|
| 1 | Supplying and fixing of surface mounting Syntax Make 4 way junction box of PVC material of size (230 mm) outside dimension 185x165x60 mm deep single doorwith front coverside hinged type, having 4 number Aluminum bus bar of 100 amp for incoming and outgoing cables. The box shall be fixed with suitable size of 8 nos. supporters, clamps 2 numbers with nuts and bolts on pipe /truss /column etc as required. |
| 2 | Supply ofRCC Pole for distribution of power supply cable of following specification L x W x B = 11mtr (Length)x 15cm (width) x 350cm (bottom) weight upto 200 kg |
| 3 | Dismantlingof existing LED flood light/bracket light/junction box and hand over to EIC at department store in good condition. |
| 4 | Supply of 4 X 16 sq. mm size (Armored) XPLE PVC insulated PVC sheathed aluminum conductorcable of 1.1 KV Grade. |
| 5 | Supply & Fixing of Multi LED flood light 120 watt with five years unconditional replacement guarantee for highly efficient LED flood light made of pressure die cast aluminum housing with lens & toughened glass top maintenance type IP66. |
| 6 | Supply & Fixing of Multi LED street light 90 watt with five years unconditional replacement guarantee for highly efficient LED street light made of pressure die cast aluminum housing with lens & toughened glass top maintenance type IP66. |
| 7 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with exixting surface/recessed conduit/submaim wiring/cableas required. |
| 8 | Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 11.00 metre and upto 13.00 metre |
| 9 | Supplying and erection of galvanised \"D\" iron clamps complete with shackle insulator (75 mm X 90 mm), G.I bolts, nuts and washers, coach screws etc. as required. |
| 10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm |
| 11 | Aluminium lugs for 16 sq. mm cable |
| 12 | Supplying of channel iron 75 mm X 40 mm 6 mm ( 7.14 kg per meter) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing ) and painting with primer and finished paint as required |
| 13 | Dismantling of over head lines comprising of copper/ aluminium over head conductor/aluminium Cabels , G.I. wire, cross arms, insulators etc. as required. (Varies Size) |
| 14 | Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required. |
| 15 | Buy-back of dismantled old pole & panel. The quoted amount will be deduced from total amount. |
| 16 | Buy-back of dismantled old street light / fiood light |