mtr depth and make hole of size 150mm. Placing of earthing electrode (to be supplied by contractor as per drawing no A) as drawing B connectiong the same with GI strip of size 35x6 m as per drawing C for a minimum length 6 mtr., treatment of soil with highly conductive substance as per IS 30343 complete in all respects. Result of earthing resistance to be recorded in MB before and after installation of earthing. The earth resistance after earthing shlould be less than 1 Ohm.
22	Laying and errection of LT PVC Cable including crimping of lugs 1x70, 120, 150 Sqmm (including all cost of material)
23	Back head load cartage/ manual shifting/lifting with crane/hydra of damagedTransformer 16 KVA along with loading/unloading at both points upto 0 to 1 KM.
24	Cartage of 16 KVA Transformers from construction site to 33/11 KV S/S Vijaypur with loading, unloading at both points in average distance 60 Km.
25	Cartage of ST Pole SP-21 from store centre to construction site with loading, unloading at both ends and proper stacking average distance 135 Km.
26	Cartage of other material (other than poles) by vehicle from store centre Almora to nearest construction sitestore including loading & unloading at both ends in average lead distance 135 Km.
27	Head load cartage of SP-21 poles from road to site up to 1 to 3 KM.
28	Head load cartage of small material rates are per Km/Qntl including loading and unloading upto 1 to 3 Km.
29	Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for errection of pole in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil and directed complete work.
30	Errection of SP-21 single support pole in proper level and aligment along with fixing of all accessories, like top channel & clamps as per RESSPO constuction manual.
31	Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement: 4 graded stone 20 mm nominal size : 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESSPO manual.
32	Muffing of pole size 0.45cm x 0.60cmradious with CC 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.
33	Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides andramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.
34	Fixing, Tightning and nozzeling of LT stay with pole and stay rod on required tension as per drawing/ RESSPO manual.
35	Grouting of stay in size 0.6x0.6x0.3 in CC ration 1:4:8 (1cement: 4graded stone 20mm nominal size: 8coarse sand) block inlcuding cost of cement, sand and stone ballast. Back filling of soil and boulders in pit and ramming and proper alignment, levelling as pre RESSPO manual.
36	Laying, Spreading, Stringing and sagging of ACSR Weasel Conductor(3 phase 4 wire length) as phase wire with GI earth wire complete with binding and jumphering as pre RESSPO specification.
37	Laying, Spreading, Stringing and sagging of ACSR Weasel Conductor(1 phase 2 wire length) as phase wire with GI earth wire complete with binding and jumphering as pre RESSPO specification.
38	Hammaring of MS rod to proper depth and connecting the earth electrode with the help of GI wire as per construction manual.
39	Painting of poles of SP-21 with angle and channel and all steel part by one coat of red oxide primer and two coats of alluminium paint and two strip of fluorescent red and white paint 30 cm wide upto 1.5 mter from ground level.