Tender For Supply Of Labour For Balance Work Of Khalihan Truss And Other Miscellanious Work Of Rajkiya Pashudhan Evam Krishi Prakshetra Bharari Jhansi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2022
0 days left
EMD
30500
Bank guarantee accepted
Document Fee
1300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bharari → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Supply Of Labour For Balance Work Of Khalihan Truss And Other Miscellaneous Work Of Rajkiya Pashudhan Evam Krishi Prakshetra Bharari Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Labour work |
| 2 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m² |
| 3 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 4 | S/F Jindal/Tata Duroshine 0.63mm Colour Coated sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m² |
| 5 | Dismenteling of Existing trusses with putting down and explore it |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 7 | Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5\") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work. |
| 8 | Supply & Filling of Moorum soil in plinth/under floorincluding Ramming and wateringComplete of work. |
| 9 | First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. |
| 10 | First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in Super str. including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour& but for wall of one brick (230mm) thick .add for extra labour. |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Slab Beam Column in M 20 |
| 12 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Matt finish Rectified flooring in toilet floor (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade) |
| 13 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.dado/skirting in toilet (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade_) |
| 14 | Providing cutting bending MS bar Reinforcement in RCC Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | 2 cm.(3|4\") thick cement plaster in 1:2 consisting of part yf cement and 2 parts of apporved coarse sand laidin panels. Finished with 3mm.(1|8\") floating, coat of neat cement or cement and marble dust in ratio 5:1 including supply of materials labour and T&P etc. required for proper completion of the work. |
| 16 | 15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth . |
| 17 | 12 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth . |
| 18 | Labour work with Material |
| 19 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. : 15 mm nominal bore ( ARK, Kohler ,L&k) |
| 20 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore (ARK, Kohler ,L&k) |
| 21 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing notless than 170 gms |
| 22 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Parryware, Hindware, Jaguar, Cera, Johnson pedder) |
| 23 | Providing and fixing C.P. Health faucet (spray Nozzle) of approved quality for European water closet conforming to IS:8931 a) 15 mm nominal bore |
| 24 | Aluminium door in toilet |
| 25 | Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside(Nerolac, Asian, Berger) |
| 26 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Two coat weather coat Apex/ultima(Nerolac, Asian, Berger) |
| 27 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.(Birla, J.K. Putty) |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 20 mm gate wall |
| 29 | G.I. 20mm nozzal |
| 30 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :20 mm dia nominal bore |
AI Tender Summary
Tender Timeline
Oct 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender