Ayodhya Municipal Corporation has published Construction Of Park Work. Submission Date for this Tender is 31-10-2022. Gardening Tenders in ayodhya Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Oct-2022 | Date | Date | 24-10-2022 |
| 2 | 21-Oct-2022 | Date Extend | Date | 31-10-2022 |
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan), including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m,as per directions of Engineer in Incharge. 2.6.1 All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up toplinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 3 | Supply and Erection of Precast RCC Panel fabricated with M25 Grade Mix including Columnof specifications such as thickness of panel-40mm, Size of Panel- 1.8m x 0.3m, Column Size 140mm x 140 mm with grooves of 40mmx50mm on both sides upto 1.5m above G.L and 0.6 m below G.L without grooves inserted in Lean Concrete of size 0.45mx0.45mx0.60m. |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m. |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 7 | Revolving gate - Centre pol 65mm, 16 gauge, 3 arms in 32mmX4mm filled with 10 mm solid rods by maintaining a gap of 3” including moving mechanism all complete. |
| 8 | Main gate - Frame 16 gauge, chool set solid 40mmx40mm, 10mm solid rods, frame angle 32mmx4mm, weight est. 130 kg, size -10’x6’ |
| 9 | S/F of sign board at site all complete |
| 10 | Pathways |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan), including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m,as per directions of Engineer in Incharge. 2.6.1 All kinds of soil |
| 12 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 14 | Construction of granular Sub base by providing well graded materials, spreading in uniform layers with motor prepared on graded surface mixing bymixin place method with rotavator at OMC and compacting with smoothw roller toachive the desire density complete as technical specification, Class 401(Rate checked by PWD) |
| 15 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer"s specifications & direction of Engineerin-80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 16 | Horticulture works |
| 17 | Supply of Plants all complete |
| 18 | Turffing of grass after preparation of ground by digging area to a depth of .6 m breaking clots remo’ing weis and racks vegetation including proper sloping of land (with supply of manure grass etc) all complete as pex direction of Engineer in-charge |
| 19 | Earth Work cutting & filling in ordinary soil all complete |
| 20 | Plantation of Ornamental traditional & flowering tree pIants Shurbs, creepezs Excluding supply of plants manure T&P etc required for proper completion of the work (size 6x6x6m) |
| 21 | Light Work |
| 22 | 12.5 Mtrs. High Mast Tower Polygonal Shapes. Suitable For 6 luminaries for Wind Speed up to 180 Km/hr. As per IS -875 Parts -3 Material Cons.: BSEN 10025 # Mechanical Components including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries and C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.etc. # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts and Bolts. # Foundation Accessories. # Single drum Winch Assembly Mast bottom Dia: 250 mm. Top : 125 mm, Thk: 4/3 mm, PCD: 350 , base plate: 350 mm X 20 mm FOUNDATION BOL,T M25 750 MM 6 NOS HIGH MAST FEEDER PILLAR PANEL BOX 1 NOS 150 WT LED FLOOD LIGHT 6 NOS HIGH MAST INSTALLATION |
| 23 | Solar lights - Specifications - Number of LED 224, LED power - 120 W, with Battery - 3.2 Volt 20 ah po4, charging time - 7 to 8 hours, lighting time -2 nights, Sensor - Induction motion, with GI Pole size - 5 meter |
| 24 | Galvanised steel barbed wire of 9.8 kg /100metre |
| 25 | Benches |
| 26 | Supply & installation of 3 seater stone park benches |
| 27 | ADD CESS |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
