Tender For Sinking Of Submersible Pump In Front Of Hajrat Ali House, S/O- Abu Bakkar , Koilapathar
Tender Value
1.54 Lakhs
Estimated cost
Bid Submission
01 Nov 2022
0 days left
EMD
3090
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ratua → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sinking Of Submersible Pump In Front Of Hajrat Ali House, S / O- Abu Bakkar , Koilapathar
BOQ
| Sl. No. | Item Description |
| 1 | Labour for boring tubewell of required diameter by water jet system through any kind of soil including...in the connection.etca) 40 mm dia boring |
| 2 | b)80 mm dia boring |
| 3 | Supplying fitting fixing of steel cutter pice upto 450 mmlong with socketsa) 40 mm dia |
| 4 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications.a) 40 mm dia |
| 5 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and ….a) P.V.C rigid pipes (dia)40 mm |
| 6 | b) P.V.C rigid pipes (dia)80 mm |
| 7 | c) P.V.C rigid pipes (dia)32mm |
| 8 | e) ReducingSockets (40mmx80mm) |
| 9 | e)P.V.C rigid pipes (dia)25mm |
| 10 | Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) 32mm |
| 11 | 25 mm |
| 12 | f) Reducingelbow (32mmx25mm) |
| 13 | Washing and development tubewell with air compressor pump ….according to the direction of the E.I.C. |
| 14 | Packing the annular space between the outside of the tubewell pipes & strainers...labour and equipment complete. |
| 15 | Supply of G.I. plug..40 mm dia |
| 16 | Supplying fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg. per sq cm 25mm dia |
| 17 | Supply fitting &fixing 1HP Submersible pump with motorof 100 mm dia of approved make and brand (crompton) with panel box cable and all necessary fittings |
| 18 | Supplying fitting and fixing of core 2.5 mm 2 flat Copper Submersible cable( Make FINOLEX/HAVELL\"s) |
| 19 | Supply and delivery of M.S. Rest clamp complete Nut and bolts of 10 mm thick for 40 mm dia. Pipe |
| 20 | Supply of GI Bend, 40mm |
| 21 | Supply and delivary of 32 Amp. SPN Main switch( HAVELL\"s) |
| 22 | Supply and control panel made of 16 SWG M.S. sheet phosphate powder dust & Vermin proof consist of following (internal wing complete) |
| 23 | Installation of main switch & control panel including making electrical connection complete by supplying all requisite materials as per direction of E.I.C. |
| 24 | Earth work in excavation of foundation trenches or drains in all sorts of soil…………. including removing, spreading orstacking the spills within a lead of 75 mtr ……… as required complete |
| 25 | Earth work filling in foundation trenches or plinth with good earth in layer not exceeding 150mm…….. earth obtain from excavation of foundation footing |
| 26 | Single brick flat soling of picket jhama bricks ………. With powdered earth or local sand. |
| 27 | Ordinary Cement concrete (mix 1:3:6) with grabed stone chips (20mm normal size) excluding shuttering & reinforcement , if any in ground floor as per relevent IS Codes. C) Rajmahal |
| 28 | Ordinary cement concrete(1:1.5:3) 20mm size…….(a)Rajmahal variety |
| 29 | Hire labour charges for shuttering with centering & necessary staging up to 4 m using ………. After completation of works (A) 25mm to 30 mm thick wooden shuttering as per decision & direction of E.I.C. |
| 30 | Reinforcement for reinforced concrete work in all sorts of……….for works in foundation basement upto roof of G.F. /upto 4m.Tor /Mild steel |
| 31 | Cement plaster with sand cement morter (1:6)……. A) 20 mm thick plaster |
| 32 | B) 10 mm thick plaster |
| 33 | Neat cement punning about 1.5 mm th. In wall, dado |
| 34 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock ofapproved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm |
| 35 | Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) (ii) 560 mm dia. |
| 36 | Display Board |
| 37 | GST |
| 38 | Labour welfare cess |
AI Tender Summary
Tender Timeline
Oct 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender