Tender For Replacement Of Damaged A. C. Sheets, Down Take Pipes, Curves, Eaves Gutters Of Various Buildings Inside Factory And Magazine At O. F. Chanda.
Tender Value
58.07 Lakhs
Estimated cost
Bid Submission
03 Nov 2022
0 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement Of Damaged A. C. Sheets, Down Take Pipes, Curves, Eaves Gutters Of Various Buildings Inside Factory And Magazine At O. F. Chanda.
BOQ
| Sl. No. | Item Description |
| 1 | Cat (A) -Items to be supply and fixing |
| 2 | Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof covering, ridges, wall cladding, any thickness, ridges including all safety equipment required to remove the sheets at any height and removing rubbish off from the premises & deposited where directed etc.Complete all as per the direction of Engineer-In-Charge. |
| 3 | S & F 6mm thick asbestos cement corrugated sheets in roof & wall at fixed with L-type or J-type or cranked hook bolts at any height in repairs fully or part thereof with all safety PPE’s required Make:- Swastik, Charminar, Everest, Vishaka or equivalent only all as per the direction of Engineer-In-Charge. |
| 4 | S & F asbestos cement two piece adjustable plain wing ridge 6mm thick in roof, fixed with L-type or J-type or cranked hook bolts including removing of old broken ridges & rubbish off the premises at any height in repairs fully or part thereof with all safety PPE’s required etc. complete all as per the direction of Engineer-In-Charge. |
| 5 | Supply & fixing of Asbestos cement North light curves to suit existing asbestos cement sheets, fixed with L-type, J-type or cranked hooks, bolts & bitumen felt & steel washers using all necessary arrangements at any height & removing rubbish off from the premises & deposited where directed etc. complete all as per the direction of Engineer-In-Charge. |
| 6 | S & F PVC (SWR) rainwater pipes of bore dia. 150mm including necessary Bends required as per site condition, single socketed in any length with rubber ring joints (Make:- Finolex, Plasto, Prince, Bajaj or equivalent only acceptable), pipes to be fitted to PVC fittings with solvent cement, pipe & fittings shall be fixed in vertical alignment using mild steel flats (40 x 3mm) clamps including necessary accessories required to fix & holding in position with all safety appliances etc. complete all as per the direction of Engineer-In-Charge. |
| 7 | Hacking out old broken glasses (any thickness, size, quality or description & height) from metal frames including punching or drilling out old glazing pins/spring clips, cleaning rebates in preparation for reglazing carefully, removing any serviceable glass to CE section and rubbish off the premises etc. complete all as per the direction of Engineer-In-Charge |
| 8 | S & F Rough cast wired glass exceeding 1.00 sqm but not exceeding 1.50 sqm, of thickness 6.4mm, reinforced with steel wire 0.46mm to 0.56 mm dia. square pattern of wire mesh embedded completely in glass sheet atleast 1mm from surface. Wire shall not be exposed at any place. Make:- Triveni Glass or equivalent, fixing of glass with oil putty & suitable spring clips or teak wood beading as per site requirements, painting oiling putted to new beaded surface to match existing work using necessary scaffolding and safety appliances to work upto 60 feet height etc. complete all as per the direction of Engineer-In-Charge |
| 9 | S & F Pre painted Galvalume aluminium zinc coating GI based Corrugated steel roofing 0.50 mm thick for roofing & side wall cladding withtensile strength 550MPa. Available in bare finish & colour coated finish, as per user design. (Make-Ispat Industries Ltd. /SAIL/TATA/Century wells roofing Ind. Ltd./ Jindal or equivalent only acceptable) and fixing in roof withself- drilling and tappinghexagonal head screws & bituminous felt & Neoprene /EPDM washer using all necessary arrangements such as ladders, safety belts, helmet & necessary safety appliances etc. complete all as per direction of Engineer-In-Charge. |
| 10 | S & F Pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall.(Make-Ispat Industries Ltd. / SAIL / TATA / Century wells roofing Ind. Ltd. / Jindal or equivalent only acceptableand fixing in roof withself-drilling and tapping screw & bituminous felt & steel washer using all necessary arrangements such as ladders etc. complete all as per direction of Engineer-In-Charge. |
| 11 | S & F Mild steel sheet eaves gutters, Galvanized class 3, half round with rounded edges of dia. 150 mm with thickness of 1.25 mm etc. complete all as per the direction of Engineer-In-Charge. |
| 12 | Cat (B) - Buy Back Items (ie minus) |
| 13 | Schedule of credit to Contractor for item No. 01 (A.C.Sheet). |
AI Tender Summary
Tender Timeline
Oct 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender