|
| 1 | Appendix-1-Repair of rain shelter at Tunnel Area |
| 2 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 3 | 50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. |
| 4 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 5 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 6 | 13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 7 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 8 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 9 | od4303/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing |
| 10 | Appendix-2-Front sales counter |
| 11 | od3772/2022_2023 : Dismantling re-fixing of existing tubular section of steel work manually / by mechanical means in built up sections for completing the work as per directions of Engineer -in-Charge. |
| 12 | od3765/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring. |
| 13 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 14 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 15 | Appendix-3-Rainshelter 1 |
| 16 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 17 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 18 | od3774/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring. |
| 19 | od3761/2022_2023 : Supplying and laying (HDPE coated) black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing etc., to complete as per direction of Site Engineer. |
| 20 | od3762/2022_2023 : Supplying fixing and laying 50-75% (UV Stabilized) shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs/PVC coated handing hucks/rings with out damaging shade net with manual rolling systems including all frame work and necessary fittings at user comfortable height |
| 21 | Appendix-4-Rain Shelter - 2 |
| 22 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 23 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 24 | od3776/2022_2023 : Supplying fixing and laying 50-75% shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs/PVC coated handing hucks/rings with out damaging shade net with manual rolling systems including all frame work and necessary fittings at user comfortable height |
| 25 | od3777/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing |
| 26 | Appendix-5-Slab |
| 27 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 28 | 5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 29 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 30 | Appendix-6-Block-1-Vegetable Seedlings shed |
| 31 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 32 | 50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. |
| 33 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 34 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 35 | 13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 36 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 37 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 38 | Appendix-7-Poly House-No.1- Fruit Plants |
| 39 | 15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 40 | 15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 41 | 15.19 : Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge. |
| 42 | 15.20 : Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metes. |
| 43 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 44 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 45 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 46 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 47 | 50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 48 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 49 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 50 | 13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 51 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop |
| 52 | 14.31.3 : Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete:100 mm |
| 53 | 50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 54 | 50.18.9.5.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2 |
| 55 | 50.18.9.6.2 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 |
| 56 | 18.62.4 : Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.40 mm nominal bore, 206 mm long, weighing not less than 690 gms |
| 57 | 18.62.5 : Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P / H.P.H.D plastic ball.50 mm nominal bore, 242 mm long weighing not less than 1240 gms. |
| 58 | 18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal |
| 59 | od4405/2022_2023 : Supply and Installing LLDPE 16mm Drip Lateral Pipes, including Grommet, Take off, End holder etc., to complete as per the direction of Engineer in charge. |
| 60 | od4406/2022_2023 : Supplying and fixing of four way fogger emitters 5 to25 LPH leak proof snap fit joint ,fine droplets of average 90 microns, counter weight operating pressure 22psi |
| 61 | od4421/2022_2023 : Supplying and fitting micro jet/ sprinkler with 1 to 2 m wetted diameter and average discharge of 8-24 Iph and 0.30m length of LLDPE 5 mm micro hose/tube. And necessary fittings etc., to complete as per the direction of site in charge |
| 62 | od4506/2022_2023 : Supplying and fixing UV stabilized Polyethylene film 200 micron thick, IR blocking, Anti drip/ fog diffused multilayer, on the G.I. truss work with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring. |
| 63 | od4456/2022_2023 : Supplying and fixing Anti insect net/Mono insect net of 40 meah-100-120 GSM including wastage 5%,Size: 2.5 Mtr.,3 Mtr,4.2 Mtr, with aluminium locking profile and zig zag spring galvanised with hex washer etc. complete but excluding the cost of aluminium locking profile and zig zag spring. |
| 64 | od4457/2022_2023 : Supplying fixing and laying 50%to 75% shade net on the movable shade net screening with aluminium strip channels or PVC coated zig zag springs with out damaging shadenet with manual rolling systems including all frame work and necessary fittings at user comfortable height |
| 65 | od4458/2022_2023 : Supplying and laying black weed mat using Ground Cover; Widely used For Agriculture farms and home garden to restrain the grass growing |
