Tender For Repair And Renovation Of Chc Satgawan
Tender Value
20.25 Lakhs
Estimated cost
Bid Submission
27 Oct 2022
0 days left
EMD
41000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satgawan → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Work Chc, Satgawan Under Koderma Dist
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceablematerials with all leads all complete as per direction of E/I. |
| 2 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level.1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 3 | Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15m.lead and disposal of unserviceable materials with all leads complete as per building specification and direction of E/I. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15\" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended Floors, roofs, landings, balconies and access platform |
| 6 | Providing Tor steel reinforcement of 8mm dia rods as approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position ( excluding carriage ofbars to work site ) all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for Tata ( Tiscon ), SAIL, JSPL, Electrosteel Ltd. Bokaro and Vizal (RINL)) |
| 7 | S/f/f GCI sheetgate with M.S.grill made 20x6mm ……do………do……………..E/I |
| 8 | Dsimantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 9 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l. |
| 10 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing and laying 12mm water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: |
| 12 | Providing and laying granite over shrlves ……………..do ………do……………………E/I |
| 13 | Providing and laying vetrified wall tiles directed by Engineer-in-charge: |
| 14 | Providing and fixing steel door frame …………do….do……………………………..E/I |
| 15 | Supplying, fitting & fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 16 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface, including preparing the plastered surface by rubbing smooth with pumice stone of fine sand paper, applying putty whwrever required, scaffolding, washing of floors and taxes all complete as per building specufications and direction of E/L. |
| 17 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 18 | Providing two coats of synthetic enamel paintof approved shade and make over steel surface including cleaning the surface thoroughlyscaffolding and taxes all complete as per buildingspecification & Direction of E/I. |
| 19 | Taking down old door and window shutters including stacking serviceable materials with all leads all complete as per direction of E/I. |
| 20 | Taking down chaukhats in doors including stacking serviceable materials with all leads all complete as per direction of E/I. |
| 21 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 22 | providing 250mm wide brick draing in cement mortar (1:6) with av. 250mm and 250mm apron including stacking serviceable material within 15M lead and disposal of unserviceable material with all leads all complete as per direction of E/I.- |
| 23 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 24 | Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thicknes to be specified by the manufacturer) or 1st quality conforming to IS: 15622 of approved make in colours white lvory,Grey,Fume Red Brown,laid on 20mm thik bed of cement mortr 1:4(1 cement: 4 coarse sand),including grouting the joints with white cement and matching pigments etc. complete. |
| 25 | Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :300x20x6 mm |
| 26 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm |
| 27 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.300 mm weighing not less than 200 gms |
| 28 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm |
| 29 | Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. complete. |
| 30 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes confirming ti IS : 13592 type A including jointing with seal ring confirming ti IS : 5382 l;eaving 10mm gap for thermal expansion.Single socked pipes 110 mm dia |
| 31 | Providing and fixing on wall face unplastisised rigid moulded fittings/accessories for unplasticised PVC rain water pipes confirming to IS: 13592 type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion. Bend - 110mm |
| 32 | Shoe - 110mm |
| 33 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mmhard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 34 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 35 | Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, blackfinished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm bythe same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the p300/250N. Softening point of membrane not less than 150°C. Coldflexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane :22.20.1 3 mm thick |
| 36 | Carriage of materials by diesel Truck including loading at source, unloading at works site and stacking properly, labour, P.O.L., etc. all complete as per direction of E/I. cement +steel |
| 37 | Bricks - 25km |
| 38 | SAND av.LEAD13 K.M |
| 39 | Stonechips lead8km |
| 40 | Add 12 % GST |
| 41 | ADD 1% Labour |
AI Tender Summary
Tender Timeline
Oct 14, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender