Tender For Mattress, Bhopal-Madhya Pradesh

Bids Are Invited For Mattress -1 Providing And Placing Of Executive High Back Chair ; , The High Back Chair Should Be Made Up Of 1.2 ±O.1Cm. Thick Hotpressed Plywood And Upholstered With-Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Is Designed With Contoured Lumber Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Confort To Popliteal Area. The High Back Size Is 47 Cm W X 69.5Cm H And The Seat Size Is 47 Cm W X 48 Cm D. The Hr Pu Foam Is Moulded With Density 45+-2 Kg / M Cube And Hardness Load 16 +- 2 Kgf As Per Is:7888 Fof 25% Compression. The One Piece Armrest Are Injection Moulded From Black Co Polymer Pp 2 Providing And Placing Of Executive High Back Chair Leatherite. : The Cushioned Seat Is To Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Shall Be Upholstered With Leatherette And Moulded High Resilience ( H R ) Polyurethane Foam Of Density 45+ / -2Kg / M Compression. Seat Size Should Be 47.0 Cm ( W ) X 48.0Cm ( D ) .The Cushioned Back Is To Be Made Of Pu Foam With Insitu Molded Ms E.R.Wround Tube Of Size 1.9+ / -0.03Cm X 0.16+ / -0.0128Cm. Duely Upholstered With Leatherette. The High Back Should Be Of Size 47.7 Cm ( W ) X 76.4 Cm. ( D ) . The Armrest Top Should Be Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjusted Type Tubular Armrest Support Made Of 3.81+ / -0.03Cm X 0.2+ / -0.01Cm Thk M.S E.R.W Tube Having Chrome Plated Finish. The Armrest Height Shall Be Adjustable Up To 6.5+ / 0.5Cm In 5 Steps. Mechanism Should Be Active Bio - Synchro Mechanism. The Adjustable Tilting Mechanism Is To Be Designed With The Following Features:It Should Be 360D Revolving Type.Front Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring Morecomfort. Tilt Tension Adjustment Can Be Oprated In Seating Position. 5-Position Tilit Limiter Give Option Of Variable Tilt Angle To The Chair.Seat / Back Tilting Ratio Is Of 1 : 2. 3 Providing And Placing Of Mid Back Chairs : The Chair Having Seat / Back Assembly Made Up Of 1.2 ±O.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method And Upholstered With-Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam To Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Should Have Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size Should Be 47.5 Cm. ( W ) X 58.0 Cm. ( H ) - Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) . The Chair Should Have High Resilience ( Hr ) Polyurethane Foam.Moulded With Density =45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression And Armrests Which Are One-Piece Injection Moulded From Black Co. Polymer Polypropylene. The Chair Should Have Centertilt.Synchro Mechanism With The Following Features:• 3600 Revolving Type.• Upright-Position Locking • Tilt Tension Adjustment • Seat / Back Tilting Ratio Of 1:3 4 Providing And Placing Of Executive Visitor Fixed Chair : The Chair Should Be Of Size 60.9 ( W ) X 64.2 ( D ) 98.2Cm Cushioned Seat Is To Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Shall Be Upholstered With Leatherette And Moulded High Resilience ( H R ) Polyurethane Foam Of Density 45+ / -2Kg / M Compression. Seat Size Should Be 47.0 Cm ( W ) X 48.0Cm ( D ) .The Cushioned Back Is To Be Made Of Pu Foam With Insitu Molded Ms E.R.Wround Tube Of Size 1.9+ / -0.03Cm X 0.16+ / - 0.0128Cm. Duely Upholstered With Leatherette. Mechanism - The Tubular Frame Shall Be Cantilever Type & Made Up Of 02.54+ / - 0.03Cm X 0.2+ / -0.016Cm Thk S.S 202 Tube. The Back Connect To Frame Through Chrome Platedhigh Pressure Die Cast Connector Piece. 5 Providing And Placing Of Fixed Visitor Chair : The Seat And Back Are To Be Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size Should Be 49.0Cm. ( W ) X 47.0Cm. ( H ) , Seat Size Should Be 49.0Cm. ( W ) X 44.0Cm. ( D ) The Polyurethane Foam Shall Be Moulded With Density = 45 + / -2 Kg / M3 And Hardness = 20 + / - 2 On Hampden Machine At 25% Compression. Armrests: The Armrest Tops Shall Be Injection Moulded From Black Polypropylene. They Are Fitted To Tubular Armrest Supports Made Of Dia.2.54Cm. ( 1” ) X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. The Tubular Armrest Supports Hold Together The Seat And Back The Tubular Frame Should Be Cantilever Type & Made Of Dia.2.54Cm. ( 1” ) X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge 6 Providing & Placing Of 2 Seater Sofa : It Should Be Made Of Pine Wood And 12 Mm Plywood ( Is-303, Commercial Plywood ) Frame, Upholstered With Pvc Upholstery ( 0.9 Mm Thickness, Weight – Gsm - 575 ) In Black Color. The Slabstock Foam Used Has To Be Soft For Comfort Seating. Seat Foam Thickness To Be 69, 22, 10 Mm With Density Of 26 Kg / M3. Back Foam Thickness To Be 45 Mm With Density Of 28 Kg / M3. Armrest Foam Thickness To Be 45 Mm With Density Of 26 Kg / M3.Belt / Webbing Material To Be 68 Mm And 48 Mm Wide. Plastic Legs To Be Fitted Along With Pvc Bushes. Diamension Shoud Not Be Less Than Two Seater Overall Size: 150.0 Cm ( W ) X 82.0 Cm ( D ) X 90.0 Cm ( H ) X 43 Cm ( Sh ) . Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) 7 Providing & Placing Of 3 Seater Sofa : It Should Be Made Of Pine Wood And 12 Mm Plywood ( Is-303, Commercial Plywood ) Frame, Upholstered With Pvc Upholstery ( 0.9 Mm Thickness, Weight – Gsm - 575 ) In Black Color. The Slabstock Foam Used Has To Be Soft For Comfort Seating. Seat Foam Thickness To Be 69, 22, 10 Mm With Density Of 26 Kg / M3. Back Foam Thickness To Be 45 Mm With Density Of 28 Kg / M3. Armrest Foam Thickness To Be 45 Mm With Density Of 26 Kg / M3.Belt / Webbing Material To Be 68 Mm And 48 Mm Wide. Plastic Legs To Be Fitted Along With Pvc Bushes. Diamension Shoud Not Be Less Than Two Seater Overall Size: 188.0 Cm ( W ) X 82.0 Cm ( D ) X 90.0 Cm ( H ) X 43 Cm ( Sh ) . Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) 8 Providing And Placing Of 6 Seater Meeting Table : Work Top To Be Made Up Of 25Mm Thick Mdf-One Side Pre-Laminate Board Conforming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top And Having Chamfered Edge. Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables. Understructure - The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics.The Product Has A Knock-Down Construction. Wire Management - A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables ( Eg. Hdmi, Vga-A, Etc ) . Size - 2100 X 1150 Furniture Make- Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge 9 Providing And Placing Of Quilted Bonded Foam Mattress : The Mattress Shall Be Of Size - 1829 X 1829 X 100 Mm.The Mattress Should Be Made Of Bonded Foam Thickness 25 Mm & The Bonded Is Of 90 Density ( Kg / M3 ) .Pu Foam Sheet Thickness: 75 Mm, Pu Foam Sheet Density: 28 Kg / M3. Quilting Should Be Done On Single Side Of Mattress , Top Foam Quilting Should Be 18 Mm Thick Of 18 Density Foam. Bottom Foam Quilting Should Be 20 Mm Thick And Of 18 Density Foam. Total Thickness Of Mattress 110Mm + / - 5Mm. Side Boarder Quilting Shall Be Of 5Mm Foam Of 18 Desnisity, Edges Should To Round Fabric Beige Of 240 ( Non Wooven ) Atul Textile. Along With Pure Cotton Fabric Bed Sheet With Two Pillow Cover. Approved Make - Godrej ( Greenguard / Bifma Certified Co. ) 10 Providing And Placing Of Quilted Foam Mattress : The Mattress Shall Be Of Size - 1829 X 889 X 100 Mm.The Mattress Should Be Made Of P.U Foam Thickness 45 Mm 32 Density ( Kg / M3 ) . Pu Foam Sheet Thickness: 45 Mm, Pu Foam Sheet Density: 28 Kg / M3. Quilting Should Be Done On Single Side Of Mattress , Top Foam Quilting Should Be 18 Mm Thick Of 18 Density Foam. Total Thickness Of Mattress 108Mm + / - 5Mm. Side Boarder Quilting Shall Be Of 5Mm Foam Of 18 Desnisity, Edges Should To Round Fabric Beige Of 240 ( Non Wooven ) Atul Textile Along With Pure Cotton Fabric Bed Sheet With Single Pillow Cover. Approved Make - Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge. Providing And Placing Of Pillow : Pillow Should Made Of Siliconized Fibre Of And Cover Should Be Of Cotton / Poleyster Fabric Duely Switched Size 16 X 23 Make - Godrej ( Greenguard / Bifma Certified Co. ) Design As Approved By Engineer-In-Charge.

Refer document

Refer document

Refer document

Sl. No.	Item Title	Item Description
1	ITEM NO.1	ITEM NO.1
2	ITEM NO.2	ITEM NO.2
3	ITEM NO.3	ITEM NO.3
4	ITEM NO.4	ITEM NO.4
5	ITEM NO.5	ITEM NO.5
6	ITEM NO.6	ITEM NO.6
7	ITEM NO.7	ITEM NO.7
8	ITEM NO.8	ITEM NO.8
9	ITEM NO.9	ITEM NO.9
10	ITEM NO.10	ITEM NO.10
11	ITEM NO.11	ITEM NO.11