Dismantling Works Carefully Dismantling / Disengaging The Following Items From Officers Lounge Area Located At 3Rd Floor Of Banks Office Building. A ) 115 / 150Mm Thick Masonry Wall With Both Side Finishes Of Approximate Overall Sizes 1235Cm X 320 Cm, 365Cm X 320 Cm, 180Cm X 320Cm & 80Cm X 225Cm B ) Wooden Doors With Shutters Of Approx. Overall Size 90Cm X 210Cm - 4 Nos ( Same Shall Be Stacked For Re-Use ) C ) Wooden Ventilators Of Approx. Size 90 Cm X 60 Cm - 3 Nos. D ) Ms Framed Glazed Windows Of Approx. Overall Size 1100Mm X 1200Mm - 14 Nos & 90Cm X 120Cm - 9 Nos Including Hold Fasts Etc And Making Good The Damages In The Wall........ For Full Details, Please Go Through The Tender Documents. 2 2 Providing Brick Masonry For Walls Providing And Constructing 115 / 230 Mm Thick Brick Masonry For Walls, Closing The Openings Etc., Using Best Quality Locally Available Bricks In Cm 1:4, In Correct Plumb, Line And Level, Providing Proper Key To The Adjoining Wall / Column / Flooring Etc., Placing 2 Nos 6Mm Dia Re Bars In Concrete Encasement At Every 4Th Course ( In Case Of 115Mm Thick Walls ) , Raking The Joints, Necessary Scaffolding, Curing, Cleaning, Removal Of Debris If Any Outside The Banks Premises Etc. All Complete As Directed By The Banks Engineer. 3 3 Rcc 1:2:4 For Lintel / Beams Etc Providing And Laying Rcc 1:2:4 For Lintel / Beams Etc Using Graded 20 Mm And Downsize Broken Blue Granite Stone Metal Coarse Aggregates Including Required Reinforcements As Directed, Necessary Centering, Shuttering, Scaffolding, Curing Etc. All Complete As Directed By The Banks Engineer. 4 4 Cement Plaster For New Walls Providing And Rendering Cement Plaster Of 20 Mm Or Above Average Thickness For New Walls Including Plastering In Patches , In C.M. 1:4 ( 01 Port Land Cement: 04 M. Sand ) ) True To Plumb And Line Over The Existing / New Walls To Match With The Adjoining Plastering And Finishing The Same Smoothly And Neatly Etc. The Rates Shall Include Necessary Curing Scaffolding, All Leads And Lifts, Removal Of Debris Etc., All Complete As Directed By The Bank?S Engineer 5 5 Back Plaster For Wall Dado Providing And Rendering Back Plaster For Wall Dado In C.M 1:4 ( Rough Finish ) : Preparing The Surface Of The Masonry Walls, Exposed As Per Item No. 1 Above And The Newly Constructed Walls, By Raking The Loose Mortar Joints, Watering And Thorough Cleaning Using Wire Brush / Broom, Providing And Applying Average 20 Mm Thick And Above Cement Plaster In Cm 1:4 By Using Approved Make Portland Cement And Approved Quality River Sand, True To Plumb, Level And Line As Backing For The Wall Dado To Be Fixed As Per Item No: 12 Below............ For Full Details, Please Go Through The Tender Documents. 6 6 Laying Concealed Plumbing Lines Providing, Cutting, Fixing, Testing And Commisioning Concealed Waterlines Of 20Mm Diameter Using C- Pvc Threaded Pipe Of Sdr 11 Including All The Necessary Specials Like Elbows, Tees, Couplings Etc. All The Concealed Lines Shall Be Properly Fastened To The Wall Using Gi Clamps @Maximum Spacing Of 450Mm. Rate Shall Be Inclusive Of Making Necessary Cutting And Chasing On The Walls To Receive The Plumbing Lines, Placing The Plumbing Line, Connecting The New Line To Existing Line, Properly Packing Using Cement Mortor Admixed With Waterproofing Chemicals, Wastages, Pressure Testing For Leakage Etc. Actual Linear Measurement Shall Be Reckoned For Payment Purpose 7 7 Laying Concealed Waste Lines Providing And Fixing Pvc Pipes Of 50Mm Nominal Diameters ( Minimum Test / Working Pressure 6 Kg / Sq.Cm ) Of Approved Quality And Make, Including All Fittings, Of The Same Manufacturer Of The Pipes Or Approved Equivalent And Fixing The Pipes With Clamps At 1 Mtr Spacing For Concealed / External Work Including Cutting Chases In The Wall / Floor For Concealing The Pipes, Connecting To Duct Line / Manhole, Including Fixing Pipes With Concrete Blocks Etc. Complete. The Rate Shall Inclusive Of Cutting, Jointing Of Pipes With Fittings And To The Existing Pvc Pipes In The Duct With Solvent Cement Of Approved Quality, And Making Good The Damages By Necessary Plastering, Including Testing Of Joints / Pipelines, Etc. For Leakage Etc. All Complete As Directed By The Banks Engineer. 8 8 Same As Item 7 But For 75 Mm Dia Pipes All Same As Item 7 Above But With Pipes Of 75Mm Diameter 9 9 Nahani Trap Providing, Fixing And Connecting Approved Quality And Make Pvc Nahani Trap Of 100X75mm Dia Outlet With A Minimum Water Seal Of 50Mm To The Waste Water Pipe Line. Rate Shall Be Inclusive Of Making Trenches Of Minimum Width 250Mm And Filling The Sump Using Concrete 1:1.5:3 Admixed With Water Proofing Chemical, Etc., Providing And Fixing Heavy Quality, 125Mm Size, Openable Type Ss Grating Etc. All Complete As Directed By The Banks Engineer. 10 10 Providing Screed Concrete Preparing The Surface Of The R.C.C Floor Slab / Sunken Area By Thorough Cleaning And Priming With Cement Slurry Admixed With Approved Make And Quality Water Proofing Compounds, Providing, Mixing, Laying, Spreading, Levelling And Manually Consolidating Using Hand Rammers P.C.C 1:3:6 For An Average Thickness Up To 100 Mm Using Approved Quality 20 Mm And Down Size Graded Broken Granite Stone Aggregates, Approved Quality River Sand, Portland Cement Of Approved Make And Water Proofing Compound, As Screed Layer In Flooring............. For Full Details, Please Go Through The Tender Documents. 11 11 Wall Dado Tile Work Providing And Fixing 1St Quality / Premium Quality Vitrified Tiles Of Size 600Mm X 600Mm ( Or Approved Nearest Available Size ) And Of Approved Shade And Make, For Wall Dado Over The Plastered And Bordered Surface As Per Item No: 05 With 6 Mm Average Thick Back Mortar Of C. M 1:3 ( 1 Cement : 3 M.Sand ) And Set With Cement Paste Spread Fully Over The Whole Back Area Of The Tile ( The Work Is Liable To Be Summarily Rejected If The Joint Is Found Susceptible To Hollowness ) And Also Including Pointing The Joints With Tile Grout Of Matching Shade, Curing, Etc. All Complete As Directed By The Bank?S Engineer........ For Full Details, Please Go Through The Tender Documents. 12 12 Vitrified Tile Flooring Preparation Of Surface By Thoroughly Hacking The Existing Flooring, Cleaning The Surface, Providing Floor Finish With Vitrified Tiles ( 800 Mm X 800 Mm Or Nearest Available Size ) , Of Approved Quality And Make ( Matching Shade Of Tiles Provided In Nearby Area To Be Got Approved By The Bank ) Over The Prepared Surface Of Floor Using Polymer Modified Quick Setting Adhesive Of Average 6Mm Thickness And The Adhesive Spread Fully Over The Whole Base Area Of The Tile ( If Any Undulations In The Floor, The Same Shall Be Levelled Using Polymer Modified Mortar ) For Proper Binding Of The Tiles And Pointing The Joints To Correct Lines And Levels With Epoxy Jointing Compound Of Matching Shade Etc........... For Full Details, Please Go Through The Tender Documents. 13 13 Wash Basin Counter Providing And Making Wash Basin Counter Of Approx. Overall Plan Size 3300 Mm X 650 Mm As Per The Sketch Enclosed And With Following Specifications A ) Constructing Necessary Support Pillars ( 3Nos ) , Raised Platform Etc. In Brick Masonry Using Best Quality Locally Available Bricks In Cm 1:4 And Finishing The Same With Cement Plaster Using Cm 1: 4. B ) Providing And Making Counter With 50 Mm Thick Rcc Slab ( 1: 1� :3 ) With Required Reinforcements And Finished Top & Front Fascia Etc ...... For Full Details, Please Go Through The Tender Documents. 14 14 False Ceiling Providing And Fixing Suspended, Stepped Type Gypsum Board Plain False Ceiling System And Pargola In Different Levels As Per The Specifications Of M / S Gyproc India Ltd Firmly Fixed On Gypsteel Ultra Framework Sections All As Per The Attached Sketch And As Detailed Below: I ) Perimeter Channels Of 20Mm X 28Mm X30mm All Along The Wall Fixed With The Help Of Nylon Sleeves And Screws @ 600Mm C / C. Ii ) Intermediate Channel 15Mm X45mm X 15Mm At A Spacing Of Not More Than 1200 Mm C / C. Iii ) Ceiling Angle 25Mmx10mmx 0.55 Mm Thick Fixed To Soffit With Gi Cleat And Steel Expansion Anchor Fasteners. Iv ) Ceiling Channel 80Mmx 26Mmx 51 X 0.5Mm @475Mmc / C............For Full Details, Please Go Through The Tender Documents. 15 15 Pop Cornice-100 Mm Size Providing And Fixing Stepped Pop Cornice Of Approx. 100Mm Size Of Approved Design / Pattern With Adhesive / Pop, At Junctions / Joints Of Wall And Ceiling In Perfect Lines And Levels, Etc. Including Applying Primer, Putty And Two Coats Of Interior Emulsion Paint, Finish Neatly Etc. All Complete As Directed By The Bank?S Engineer. 16 16 Pop Cornice-50 Mm Size All Same As Item 15 Above, But For Providing And Fixing Pop Cornice Of Size 50Mm Size 17 17 Granite Sill For Windows Providing And Fixing Minimum 18Mm Thick Mirror Polished Granite Slabs ( 150 To 200Mm Wide ) Of Jet-Black Shade For Sills Of Windows In Single Piece In True Level, Line Etc Fixed With 20Mm Thick Base Cement Mortar 1:4 In Full Width Of Wall. Rates Shall Include For Preparation Of Surface, Full Round Moulding Of Exposed Edges Of Granite And Polishing The Same To Mirror Finish Etc. All Complete As Directed By The Banks Engineer. 18 18 Powder Coated Aluminium Windows Providing, Fabricating And Fixing Powder Coated Aluminium Sliding Windows ( Two Shutters ) Of Approved Make And Quality With Glass Panels As Detailed Below. The Bottom Frame Is Of 61.85 X 31.75 X 1.50Mm Size With Minimum Weight Of 0.909Kg / Mtr, Sides And Top With Sections Having Minimum Weight Of 0.784Kg / Mtr Etc. The Sliding Shutter Sections Shall Be Of 40X18x1.55Mm With Minimum Weight Of 0.547Kg / Mtr Etc. And Interlocking Sections With Min. Weight Of 0.607Kg / Mtr. The Frame Work And Shutters Shall Be Powder Coated In Approved Shade With A Minimum Thickness Of 50 Micron. Sliding Shutters Are Provided With 4Mm Thick Plain Reflective Glass Fitted To The Frame With Epdm Gaskets Etc................ For Full Details, Please Go Through The Tender Documents. 19 19 Decorative Teak Wood Beading Providing And Fixing 62.5 X 25Mm Size Decorative Teak Wood Beading Of Approved Design Similar To That Available In Nearby Area Fixed On The Wall True To Line, Level Etc In Approved Methods Including Finishing The Same With Melamine Polish After Preparing The Surface, Applying Filler, Sealer Etc All Complete As Directed By The Banks Engineer. 20 20 Fibre Glass Reinforced Plastic Doors Providing And Fixing Fibre Glass Reinforced Plastic Doors With Frames Of Approved Make And Design With Following. The Door Frames Shall Be Three Legged Of Minimum Cross Section 75 Mm X 45 Mm Having Single Rebate Of Size 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Shutters Shall Be Of 30Mm Thick Manufactured Conforming To The Specifications As Per Is 14856 With Decorative Deisgn Work Approved By The Bank And Having Matt Finish. The Doors Shall Be Provided With Necessary Fiitings Of Ss Matt Finish, Hinges - 3Nos, Aldrop, Tower Bolts Etc All Complete As Directed By The Banks Engineer. 21 21 Decorative Partitions Around Wash Basin Area Providing And Erecting Decorative Partitions Around Wash Basin Area As Per The Attached Sketch And With Following Specifications. The Frame Work For Partition Shall Be Made With Anodized Aluminium Scetions 50Mm X 50Mm X 1.5Mm As Required But Not Grater Than 600Mm C / C. The Vertical And Horizontal Members Shall Be Joined Together Using 2 Numbers Of 50 Mm X 50 Mm X 40 Mm X 2 Mm Thick Anodised Aluminium / G.I Cleats For Each Junction, Fastened With 15 Mm X 3.5 Mm Self-Tapping G.I Screws. The Frame Work Fabricated As Above Shall Be Firmly Fixed To The Floor At Bottom And True Ceiling At Every Corner For Proper Fixity For Full Details, Please Go Through The Tender Documents. 22 22 Applying Emulsion Paint Preparation Of Surface, Providing And Applying 2 Coats Of Premium Quality Acrylic Interior Emulsion Paint Of Approved Make And Shade To False Ceiling Surfaces Including Cost And Conveyance Of All Materials To Site, Labour Charges, Hire And Labour For Scaffolding, Etc. Complete As Directed By The Banks Engineer. 23 23 Preparation Of Surface To Remove Existing Paint Preparation Of Surface By Scrapping, Sand Papering Etc To Remove The Existing Paints, Providing And Applying 2 Coats Of Premium Quality Acrylic Interior Emulsion Paint Of Approved Make And Shade After Applying 1 Coat Primer And One Coat Of Wall Putty And Sanding To Get Smooth Finish For Walls Including Cost And Conveyance Of All Materials To Site, Labour Charges, Hire And Labour For Scaffolding, Etc. All Complete As Directed By The Banks Engineer. 24 24 Rebate-Taking Away The Salvageable Items Rebate For Taking Away The Salvageable Items Removed And Stacked As Per Items 1 Above
