Tender For Fabrication And Erection Of Piping And Structural Jobs In Mfl, Ttp And Pat During 2022 - 23
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Nov 2022
0 days left
EMD
4.46 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manali → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication And Erection Of Piping And Structural Jobs In Mfl, Ttp And Pat During 2022 - 23
BOQ
| Sl. No. | Item Description |
| 1 | FABRICATION& ERECTION AT MFL PREMISES INCLUDING GUSSETS, CLEATS,STIFFENERS, CONVEYOR DECK PLATES WITH PROVISION OF HOLES ETC WITH ALL NECCESSORY WELDING WITH M.S MATERIAL AND CONSUMABALES SUPPLIED BY MFL (RATE PER TONNE) |
| 2 | Fabrication upto 1000 kgs* |
| 3 | Erection upto 1000 kgs* |
| 4 | Fabrication above 1001 kgs to 5000 Kgs * |
| 5 | Erection above 1001 kgs. to 5000 kgs.* |
| 6 | Fabrication above 5000 kgs * |
| 7 | Erection above 5000 kgs. * |
| 8 | DISMANTLING-INCLUDES CUTTING OF BOLTS AND OTHER NECESSARY THINGS |
| 9 | Structurals – Rate per tonne |
| 10 | Gratings – Rate per sq.m |
| 11 | Hand rails – Rate per RM# |
| 12 | REMOVING & FIXING ONLY |
| 13 | Gratings – Rate per Sq.m. |
| 14 | Hand rails – Rate per RM(includes Top, Middle, Toe piece) # |
| 15 | Step Grill (i) 750mm |
| 16 | Step Grill (ii)980mm |
| 17 | Step Grill (iii) 1080mm |
| 18 | FIXING ONLY |
| 19 | Gratings – Rate per Sq.m. |
| 20 | Hand rails – Rate per RM (includes Top, Middle, Toe piece) # |
| 21 | Step Grill (i) 750mm |
| 22 | Step Grill (ii)980mm |
| 23 | Step Grill (iii) 1080mm |
| 24 | PIPES AND FITTINGS (Pipes upto Sch.40) |
| 25 | Erection of pipes – Carbon Steel |
| 26 | Erection of pipes – Stainless Steel |
| 27 | Welding– Carbon Steel |
| 28 | Welding – Stainless Steel |
| 29 | PIPES AND FITTINGS(Pipes of Sch.80) |
| 30 | Erection of pipes – Carbon Steel |
| 31 | Erection of pipes – Stainless Steel |
| 32 | Welding– CarbonSteel |
| 33 | Welding – Stainless Steel |
| 34 | PIPES AND FITTINGS(Pipes of Sch.40 – X-Ray quality welding) |
| 35 | Welding– Carbon Steel |
| 36 | Welding – Stainless Steel |
| 37 | PIPES AND FITTINGS (Pipes of Sch.80 – X-Ray quality welding) |
| 38 | Welding– Carbon Steel |
| 39 | Welding – Stainless Steel |
| 40 | PIPES AND FITTINGS(Pipes of Sch.160) |
| 41 | Erection of pipes – Carbon Steel |
| 42 | Erection of pipes – Stainless Steel |
| 43 | PIPES AND FITTINGS (Pipes of Sch.160 – X-Ray quality welding) |
| 44 | Welding– Carbon Steel |
| 45 | Welding – Stainless Steel |
| 46 | PIPES AND FITTINGS(Pipes of Sch.40 – X-Ray quality welding. Root TIG welding to be done) |
| 47 | Welding– Carbon Steel |
| 48 | Welding – Stainless Steel |
| 49 | PIPES AND FITTINGS(Pipes of Sch.80 – X-Ray quality welding. Root TIG welding to be done) |
| 50 | Welding– Carbon Steel |
| 51 | Welding – Stainless Steel |
| 52 | PIPES AND FITTINGS(Pipes of Sch.160 – X-Ray quality welding. Root TIG welding to be done) |
| 53 | Welding– Carbon Steel |
| 54 | Welding – Stainless Steel |
| 55 | FULL FILLET WELDING |
| 56 | For Plates only up to 8mm thk Carbon Steel |
| 57 | Slip Blind: |
| 58 | Upto 10mm thick |
| 59 | Above 10mm thick |
| 60 | Flanges without machining – upto 10mm thickness |
| 61 | Flanges without machining – above 10mm thickness |
| 62 | FITTINGS: |
| 63 | Mitre Elbow |
| 64 | Reducer (quote for higher dia) |
| 65 | Tee |
| 66 | Clamp (150 mm width) |
| 67 | Fabrication of Heat Bend |
| 68 | ½” Size |
| 69 | ¾” Size |
| 70 | Fabrication of Heat Bend |
| 71 | Erection of Valves (Flanged) (Not Applicable in Case of Piping renewal beyond 5mtrs of length) |
| 72 | Valves A (150 PSI rating) |
| 73 | Valves B (300 PSI rating) |
| 74 | Valves C (600 PSI rating) |
| 75 | Elevators : Top and Bottom Sprocket reconditioning |
| 76 | Product Elevator |
| 77 | Primary, Secondary, Urea and RMTE Elevators |
| 78 | Primary, Secondary, Urea and RMTE bucket chain shortening |
| 79 | Product Elevator chain shortening |
| 80 | Removing Buckets from Old Chains by Gas Cutting : |
| 81 | Product Elevator |
| 82 | Primary, Secondary, Urea and RMTE Elevators |
| 83 | Renewal of Loose bolts (bucket) |
| 84 | Bucket Assembling in Length of 10 Buckets |
| 85 | Product Elevator (Single Chain) |
| 86 | Primary, Secondary, Urea and RMTE Elevators (Double Chain) |
| 87 | Renewal of Buckets including bolts |
| 88 | Primary, Secondary, Urea and RMTE Elevators |
| 89 | Product Elevator |
| 90 | Antisway Assembly, fabrication & fixing at site for all elevators in A, B & C Trains inclusive of welding, dismantling,& opening and boxing up of doors. |
| 91 | Casing repairs all elevators, Fines Conveyor & SDF with 8mm Plate |
| 92 | Renewal of Top Hood (Dismantling, Fabrication and Erection at site) |
| 93 | Product Elevator with 8mm plate(D + F + E) |
| 94 | Primary, Secondary, Urea & RMTE Elevators with 8mm plate (D + F + E) |
| 95 | Fabrication and Fixing up of coupling guardat site |
| 96 | Product Elevator, Pumps & Conveyors |
| 97 | Primary, Secondary, Urea & RMTE Elevators |
| 98 | Renewal of Chain Guards |
| 99 | Product Elevator (D + F + E) |
| 100 | Primary, Secondary, Urea & RMTE Elevators (D + F + E) |
| 101 | O.S.P Guard (Mesh type) (D+F+E) |
| 102 | Renewal of Take-up Frame |
| 103 | Product Elevator |
| 104 | Primary, Secondary, Urea & RMTE Elevators |
| 105 | Changing Head Sprocket of Product Elevators including removal and re-fixing of top hood and drive chain guards by delinking the bucket chain. |
| 106 | Changing of head sprocket assembly of Primary, Secondary, Urea, RMTE Elevators including removal and re-fixing of top hood and drive chain guards by delinking the bucket chain. |
| 107 | To inspect Antisway including opening and boxing up of doors. |
| 108 | Screen Drag Feeder & Fines Conveyor |
| 109 | Reconditioning of Sprockets |
| 110 | Reconditioning of flights and repairs (Straightening, welding, etc.) |
| 111 | Converting brackets from fines to SDF type |
| 112 | Fabrication of modified SDF brackets |
| 113 | Take–up frame fabrication |
| 114 | Shortening of Fines conveyor and SDF flight chain |
| 115 | Guide Details |
| 116 | Drilling bolt holes and welding stiffeners |
| 117 | Fixing at Site |
| 118 | Removal of old guide rail |
| 119 | All of the above 3 jobs put together |
| 120 | Flight replacement |
| 121 | Bolts replacement |
| 122 | Bracket renewal |
| 123 | Renewal of Tensioning rod |
| 124 | Flight chain tensioning |
| 125 | Renewal of tail sprocket bearing |
| 126 | Fines conveyor / SDF head sprocket renewal including hood / doors removal and re-fixing. |
| 127 | Fines conveyor / SDF tail sprocket renewal including removing and re-fixing of hood / doors and tensioning the take up. |
| 128 | Wear Plate by Stitch welding |
| 129 | Fixing wear plate (by stitch welding) including removal of old one on the guide rail |
| 130 | Oversize Pulverizer (R/C of Flail Chain by Cutting & Welding) |
| 131 | Units of 5 Links |
| 132 | OSP rotor renewal |
| 133 | Diverter renewal |
| 134 | Flail chain diverter |
| 135 | Butterfly damper – renewal |
| 136 | Fab & Installation of Doors & Frames in all places 8mm / 6mm |
| 137 | Frame including welding$ |
| 138 | Door with handle and hinges |
| 139 | Dryer |
| 140 | Seal replacement |
| 141 | Knocker chain welding – renewal |
| 142 | Retension ring with stiffeners renewal |
| 143 | Coupling guard fab & installation with 8mm plate |
| 144 | Trunnion guard fab & installation with 8mm plate |
| 145 | Spiral flight renewal (D+F+E) including welding on both sides. |
| 146 | Lifting flight renewal (D+F+E) including welding on both sides. |
| 147 | Grizzly bar renewal (D+F+E) |
| 148 | Cooler |
| 149 | Seal Replacement |
| 150 | Retention ring renewal |
| 151 | Fabrication & installation of coupling guards – 8mm |
| 152 | Fab & installation of Trunnion roller guards at site |
| 153 | Conveyors |
| 154 | Fabrication of Gearbox and motor base and fixing the same |
| 155 | Renewal of CFC, Feeders & Filler transfer conveyor belts with renewal of roller, frames& drums |
| 156 | Renewal of Head drums / Gravity take up drum including bearings |
| 157 | Renewal of tail drum / snub drum including bearings |
| 158 | Conveyor tension take up renewal |
| 159 | Conveyor tensioning & off centre adjusting |
| 160 | Conveyor tail drum bearings & head drum free end bearing renewal |
| 161 | Snub drum bearing renewal |
| 162 | Conveyor head drum sprocket side bearing renewal |
| 163 | Troughingidler frame fabrication |
| 164 | Return Idler bracket fabrication & fixing |
| 165 | Self-aligning idler frame fabrication |
| 166 | Fabrication & fixing of ploughs |
| 167 | Fabrication & fixing of coupling guard |
| 168 | Fab & fixing of chain guard |
| 169 | Fab & fixing of skirt box complete |
| 170 | Head & tail pulley guard fab & fixing |
| 171 | Renewal of skirt rubber complete per conveyor |
| 172 | Renewal of troughing idler frame |
| 173 | Replacing of conveyor belt including renewal of all types of rollers, frames & drums, removing and re-fixing of deck plates, chain guard ,load cell etc. |
| 174 | For all conveyors (except the conveyors mentioned in the Sl No. 10, of Note in theBOQ) |
| 175 | Renewal of carrying rollers / return rollers |
| 176 | Renewal of bag guide pipe. |
| 177 | Fab & fixing of reverse troughing idler |
| 178 | 0-401 Conveyor (UREA) |
| 179 | 0 – 401 skirt rubber renewal including frame (for all lengths of rubber) |
| 180 | Dislocated Grizzly lifting and positioning including necessary dismantling, fabrication and erection of structures and removing & refixing of skirt rubber |
| 181 | Miscellaneous(Urea) |
| 182 | PT fan expansion bellow renewal including cutting & fixing of bolts. |
| 183 | PT fan cushy spring renewal |
| 184 | Fabrication & Fixing of Belt guard |
| 185 | Belt guard for pumps |
| 186 | Quench air fan belt guard (D+F+E) |
| 187 | Blunger |
| 188 | Blunger paddle hard facing at site |
| 189 | Blunger paddle changing at site |
| 190 | Screen Room |
| 191 | Vibrator spring renewal |
| 192 | Screen mesh renewal |
| 193 | Vibrator bolts renewal |
| 194 | I-Bracket renewal |
| 195 | Vibrator unit renewal in full |
| 196 | Vibrator motor renewal |
| 197 | Screen damper renewals |
| 198 | Renewal of Lines |
| 199 | Dismantling &re-fixing of slurry line |
| 200 | Dismantling &re-fixing of jump over lines |
| 201 | Renewalof acid unloading hose |
| 202 | Renewal of air hose |
| 203 | Renewal of acid line |
| 204 | Choke removing by flame heating |
| 205 | Flame heating for 1 hour |
| 206 | Flame heating above 1 hour |
| 207 | Clamp fab & arresting pipe line leak |
| 208 | Fans : Rigging & Fab works connected with rotor renewal including removal and re-fixing of quadrant, jack bolts welding if necessary decoupling & coupling or removal and re-fixing of V belts & guards |
| 209 | Dryer Fan |
| 210 | Fumes Fan |
| 211 | Primary Air Blower |
| 212 | Dust Fan & Cooler Fan |
| 213 | Quench Air Fan |
| 214 | Motor of Fans : Shifting of new and damaged motor from shop to plant & back and renewal of motor including decoupling and coupling or removal and re-fixing of V-Belts and guards |
| 215 | Dryer Fan Motor |
| 216 | Fumes Fan Motor |
| 217 | Primary Air Blower Motor |
| 218 | Dust Fan motor |
| 219 | Cooler Fan Motor |
| 220 | Quench Air fan motor |
| 221 | Miscellaneous |
| 222 | To renew headsprocket assembly by delinking bucket chain, including hood removal and re-fixing |
| 223 | To renew segment, in situ without disturbing the bucket chain including hood removal and re-fixing. |
| 224 | To renew segment bolts upto 4 nos. |
| 225 | To renew segment bolts above 4 nos. |
| 226 | To renew Primary & Sec Ele. Bkt chain link plate broken / shearing including takeup lifting |
| 227 | To change Elevator Bucket Chain (Feeding into the casing) |
| 228 | Primary, Secondary, RMTE & Urea Elevator chains |
| 229 | To renew product elevator bucket chains |
| 230 | To renew & weld elevator bottom spkt shaft end collar |
| 231 | To open and box up elevator antisway door |
| 232 | To re-fix bottom spkt of product elevator |
| 233 | To check up Fines/SDF loose/missing bolt (during short shutdown) |
| 234 | To check up and tack weld fines & SDF flight new chain. Also checkup brkt bolts (per length 10 feet) |
| 235 | To remove entangled/ hanged flights from SDF and Fines Conveyor /blunger |
| 236 | To fab & erect spring take up housing for SDF |
| 237 | To renew OSP flail chain in location |
| 238 | To make 5 flail chain for OSP from used chain |
| 239 | To fab and erect chute vib. Base with vib assembly |
| 240 | To renew chute vib |
| 241 | To replace Bin vib |
| 242 | To fabricate & erect chute vib. Guard |
| 243 | To fix chain with wedge for inspection doors |
| 244 | To fab & erect OSP door hinges out of 1” thick plate with supporting gussets |
| 245 | To repair dryer tyre supporting pad crack |
| 246 | To weld dryer tyre supporting end bar D+ F+E |
| 247 | To fix dryer knocker chain at shell(Joining two lengths) |
| 248 | To fab and weld dryer lifter flight gusset |
| 249 | To fab dryer knocker chain clamp from 1” dia rod & weld in either side |
| 250 | To fab and erect dryer grizzly bar from 1” thick plate with V notch (D+F+ E) |
| 251 | To repair dryer shell crack under the Girth Gear |
| 252 | To repair The crack through and through |
| 253 | To repair the crack if it is not through and through |
| 254 | Prod. Cooler& Dryer air seal (modified) rubber renewal |
| 255 | To remove and fix Conveyor drive chain guard |
| 256 | To remove and fix drum guards |
| 257 | To fabricate & erect guide roller bracket |
| 258 | To adjust of skirt box rubber |
| 259 | To erect belt con. External scrappers |
| 260 | To fabricate belt con. External scrappers |
| 261 | To repair BCC Slat chain |
| 262 | Tofab & erect Guide rail/wear plate |
| 263 | To assemble BCC slat chain with slats |
| 264 | To remove & fix gravity take upsupport cross channel / ISMB endless belt renewal |
| 265 | To remove & fix Feeders D/Chain guard |
| 266 | To reposition BCC Discharge Plate |
| 267 | To fab & erect bag guide plates (SS) |
| 268 | To reposition / alter diverter suitable to bags direction |
| 269 | To reposition through con. Discharge chutes. |
| 270 | To reposition of derailed carriage/ tripper |
| 271 | To fabricate replaceable bolt with base for dryer trunnion changing |
| 272 | To fabricate and fix jack bolts in Head drums and small gear boxes |
| 273 | To fix coupling guard – Conveyor, OSP etc., |
| 274 | To fab of tension brkt for screen mesh |
| 275 | To fab screen mesh center strip |
| 276 | To patch up screen mesh end |
| 277 | To fab screen mesh I bracket |
| 278 | To fab and erect Pan Feeder gate |
| 279 | To fab Pan Feeder `J’ hooks |
| 280 | To replace `J’ hooks with springs |
| 281 | To change diaphragm valve 50, 65, 80 & 100 mm |
| 282 | To change diaphragm valve 250 mm |
| 283 | To remove & fix blind flanges upto 1” after clearing the choke |
| 284 | To adjust con off center by providing weights at gravity take up |
| 285 | To box up man hole clean out door with gaskets in Dust & Scrubber system |
| 286 | To fab & erect cyclone poking pipes with cover along with chain upto 1-1/2” dia |
| 287 | To provide safety chains to chute vib. |
| 288 | To fab and erect Raw materialbins vortex plate |
| 289 | To fabricate and erect Trickle valve, casing (Complete) |
| 290 | Effluent tank : To fix Tank mesh frames and repair / replace old mesh/change with an clean out door and erect |
| 291 | To remove effluent tank mesh with frame assembly and fix after cleaning |
| 292 | To fix permanent magnet at pan feeder |
| 293 | To remove & fix choked ring headers, after cleaning (Complete) |
| 294 | To fabricate & erect surge bin SS Square chute for IBM |
| 295 | To replace Motors jack bolts for drive belts tensioning |
| 296 | To renew Fan Expansion joint rubber with clamp in NPK plant |
| 297 | To inspect Elevator Chain 6859/6856m by opening boot door per side of double strand chain. |
| 298 | To fabricate and weld handle |
| 299 | To fabricate and weld lock rod |
| 300 | To fix missing collar pin on Elevator chain |
| 301 | To replace 6859 Takeup assembly including bucket removal &re-fixing, delinking and linking of chain, take up block sleeve replacement, side door & take up frame removal and re-fixing. |
| 302 | Renewal of broken pin / link in 6859/6856M chain |
| 303 | Dryer tyre pad cutting and removal |
| 304 | Dryer new pad fixing & full welding with shell and end bar welding |
| 305 | Dryer/Product cooler air seal clamp removal &re-fixing |
| 306 | Dryer / Product cooler tyre pad end bar welding |
| 307 | Urea evaporator shell crack repair and welding |
| 308 | Girth Gear splice bolt replacement in product cooler and coating drum |
| 309 | Removal & replacing rubber shell in pan feeder |
| 310 | Worn out area metal filling in 6859/6856m/698A chain |
| 311 | 698A head and tail sprocket segment renewal (removal of old sprocket by delinking the chain) – one set of 3 nos. |
| 312 | Spiral plate / lifter flight full welding on both sides of dryer |
| 313 | Gravity take up unit lifting & positioning |
| 314 | Take up assy. lifting and positioning in 6859/6856M chain |
| 315 | Dryer bracket welding |
| 316 | Bolt cutting ½” to 1” |
| 317 | Bolt cutting above 1” |
| 318 | Dryer long stud removal and re-fixing. Tightening the nuts with link plate (2 nos.,) and short stud fixing (2 nos.) |
| 319 | FC/SDF head sprocket assy. renewal including hood or doors removing and re-fixing. |
| 320 | Conveyor belt reversing including removal of head/tail drum, frame, rollers, deck plate removal &re-fixing and off center adjusting |
| 321 | FC/SDF front/rear door removal and re-fixing |
| 322 | OSP/fan bearing inner race cutting |
| 323 | FC/SDF bracket bolt renewal |
| 324 | Man Power |
| 325 | Fabricator-Normal duty |
| 326 | Welder -Normal duty |
| 327 | Helper to Welder / Fabricator - Normal Duty |
| 328 | PAT jobs |
| 329 | Sump Pump Renewal/Removal and Re-fixing |
| 330 | Acid Transfer Pump Renewal/Removal and Re-fixing |
| 331 | Booster Pump Renewal/Removal and Re-fixing |
| 332 | 12 Inch dummy removal and Re-fixing |
| 333 | Upto 6 Inch dummy removal and Re-fixing |
| 334 | Concrete Slab removal or fixing job in dock line area |
| 335 | 12 Inch Spool Piece removal and Refixing |
| 336 | 6 Inch Spool Piece removal and Refixing |
| 337 | 12 inch Fig – 8 Blind removal and fixing |
| 338 | Underground dock line 12” pipe repair job including pipe renewal, shifting, pressure testing, welding and again shifting back and fixing and final pressure testing |
| 339 | Material loading and unloading at PAT |
| 340 | Underground 12” pipe area trench cleaning including hard soil, unwanted materials and refilling after pipe repair job |
| 341 | Upto 6 inch line choke cleaning, Pipe removal and re-fixing |
| 342 | Gasket renewal – 12 inch |
| 343 | Gasket renewal – upto 6 inch |
| 344 | FABRICATION : |
| 345 | Fabrication and erection charges for essentially Plate Items such as vessels, tanks, elevator casings, etc., predominantly with plates of any thickness. |
| 346 | Fabrication and erection charges of essentially structural items like towers, pipe racks, etc., predominantly involving larger sections of structural items. |
| 347 | Bending and rolling of plates (including transport) |
| 348 | Fabrication and erection charges of eccentric Cones, reducers etc. |
| 349 | Bending and rolling of angles, channels etc. (including transport) |
AI Tender Summary
Tender Timeline
Oct 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 15, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender