Tender For Source Strengthening And Rehabilitation Of Various Water Supply Schemes Under Js Sub Division Dharampur Tehsil Dharampur District Mndi (Hp) (Under Jjm)
Tender Value
4.72 Crore
Estimated cost
Bid Submission
26 Oct 2022
0 days left
EMD
5.04 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharampur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Source Strengthening And Rehabilitation Of Various Water Supply Schemes Under Js Sub Division Dharampur Tehsil Dharampur District Mndi ( Hp ) ( Under Jjm ) ( Sh:- Source Strengthening & Protection Of Percolation Well / Tanks, C / O Ranks, Repair & C / O Pump Houses, S / E Of Pumping Machinery & C / O Thrust Block )
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth upto all leads and lifts complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 2 | Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work, blasting work, chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads including lifts and soring/strutting timbering and dewatering where ever required as per thr direction and to the entire satisfaction of the Engineer-in-charge. |
| 3 | Excavation in foundation for digging well in dry excavation from G.L. upto the level where well curb is placed the depth as per thr direction and to the entire satisfaction of the Engineer-in-charge. |
| 4 | Wet well sinking gravel including all pumping, soring etc. as per thr direction and to the entire satisfaction of the Engineer-in-charge. |
| 5 | From Spring level to 3.00 mtr. depth |
| 6 | From spring level to 3.00 mtr. to 6.00 mtr. depth |
| 7 | From spring level 6mtr. to 8.50 mtr. |
| 8 | Steel work in single section including cutting, hoisting & fixing in position and applying a coat of primer or red lead paint in R.S. Joists, Channel, angles and tees etc. Complete within all leads & lifts as per entire satisfaction of Engineer in charge. |
| 9 | Lowering of well curb complete within all leads & lifts as per entire satisfaction of Engineer in charge. |
| 10 | Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete in all respect including carriage of materials in all leads and lifts as per direction and to the entire satiafaction of the Engineer-in- charge in all lead and lifts. |
| 11 | Providing and laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40mm nominal size)curing complete excluding cost of form work in foundation and plinth as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 12 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 13 | Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded crushed stone agg. 40mm nominal size) and curing complete excluding cost of form work in:- Foundation and plinth upto all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 14 | Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)and curing complete excluding cost of form work in |
| 15 | Foundation footing bases of columns etc and mass concrete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 16 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 17 | Providing & Laying cement concrete work Grade M30 (Design Mix) but not leaner than 1 : 1.5 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 18 | Foundation footing bases of columns etc and mass concrete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 19 | Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 20 | Lintels,beams, girders, bressumers and cantilevers upto floor two level within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 21 | Column, pillar, posts and struts upto floor two level as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. |
| 22 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 23 | Archesupto floor two level in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-charge. |
| 24 | Providing and laying cement concrete in Grade M 25 and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 25 | Foundation footing bases of columns etc and mass concrete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 26 | Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 27 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- |
| 28 | Foundation footing bases of columns etc and mass concretecomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 29 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, Floors etc. up to any thicknesscomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 30 | Vertical surfacessuch as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the likecomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 31 | Columns, pillars, post and struts, Square, rectangular or polygonal in plancomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 32 | Beam, cantilever, girders and lintels, Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 33 | Edges of slabs and breaks in floors and walls under 20cm wide in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 34 | Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting & propping etc. height of propping & centring below supporting floor to ceilling not exceeding 4 mts. And removal of the same for insitu-reinforced concrete and plain concrete work in : |
| 35 | Arches exceeding 6.00 mtrs span as per direction and to the entire satisfaction of Engineer-in-charge. |
| 36 | Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 37 | Providing RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement :3 sand) and curing complete in all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 38 | Stone soling/boulder filling dry hand packed in under floor within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 39 | Stone/boulder filling below cement concrete courtyard within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 40 | Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and seperating out from RCC/RB works as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 41 | Providing and laying no fine cement concrete 1:4 (1 cement: 4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in. Cement Mortar 1:6 |
| 42 | Providing and fixing steel fibre reinforced concrete(SFRC) Manhole coversand frame confirming to IS : 12592 (part-I) 1988 with latest ammendments extra heavy should not be less than 100Kg, circular 560mm dia meter as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 43 | Providing and fixing precast concrete manhole cover and frame, conforming to IS 12692-2002, 560mm dia completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 44 | Providing 200 mm wide CI rungs with chequered or ribbed non slip surface i/c fixing in structure with 200 x 200 x 100 mm cement concrete 1:3:6 ( 1 cement :3 sand : 6 graded stone aggre 20 mm nominal size ) as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 45 | Providing and Fixing percolated GMS pipe 100 mm dia HC with hole diameter 15mm to 40mm C/C in all leads and lift as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 46 | Providing and placing of graded filter media complete in all leads and lift as per direction of Engineer in charge. |
| 47 | Boulder size100mm to 150mm |
| 48 | Pea Greaval 20mm to 40mm |
| 49 | Pea Greaval 10mm to 20mm |
| 50 | Brick work using common burunt clay building bricks in foundation anf plinthl in cement mortor 1:6 (1 cement : 6 sand) (2nd class brick) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 51 | Brick work using common burunt clay building bricks in foundation anf plinthl in cement mortor 1:4 (1 cement : 4 sand) (2nd class brick) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 52 | Half brick masonry in common burnt clay 2nd class building bricks in superstructure above plinth level upto floor two level in cement mortar1:4 (1 cement :4 sand) as per direction and to the entire satisfaction of Engineer-in-Charge upto all lead and lifts. |
| 53 | Providing wood work in frames of door, window, clerestory window and other frames wrought, framed & fixed in position as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. (2nd class deodar wood) |
| 54 | Providing and fixing pressed steel doors and windows frame manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5mm thick with guards, lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as desired by Engineer-in-charge. |
| 55 | Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (2nd class deodar wood) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 56 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level includong arises, internal round angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth (Cement mortar 1:4) |
| 57 | 20mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level includong arises, internal round angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth (Cement mortar 1:4) |
| 58 | 6 mm Cement plaster to ceiling In cement mortar 1:4 (1 cement: 4 sand) |
| 59 | Cement concrets flooring 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40 mmthick) as per direction and to the entire satisfaciton ofEngineer-in-charge upto all lead and lift. |
| 60 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete 40 mm Thick as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 61 | Providing and fixing 10mm thick anti skidwaterproofstainandimpect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mmmanufacturedof approvedshadeandcolourin flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade oftilesas required complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 62 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. as per the direction and to the entire satisfaction of Engineer-in-charge. |
| 63 | 300 x 16 mm |
| 64 | 150 x 16 mm |
| 65 | Providing and fixing aluminium tower bolt (barrel type) anodized transparent or dyed as per the direction and to the entire satisfaction of Engineer-in-charge . |
| 66 | 250 x 10 mm |
| 67 | 200 x10 mm |
| 68 | 150 x 10 mm |
| 69 | Providing and fixing aluminium handles anodized transparent or dyed to required colour shade with necessary screws etc. Complete as per the direction and to the entire satisfaction of Engineer-in-charge. |
| 70 | 125 mm |
| 71 | Providing & fixing oxidized M.S. Hooks and Eyes 150 mm with screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 72 | Providing and fixing 100mm bright finished mild steel floor door stopper with rubber cushion screws etc. to suit shutter thickness complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 73 | Providing 40x3 mm iron hold fast 40 cm long including Fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 gradedstoneaggregate 20 mmnominal size) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 74 | Steel work welded in builtup section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting in trusses and trussed purlins in building as per direction of Engineer-in-Charge upto all lead and lift. |
| 75 | Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackets and similar works as per direction of Engineer-in-Charge upto all lead and lift. |
| 76 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leadsand lifts as required as per the direction of Engineer-in-charge |
| 77 | Random rubble masonry/Polygonal rubble masornry ( uncoursed/ brought to courses) with hard stone of approved quality in foundation and plinth I/c levelling up with cement conrete 1:6:12 (1cement:6 sand :12 graded stone aggregate 20 mm nominal size ) at plinth level in cement motar 1:6 ( 1cement:6 sand)includingcuring complete. As per direction and to the antire satiafaction of the Engineer-in- charge in all lead and lifts. |
| 78 | White washing with lime on undecorated wall surface two coats to give an even shade I/c throughly brooming the surface to remove all dirt, dust, mortar, dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge. |
| 79 | Applying priming coat over new wood and wood based surfaces after and inciuding preparing the suface be thoroughly cleaning oil grease dirt and othr foreign sand papering and knotting Readymixed paint brushing wood primer pink complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 80 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paintto give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 81 | Providing and fixing Manhole cover of size 60x60 cm madeof angle iron frame size 40x40x5mm thick covered with M.S. sheet 2.00mm thick and welded with angle iron frame 35x35x3mm thick including hings, handles, 8 Nos hold fast and locking arrangement along with lock and key of standred make primer two coat with redoxide paintcomplete and manhole cover fixed in storage tank/intake with cement concrete 1:1.5:3, nut & bolt and dismentalling of RCC work completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 82 | Providing and laying heavy duty precast cement concrete inter locking paver blocks 60mm thick with chamferred edge vibro completed up to M-50 grade of NTC or equivalent make i/c border or kurb block gray or coloured over sub-base of concrete with 25 mm thick average thickness of cement mortar 1:4 (1 cement, 4 Sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete in all leads and lift as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 83 | Laying, jointing & testing of G.I pipe of following dia (light class)for outlets pipe &scour pipes etc. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. (Labour rate) |
| 84 | 100 mm dia |
| 85 | Laying, jointing and testing in trenches (to level or grade) of following dia Medium Class GMS pipes plain ended jointed with 5% flanged & remaining butt weld joints with of below diametreconforming to IS 1239-1990 (Part - I ) with latest upto date amendments of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in randum length 4m-6m with plain ends and jointed with butt welding with electrodes as per IS 814-1991. The welding of joint to be done to make the joints leak proof (Earth work, flanged joints & butt welding joints to be mearsured and paid separately) and toentire satisfaction of the Engineer-in-Charge.The laying of pipes conform to IS 5822-1994 and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respect. (L.R.) |
| 86 | 125mm dia Medium Class |
| 87 | Providing and welding M.S. flanges at suitable point, conforming to following tables as per IS 6392-1971 (Latest with up to date amendments)with plain end GMS pipe in three layers on both faces to make the joint leak proof (The cost oflaying of GMS pipes to be measured and paid for separtely). The welding of flanges should conform to IS 816-1969 with electrodes as per IS: 814-1991 and required number of nuts and bolts conforming to IS 1364, the thicthness of gasket not less than 3.00 mm conforming to IS 2712-1998. The work shall be done as per entire satisfactio of engineer in charge with in all leads and lifts. |
| 88 | M.S. Flange joint 125 mm dia Table-17 |
| 89 | Providing circumferencial Butt welded joints by electrical arc welding to following diaGMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. |
| 90 | 125 mm dia |
| 91 | Providing and fixing double flangedCast Ironsluice valveof following dia of Kirloskar/Leader/RG/LP/Kartar/Suchdeva or any other approved make conforming to IS:14846/2000with up to date amendment as per Class PN-1 to withstand in normalseat pressure including welding with M.S. flanges table as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-Charge. |
| 92 | 100mm dia Medium Class |
| 93 | 125mm dia Medium Class |
| 94 | Providing and fixing double flangedCast Ironreflux valveof following dia of Kirloskar/Leader/RG/LP/Kartar/Suchdeva or any other approved make conforming to IS:5312with up to date amendment as per Class PN-1capable of with standing in normalseat pressure of 16.32 Kg/cm² including welding with M.S. flanges as per IS 6392-1971 including carriage in all leads and lift as per direction and to the entiresatisfaction of Engineer-in-Charge. |
| 95 | 125 mm dia |
| 96 | Providing and laying Duro stone vetrified tiles (600x600mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. |
| 97 | Providing and fixing 10mm thick anti skidwaterproofstainandimpect resistent heavy duty vetrified tiles Nitco or equivalant 300x300mmx10mmmanufacturedof approvedshadeandcolourin flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade oftilesas required complete. |
| 98 | White glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1 cement : 3 sand) and joined with cement slurry. |
| 99 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 100 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface |
| 101 | Painting two coats (excluding priming coat) on concrete/masonry/asbestos cement/plastered surfaces under coat with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required with:Paint other then white |
| 102 | Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with Ready mixed paint brushing wood primer . |
| 103 | Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:--Readymixed paint other than white |
| 104 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size within all leads and lifts, including all incidental charges |
| 105 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 106 | Cera Make EWC One Piece LYS-WHT |
| 107 | Providing and fixing Chromium plated mild steel Pillar Cock - Cera Make Fonte type. |
| 108 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. mild steel pillar taps, 32 mm C.P. mild steel waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 109 | White Vitreous China Wash basin size 630x450 mm with pedestal |
| 110 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outletconnection, 15mm nominal bore ball valve and mosquito proof PVC cover with lockingarrangement including hoisting up to all heights above ground level :-1000 litres net capacity tank Syntax make |
| 111 | Providing and fixing 600mm x 450 mm bevellededgemirrorofsuperiorglass mounted on 6mm thick A.C. Sheet or plywoodsheetandfixedtowoodenplugswithC.P. mild steel screws and washers. |
| 112 | ProvidingandfixingC.P.mild steelTowelrail completewithC.P.mild steelbracketsfixedto wooden plugs with C.P. mild steel screws :-750mm x 20mmm |
| 113 | Providing and fixing 600mm x 200 mm glass shelfwithC.P.mild steelbracket andguard rail complete,fixedtowoodenplugswithC.P.mild steel screws. |
| 114 | Providing & Fixing to wall, ceiling & floor , galvanised milt steel tubes (Heavy Class) , tube fittings & clamps i/c making good the wall, ceiling & floor. |
| 115 | 20mm dia Nominal Bore TATA Make |
| 116 | 15mm dia Nominal Bore TATA Make |
| 117 | Providing and fixing liquid soap container with C.P. mild steel lid and brackets fixed to wooden plugs with C.P. mild steel screws :-Plastic container |
| 118 | Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. |
| 119 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 75mm Nominal bore |
| 120 | Providing and fixing C.P. mild steel angle valve 15mm without Nuts and pipe |
| 121 | Providing and fixing chromium plated mild steel soap dish with C.P. mild steel brackets fixed to wooden cleats with C.P. mild steel screws. |
| 122 | Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and joined with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) 60 mm thick. |
| 123 | Providing and fixing vitreous china wash down water closet (European type W.C. Pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) (seat and cover to be measured and paid for separately) |
| 124 | Providing and fixing 100 mm size P or S trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1 cement :1 sand) Vitreous china |
| 125 | Providing and fixing 10.0/12.50/25.00 litres vitreous china low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fittings such as lead valve less syphon 15mm nominal size brass valve with polythene float, C.P. brass handle unions and couplings for connections with inlet, outlet and overflow pipes 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) |
| 126 | Providing and fixing vitrous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings550mm X 400 mm |
| 127 | Providing and fixing PVC Pipe 100 mm dia complete. |
| 128 | Providing and Fixing to wall ,ceilling and floor galvanised mild steel tube , fitting and clamps includingmaking good the same ic.c. wall, ceiling and flooring 15mm |
| 129 | Providing and Fixing PVC water storage tank complete in all respect.1000 ltrs capacity |
| 130 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C |
| 131 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 132 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- |
| 133 | 4 modules(140mmx78mmx50mm) |
| 134 | 6 modules(205mmx78mmx50mm) |
| 135 | 8 modules (120mmx135mmx60mm) |
| 136 | 12 modules (205mmx135mmx60mm) |
| 137 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 138 | 2x1.5 Sq. mm. |
| 139 | 2x2.5 Sq. mm. |
| 140 | 2x4.0 Sq. mm. |
| 141 | Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cablefor earthing wire from MCB box to main pannel board. |
| 142 | Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessedPVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar. |
| 143 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 144 | S.P. 5/ 6 Amps one way Modular switch. |
| 145 | 5 pin, 5/ 6 Amps Modular socket outlet. |
| 146 | Bell push, Modular. |
| 147 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 148 | S.P. 15/ 16 Amps one way Modular switch |
| 149 | 6 pin,15/16 Amps Modular socket outlet. |
| 150 | Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 151 | Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 152 | Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required. |
| 153 | Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required. |
| 154 | Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 155 | Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required. |
| 156 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, \"C\" curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:- |
| 157 | Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:- |
| 158 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, \"C\" curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:- |
| 159 | Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 160 | Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP,on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. |
| 161 | Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required. |
| 162 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 163 | Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. |
| 164 | Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run) |
| 165 | Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run) |
| 166 | Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required. |
| 167 | Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, Armoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights. |
| 168 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connectionrods 18\" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A) |
| 169 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A |
| 170 | Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. |
| 171 | Providing and fixing 1x36 watt-LED (Category-A)surface mountingfixture Syska/Havells make |
| 172 | Providing and fixing 6 watt. Recessed down lights round shape for falce ceilings complete. |
| 173 | Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A) |
| 174 | Providing, Installation, testing and commissioning of tube fitting 1x20W LED coplete in all respect. |
| 175 | Providing and fixing Mirror light 60 cms long 6 watt LED fixture. |
| 176 | Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required |
| 177 | Supplying and fixing 9 watt.LED bulbs. |
| 178 | Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required. |
| 179 | Supplying and fixing bakelite batten/angle holder including connections etc. as required. |
| 180 | Supplying and fixing of integral LED. Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CFL 26 watt. |
| 181 | Supplying and fixing of integral LED BOUNDARY WALL lights fixed over GI pipe polls 1.20mtr ht. 50 mm dia,9 watt LED lamp with 200 mm dia globe made of acrylic sheet complete |
| 182 | Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required. |
| 183 | Supplying and fixing 12 unit intercome exchange with phone sets and wiring complete. |
| 184 | Construction,testing and commissioning of water treatment plant 0.96 MLD in shape of Rapid Sand Filter bed and allied units :-The scope of work includes the construction of 0.96 MLD WTP capacity water treatment plant capable to treat the raw waterof the quality specified in the basic design data to produce clear water as per the requirements of CPHEEO manual on water supply and treatment and as specified in basic design data. The water treatment plant shall include the construction of inlet chamber, raw water tank, presettling tank, V-notch, Flash mixer, alum solution/mixing tanks and dosing arrangement, clariflocculator, settling tanks, rapid sand filters complete with back wash arrangement, clear water tank, complete disinfection arrangement with bleaching power, plant building( for housing chemical store cum dosing room, water testting laboratory cum attendent room(toilet), supply of laboratory requirement,Electro Mechanical equipments,piping, valves mechanical/ electrical equipment, electric wiring & panel boards, sanitation, interconnecting paths, site development upto a minimum of 3m from edge of battery limit of plant i/c retaining and breast walls and fencing.The firm shall submit the detailed hydraulic and structural design and drawings( 6 copies) for each component of treatment plant which shall be approved by the department before the work is started. The design/ drawings and bearing capacity of soil i/c detailed survey and investigation of the mechnical/ electrical equipment & wiring etc. along with manufacturers specificattion/ design also be submitted for approval by the department. On the completion of all civil, mechnical and electrical works the contractor shall test run the plant for three months (90 days ) before handing over the same to the department at the cost of the contractor. However, electrical chareges shall be borne by the department. During this period the contractor shall run the plant at full rated capacity and produce the resuslts specified in the NIT as per the CPHEEO standards in the presence of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Oct 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender