Public Works Department-PWD has published Tender For Special Repair Of Hp Staff Selection Commission Hamirpur. Submission Date for this Tender is 19-10-2022. Civil Work Tenders in hamirpur Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etcetera complete and stacking within 20 metre (Twenty millimetre) lead not exceeding area 3 sq. metre (Three square metre) and below including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material nominal concrete 1:3:6 (One cement : three sand : six graded stone aggregate) or richer mix (including equivalent design mix)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 metre (One point five metre) in width or 10 sqm (Ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 metre (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, pumping and bailing out water(surface and sub soil water) upto all depth and any quantum of waterincluding cleaning of slush which may arise out during dewateringand all kinds of soil including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Centering and shuttering including strutting, propping etcetera and removal of form work for including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Suspended floors, roofs, landings, shelves and their supports balconies girders bressumers and cantilever. |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Providing and laying in position mechanical mixed and vibrated cement concrete of 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre)nominal size graded stone aggregate for all works of foundation and plinth,catch pit,toe walls and below pipe excluding the cost of centering and shutteringincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five nominal size including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 11 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg ( one point seven kilogram )per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oilincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 12 | Providing and layingmechanically mixed and vibrated design mix reinforced cement concrete ofM-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with mimimumcement content of 400Kg ( four hundred kilogram) per cubic metrein foundation fotting bases of columns and the like and mass concrete above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 13 | Providing and layingmechanically mixed and vibrated design mix reinforced cement concrete ofM-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content of 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand).including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 15 | Steel reinforcement (TATA /SAIL make)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level mild steel and medium tensile steerl bars of grade Fe-500D or more including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 17 | Providing and laying hard stone (for stone pitching) 22.5cm (twenty two point five centimetre) thick at site including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 18 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections (JINDAL/HINDALCO/BALCO) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings(Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections (JINDAL/HINDALCO/BALCO) For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 (Fifteen) micron) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing 12mm (Twelve millimetre) thick prelaminated board flat pressed three layer or graded wood particle board HD HMR of Action tesa/Green ply/Kit ply/ Century ply make conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & lengthSecond class teak wood including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Providing and fixing 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st(First) class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 23 | Providing and fixing 35 mm (Thirty five millimetre) thick2nd (Second) class teak wood Glazed Shutters for doors, windows and clerestory windows using 4 mm (Four millimetre) thick float glass panes of ModiguardSaint Gobain, Asahi make(weight not less than 10kg/sqm (ten kilogram per square metre) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 24 | Providing and fixing 35 mm (thirty five) thick 2nd (Second) class teak woodWire Gauge Shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm( one point four millimetre) in both directions with wire of dia 0.63 mm,(zero point sixty three millimetre) for doors, windows and clerestory windows with hinges and necessary screwswith with ISI marked M.S. pressed butt hinges of required size all complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 25 | Providing and fixing M.S. grills (TATA/JSW/SAIL) of required pattern in frames of windows etcetera with M.S. flats, square or round bars etcetera including priming coat with approved steel primer all complete Fixed to steel windows by weldingincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 26 | Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 27 | Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 28 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetracomplete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 29 | Providing and fixing 150x10 mm (One Hundred fifty into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetracomplete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 30 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing 100 mm (One hundredmillimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 32 | Providing and fixing aluminium hanging floor door stopper (Twin rubber stopper) , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm(one hundred fifty millimetre) completeincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 34 | Providing and fixing 20mm ( twenty millimetre) diachromium plated brass Curtain Rod withKnobs at endshaving wall thickness of 1.25mm ( one point two five millimetre)with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 35 | Providing and laying vitrified floor tiles of size 300x300x9.8 mm (Three hundred into three hundred into nine point eight millimetre) Orient bell/ Kazaria/AGL/Johnson & Johnson approved make or more (thickness to be specified by the manufacturer), of 1st (First) quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twenty millimetre) thick Cement Mortar 1:4 (One Cement : four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogramme per square metre) including pointing the joints with white cement and matching pigments etcetera, complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing 1st quality HD series Digital Glazed rectifiedceramic tiles (300mmx600 mm size) ( Three hundred into six hundred millimetre)conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell/ Kazaria/ Rak/Johnson & Johnson make , in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre )thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 37 | Providing and laying600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent)and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white and matching pigment etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 38 | Providing and laying600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent)and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades,, in skirting, riser of steps,with cement bases high polymer modified quick set tile adhesive ( water based) conforming to IS:15477 in average 6mm (six millimetre)thickincluding groutingthe joints with white cement and matching pigments etcetera, complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Steel work welded in built up sections(TATA/ SAIL/ Apollo/ JSW Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | Providing and fixing Precoated Galvanised Iron Profile Sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre)+ 0.05 % ( Plus zero point zero five percentage)total coated thickness with zinc coating 120 ( one hundred twenty)grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required upto all floor level/height including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 41 | Providing and fixing Ridges Plain 500 - 600mm ( five hundred to six hundred millimetre)Precoated Galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make0.50 mm ( zero point five zero millimetre)+ 0.05 % ( Plus zero point zero five percentage)total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven)microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 42 | Providing and fixingplain glass panes of nominal thickness 4 mm ( four millimetre)make of Modi Float/Saint Gobain/Atul (weight not less than 10kg/sqm (Ten kilogram per square metre) of renewing glass paneswith putty and nails wherever necessary including racking out the old putty including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 43 | Providing and fixing Galvanised iron clip in Metal ceiling system (Monard/Reptile/Armstrong) of 600x600mm (six hundred into six hundred) millimetre module which includes providing and fixing C. wall angle of size 20x30x20mm (twenty into thirty into twenty) millimetres made of 0.5mm (zero point five) millimetres thick prepainted steel along the perimetre of the room with help of nylon sleeves and wooden screws at 300mm (three hundred) millimetre centre to centre suspending the main C carrier of size 10x38x10mm(ten into thirty eight into ten) millimetre made of galvanised iron steel 0.7mm (zero point seven) millimetre thick from the soffit cleat 37x27x25x1.6mm(thirty seven into twenty seven into twenty five into one point six ) millimetre rawl plugs of size 38x12mm(thirty eight into twelve) millimetre and C carrier suspension clip and main carrier bracket at 1000mm (one thousand) millimetre centre to centre inverted triangle shaped spring tee having height of 24mm(twenty four) millimetre and width of 34mm( thirty four) millimetre made of galvanised iron steel 0.45 (zero point four five) millimetre thick is then fixed to the main C carrier and in direction prependicular to it at 600mm (six hundred) millimetre centres with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connections have to be used. All sections to be galvanised @ 120 gms/sqm ( one hundred twenty gramme per squaremetre) (both side inclusive) fixing with clip in tiles into spring T with including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | 15 mm ( fifteen millimetre)cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six coarse sand)upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 45 | 20 mm (twenty millimetre) cement plaster of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre)of approved brand and manufacturer (J K White/ Birla White) over the plastered wall surface to prepare the surface even and smooth complete upto all floor levelincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre ( fifty grams per litre) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Painting wood work with Deluxe Multi Surface Paint of required shade withTwo or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five per ten square metre) (ASAIN,NEROLAC,ICI-DULUX, Beger, (Luxol High Glass)Shalimar paint ( premium apecolite Gloss) of approved brand and manufactureincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 49 | Polishing with two or more additional coat as required with french polished wood and wood based surface(Asian /Nerolac/ICI Dulux) including cleaning the surface of all dirt dust and sand papered smooth and including a coat of wood fillerincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer (ASAIN/NEROLAC/ICI-DULUX )including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMAof required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point six seven litre per ten square metre)over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) complete upto all floor levelincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | WATER SUPPLY AND SANITARY INSTALLATION |
| 53 | Providing and fixing white vitreous china full pedestal type water closet (EWC) of size 52x36x39cm (Fifty two into thirty six into thirty nine centimetre) of Hindware(slick-S-519010)with soft cloasing seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern of Hindware (Slick Smart) of size 47.6x15x30cm (Forty seven point six into fifteen into thirty centimetre) including flush pipe, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing550mmx400mm (Five hundred fifty into four hundred millimetre) (under Counter) vitreous china wash basin Cera / Hindware/ Parryware make with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete in all floor level/heightsincluding entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing white Vitreous Chinafull pedestal (ARS-WHT-39301 of Jaquar)for wash basin completely recessed at the back for the reception of pipes and fittings of Hindware/ Jaquar / Cera make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre)beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre)thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of ( Modigaurd/ Atul/Cera/Exotica make)including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing CP towel rail of Jaquar (ACN-CHR-1111SM) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre)long including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimetre)glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre)long screws, rawl plugs etcetra, complete of Hindware/Jaquar/Cera make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Providing and fixing Chromium Plated soap Dish Holder of Jaquar ( ACN-CHR-1131N ) with concealed fitting arrangements including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and fixing 15mm ( fifteen millimetre)dia. C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 make of Jaquar/Parryware/ Hindwareincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Makeincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing 15mm (Fifteen millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK makeincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and fixing110 mm ( one hundred ten milimetre )dia Chromium Plated Grating of superior quality for floor, gully or nahani trap with hingesincluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Chargeincluding other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality of ESSCO (ALE-547) and make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Chargeincluding other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing 100mm (one hundred millimetre) dia nominal size soil, waste and vent pipesCentrifugally Cast (spun) iron socketed pipe as per IS: 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing 75mm (seventy five millimetre) dia nominal size soil, waste and vent pipesCentrifugally Cast (spun) iron socketed pipe as per IS: 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 100 mm (one hundred millimetre)nominal sizeplain bend of required degree of Sand cast iron (S&S) as per IS : 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Provding and fixing 75mm (Seventy five millimetre) nominal size plain bend of required degree sand cast iron (S&S) as per IS 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Providing and fixing 100mm (one hundred millimetre) dia nominal size door bend Sand cast iron S&S as per IS - 3989 required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts completeincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing 75mm (seventy five) dia nominal size door bend Sand cast iron S&S as per IS - 3989 required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixingsand cast iron (S&S) pipe as per IS: 3989 100 mm (one hundred millimetre) inlet and 75 mm (seventy five millimetre)Outlet Trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floorsincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing and fixing 100mm (one hundred millimetre) dia nominal size Collarof Sand cast iron S&S as per IS - 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Providing and fixing 75mm (seventy five) dia nominal size Collar of Sand cast iron S&S as per IS - 3989including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing Lead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 100mm (one hundredmillimetre) diameterincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | ProvidingLead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 75mm (seventy five millimetre) diameterincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 15mm (fifteen millimetre) nominal sizeG.I. Pipes (TATA/JINDAL) complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Zindal /Tata makeincluding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
