Tender For Modrob Consumables
Tender Overview
Project Description
Modrob Consumables Supply Of Modrob Consumables , Current Probe I310s Electrical Characteristics >? Current Ranges: 30 A And 300 A Ac Rms Or ±45 A And 450 A Dc >? Measuring Ranges: ±45 A And 450 A Dc >? Ac Rms Or Dc :±45 A And 450 A >? Inrush Current: 600A Ac Rms Max >? Output Sensitivity:10 Mv / A ( 30 A ) 1 Mv / A ( 300 A ) >? Accuracy ( At +23°C ) : ( 30 A Range ) And ( 300 A Range ) >? Bandwidth To Meet Accuracy Specification: 1 Khz >? Phase Shift Below 1 Khz:< 2 Degrees >? Resolution:±50 Ma ( 30 A ) ±100 Ma ( 300 A ) >? Load Impedance: > 10 K Ohms And=100 Pf >? Conductor Position Sensitivity: ±1.5% Relative To Centre Reading >? Frequency Range ( Small Signal ) : Dc To 20 Khz ( -3 Db ) >? Phase Shift Below 1 Khz :0 < 2° >? Temperature Coefficient: ±0.1% Of Reading / °C >? Power Supply: 9 V Alkaline, Mn1604 / Pp3 >? Battery Life: 30 Hours, Low Battery Indicator >? Working Voltage: 300 V Ac Rms Or Dc General Characteristics >? Maximum Conductor Size: 19 Mm Diameter >? Output Connection: Safety Bnc Connector Supplied With Safety 4Mm Adaptor >? Output Zero: Manual Adjust Via Thumbwheel >? Cable Length: 2 Metres >? Operating Temperature Range:-10 To +50°C >? Storage Temperature Range ( With Battery Removed ) : -20 To +85°C >? Operating Humidity: 15% To 85% ( Non-Condensing ) >? Weight: 250 G >? Safety:Iec 61010-1, Pollution Degree 2, Iec 61010-2- 032: Cat Iii 300V, Use Of The Probe On Uninsulated Conductors Is Limited To 300 V Ac Rms Or Dc And Frequencies Below 1 Khz. >? Emc Compatibility: Iec 61326-1: Portable Electromagnetic Environment , Attenuation Passive Probe 10:1 >? Bandwidth: Dc To 350 Mhz ( @10:1 ) , Dc To 10 Mhz ( @1:1 ) >? Attenuation Ratio: 10:1 / 1:1 >? Input Resistance: 10 M? ( @10:1 ) , 1 M? ( @1:1 When Terminated To 1M? ) >? Input Capacitance: 11Pf ( @10:1 ) , 60 Pf ( @1:1 ) >? Maximum Input: 300 Vrms ( Or >400Vpk ) Cat I / Ii ( @10:1 ) , 150 V Rms Cat I / Ii ( @1:1 ) >? Cable Length: 1.0 M , Cro Probe 300 Vrms, Frequency Range 100Khz, 1 Meter Length , Multistrand Copper Wire 1.0 Sqmm , Multistrandcopper Wire 2.5 Sqmm , Mcb 2 Pole Ac230volts, 6Amps , Single Phase Bridge Rectifier Unit Ac230volts, 35 Amps With Heat Sink , Siliconcontrol Rectifier ( Tyn612 ) Ac 600Volts, 12Amps , Metal Oxide Semiconductor Field Effect Transistor ( Irf 840 ) Dc 500 Volts, 8Amps , Insulated Gate Bipolar Transistor ( 25N120 ) Dc 1200 Volts, 25 Amps => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Current Probe i310s Electrical Characteristics>? Current ranges: 30 A and 300 A AC rms or ±45 A and 450 A DC>? Measuring ranges: ±45 A and 450 A DC >? AC rms or DC :±45 A and 450 A>? Inrush current: 600A AC rms MAX>? Output sensitivity:10 mV/A (30 A) 1 mV/A (300 A)>? Accuracy (at +23°C): (30 A range) and (300 A range) >? Bandwidth to meet accuracy specification: 1 kHz>? Phase shift below 1 kHz:< 2 degrees>? Resolution:±50 mA (30 A) ±100 mA (300 A)>? Load impedance: > 10 k Ohms and=100 pF>? Conductor position sensitivity: ±1.5% relative to centre reading>? Frequency range(small signal): DC to 20 kHz (-3 dB)>? Phase shift below 1 kHz :0 < 2°>? Temperature coefficient: ±0.1% of reading / °C>? Power supply: 9 V Alkaline, MN1604/PP3>? Battery life: 30 Hours, low battery indicator>? Working voltage: 300 V AC rms or DCGeneral Characteristics>? Maximum conductor size: 19 mm diameter>? Output connection: Safety BNC connector Supplied with safety 4mm adaptor>? Output zero: Manual adjust via thumbwheel>? Cable length: 2 metres>? Operating temperature range:-10 to +50°C>? Storage temperature range (with battery removed): -20 to +85°C>? Operating humidity: 15% to 85% (non-condensing)>? Weight: 250 g>? Safety:IEC 61010-1, Pollution Degree 2, IEC 61010-2- 032: CAT III 300V,Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.>? EMC Compatibility: IEC 61326-1: Portable Electromagnetic Environment |
| 2 | Attenuation passive probe 10:1>? Bandwidth: DC to 350 MHz (@10:1), DC to 10 MHz (@1:1)>? Attenuation ratio: 10:1/1:1>? Input resistance: 10 M? (@10:1), 1 M? (@1:1 when terminated to 1M?)>? Input capacitance: 11pF (@10:1), 60 pF (@1:1)>? Maximum input: 300 VRMS (or >400Vpk) CAT I/II (@10:1), 150 V RMS CAT I/II (@1:1)>? Cable length: 1.0 m |
| 3 | CRO probe300 VRMS, Frequency range 100KHz, 1 Meter length |
| 4 | Multistrand Copper wire1.0 Sqmm |
| 5 | MultistrandCopper wire2.5 Sqmm |
| 6 | MCB 2 Pole AC230Volts,6Amps |
| 7 | Single Phase Bridge Rectifier unitAC230Volts,35 Amps with heat sink |
| 8 | SiliconControl Rectifier(TYN612)AC 600Volts, 12Amps |
| 9 | Metal Oxide Semiconductor Field Effect Transistor(IRF 840)DC 500 Volts, 8Amps |
| 10 | Insulated Gate Bipolar Transistor (25N120)DC 1200 Volts, 25 Amps |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender