Tender For Comprehensive B/R Repair To Md/Otm Accn, Repair/ Replacement Of Internal Electrification, Furniture And Repair To Hard Standing Paver, Blocks Etc At Aro Guntur Under Af Stn Suryalanka
Tender Value
6.10 Lakhs
Estimated cost
Bid Submission
08 Nov 2022
0 days left
EMD
12200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suryalanka → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive B / R Repair To Md / Otm Accn, Repair / Replacement Of Internal Electrification, Furniture And Repair To Hard Standing Paver, Blocks Etc At Aro Guntur Under Af Stn Suryalanka As Per Boq And Tender Document
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Nov-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cementor cement lime plaster, any description, on brick walls including racking out joints hacking for keyscrubbing down with water etc. complete all as specified and as directed. |
| 2 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and as directed. |
| 3 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finishing even and smooth with out using extra cement complete complete all as specified and as directed. |
| 4 | M&L for rendering 5mm thick on fair faces ofconcrete surfaces in cement mortar 1:3in ceiling surface finished even and smooth with out using extra cement complete all as specified and as directed. |
| 5 | M&L for preparation of newly plastered surfaces of walls and applying two coats of colour wash complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 7 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 8 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed. |
| 9 | M&L preparing old surfaces of ceilings, plastered or uplastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed. |
| 10 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one of OBD complete all as specified and as directed. |
| 11 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one of colour wash complete all as specified and as directed. |
| 12 | M&L preparing old steel surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as specified and as directed. |
| 13 | M&L preparing old wooden surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as specified and as directed. |
| 14 | Taking down chowkats or frames (without taking off shutters from frame ) not exceeding 1.5 sqm each all as specified and directed.(including cutting holes for removing / inserting hold fasts and making good disturbed portionswith PCC 1:2:4 type B-0 or in CM 1:4 after re fixing of frames) complete all as specified and as directed. |
| 15 | Taking down shutters of any description exc 1.00sqm and n.exc 2.00sqm each complete all as specified and as directed. |
| 16 | S&F of Pressed steel frames 75 x 50 mm size for cup boardswith one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. |
| 17 | M&L for Plain cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate for filling of hollow portions of door frames etc., complete all as specified and as directed. |
| 18 | S&F of 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 19 | S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 20 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and as directed. |
| 21 | S&F of powder coated anodised aluminium window andventilator glazed and Guzed shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/s (standard aluminium section of DG-2496of sizes 39.4 x 17.7 mm and1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2Nos), suitable handle (1Nos) for each shutter complete all as specified and as directed. |
| 22 | S & F in repairs of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with stainless steel wire staples or wooden/aluminium beds complete all as specified and as directed. |
| 23 | S&F of 4 mm thickSheet Glass, ordinary quality and glazing fixed with aluminium beads,sqare exc 0.50sqm in each pane complete all as specified and as directed. |
| 24 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and as directed. |
| 25 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and as directed. |
| 26 | S&F of 150 mm long Aluminium alloy handles cast type anodised complete all as specified and as directed. |
| 27 | S&F 100 mm long Aluminium butt hingesextruded aluminium alloy with galvanised steel wire pin anodised, type C-22 complete all as specified and as directed. |
| 28 | S&F 75 mm size Hasp and Staple aluminium anodised safety type with pin hinge including bolt to hinge plate and fixed with screwscomplete all as specified and as directed. |
| 29 | S&F of 300 mmlong aluminium alloy anodised sliding door bolts with hasp and staple (bolt type)and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 30 | S&F of curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets fixed in repairs complete all as specified and as directed. |
| 31 | S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and as directed. |
| 32 | S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed. |
| 33 | S&F in repairs 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 34 | S&F in repairs 100mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 35 | S&F in repairs 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 36 | S&F in repairs 150mm size aluminium alloy handles of extruded section, fabricated type complete all as specified and as directed. |
| 37 | S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of overall length of cover plate 150mm fixed in repairs complete all as specified and as directed. |
| 38 | M&L for Preparing new or previously un treated surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 39 | M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 40 | Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and removing from store etc complete all as specified and as directed. |
| 41 | S&F rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and flu nut screwed for iron pipe or brass and fixed etc complete all as specified and as directed |
| 42 | S&F in repairs bib taps, CP fancy typewith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and directed. |
| 43 | S&F as in repair fancy type 15 mm bore pillar taps Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and complete all as specified and as directed. |
| 44 | S&F of 10 lit capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythene of low/high density PVC 32mm dia for low level cistern complete, fixed in repairs, complete all as specified and as directed. |
| 45 | S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 32 mm bore PVC waste pipe complete all as specified and as directed. |
| 46 | S&F in repairs 15 mm dia stop valve cast copper alloy screwed down high pressure, with crutch or butter fly handles, screwed both ends for iron pipe with CP fancy type complete all as specified and as directed. |
| 47 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs complete all as specified and as directed. |
| 48 | S&F of PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 49 | S&F of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed. |
| 50 | Demolition of plain cement concrete (un-reinforced) of any description and in any position not other wise specifically provided for, including removal of demolished material out side MD land complete all as specified and as directed. |
| 51 | M&L for hardcore of gauge n.exc 63mm, with broken stone/boulders deposited, spread and levelled in layers not exceedings 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 52 | M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 53 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6for laying floor finishescomplete all as specified and as directed. |
| 54 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed. |
| 55 | M&L for 100mm thick plain cement concrete 1:2:4 mix type B-2 (using 40mm graded stone aggregates) as in floors, hard standings, pavings etc surface finished even and fair with out using extra cement complete all as specified and as directed |
| 56 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregateas in bencing of chequered tiles including slightly rounded do chamfered angles and throating complete all as specified and as directed. |
| 57 | S&F in replacement Modular socket, 6A, 5 pin combination 2 module complete all as specified and as directed. |
| 58 | S&F in replacement Modular switch socket combination , 16A, 6 pin 3 module complete all as specified and as directed. |
| 59 | S&F in replacement modular switch one way 6 Amps, 1 module complete all as specified and as directed. |
| 60 | S&F in replacement of modular Fan regulator electronic step type, 120W- 2 module, 240V single phase complete all as specified and as directed. |
| 61 | S&F MCB Single Pole 6-32 Amps, 240V, C Curve, 10 kA, Complete all as specified and as directed. |
| 62 | S&F Isolator 4 Pole 63 Amp, 415V Complete all as specified and as directed. |
| 63 | S&F in replacement 4 Feet LED Tube light of 20Watt integrated Batten LED polycarbonate Tube light with inbuilt driver <10% THD with very high efficiency and connected upto ceiling rose including taking down existing Tube light fitting of any type complete all as specified and as directed. |
| 64 | Taking down ceiling fan, cleaning internally & external and removing defective winding and rewinding with new super enamelled copper wire of existing gauge and weight as per manufactures design and instructions including insulating materials and varnishing of ceiling fans of of size 1200/ 1400mm sweep of any make and re-assembling testing complete and refixing to the location including replacement of flexible copper wire from ceiling rose to ceiling fan complete all as specified and as directed. |
| 65 | Supply only condenser (capacitor) 3.15/ 2.5 MFD, 440 Volts, AC, 50 Hz as per IS : 1709 suitable for ceiling fan 1200/ 1400mm sweep complete all as specified and as directed.Make:- ASIAN/ CROMPTON/ Bajaj as approved by AGE |
| 66 | M&L for cleaning of complete indoor/outdoor units of 1.5 TR Capacity Split Air conditioner by means of adding, cleaning solution (HCL) or equivalent solution with water complete all as specified and as directed.Note:- The cleaning of the condenser and chillier units shall be done using nylon brushers till the scaling is removed completely |
| 67 | M&L for Top up / Gas charging with refrigerant gas (R-22/32/410) for Air conditioner window type / split type of capacity 1.5 / 2Ton after vacuuming &leak testing including bracing suction/discharge line and testing complete all as specified and as directed. |
| 68 | Starting Capacitor 35 to 45 MFD complete all as specified and as directed. Make:- Topcon / Ducati / Kenton / Concap) |
| 69 | Universal PCB Timer electronic switch with sensor suitable for all makes of split 1.5 / 2 Ton AC complete with hand setincluding taking down unserviceable Electronic PCB from existing unit complete all as specified and as directed.Make:- Baba/ Wavess or its equivalent as approved by AGE(I) |
| 70 | M&L for Earthing complete with GI Earth Plate electrode 600x600x6mm buried directly in ground earth pit not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level, surrounded from all sides with mixture of charcoal and common salt and electrode connected with GI earth lead wire of 4.0 mm by means of nuts/bolts/ check nuts/ wahers , GI pipe light grade of 15 mm bore as protection pipe, GI Strip of length not more than 7.5 mtr and connected to test point. GI pipe 20mm dia light grade for watering, funnel with wire mesh, PCC pit and RCC (1:2:4) type B-1 for cover with 8 mm dia bar reinforcement both ways @ 140 c/c including excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as shown on electrical plate No 3 of SSR 2009 complete all as specified and as directed. |
| 71 | S&F in replacement of Locking Device including locking rods for Almirah large steel complete all as specified and as directed. |
| 72 | S&F in replacement of Steel Handle 150mm long, for Almirah large steel complete all as specified and as directed. |
| 73 | S&F in replacement of Lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for Almirah large steel complete all as specified and as directed. |
| 74 | M&L for Preparation of external and internal surface of Large steel Almirah, de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic enamel paint complete all as specified and as directed. |
| 75 | S&F in replacement of Locking Device including locking rods for Almirah medium steel complete all as specified and as directed. |
| 76 | S&F in replacement of Lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for Almirah medium steel complete all as specified and as directed. |
| 77 | S&F in replacement of Steel Handle 100mm longof mild steel chromium plated for locker bed side steel complete all as specified and as directed. |
| 78 | M&Lfor Preparation of external and internal surface of Medium steel Almirah, de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic enamel paint complete all as specified and as directed. |
| 79 | M & L of Painting of Rack Shoe complete all as specified and as directed. |
| 80 | Replacement of ply wood top of size12 mm for charpoy GI Pipe/Bed Ply Top with screws, Nut and Washer complete all as specified and as directed. |
| 81 | Replacement of Foam cushion 21\" x 22\" x 100 mm complete all as specified and as directed. |
| 82 | S&F in replacement of canning of seat and back of chair Verandah with 4mm wide half round plastic cane of best quality complete all as specified and as directed. |
| 83 | S&F in replacement of Canning of seat and back of chair Easy with 4mm wide half round plastic cane of best quality complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Nov 01, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 08, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender