Retrofitting Of Pipe Water Supply Scheme Old Bhampur Tal Shirpur Dist Dhule
Tender Value
61.63 Lakhs
Estimated cost
Bid Submission
18 Oct 2022
0 days left
EMD
61637
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shirpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting Of Pipe Water Supply Scheme Old Bhampur Tal Shirpur Dist Dhule
BOQ
| Sl. No. | Item Description |
| 1 | S.W. No. 01:- Pur Water Pumping Machinery (12.5 HP 1W +1S)Item No.1: - Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for 64m delivery head and discharge of 4.90 LPS with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 80mm width, 150mm Dia thick shall be provided with each pump.12.5 HP Submersible Pump Set |
| 2 | Item No.2:-Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. 80 mm Dia. |
| 3 | Item No.3: - Providing & fixing of M.S. clamps for holding 80 mm dia G.I. pipe. |
| 4 | Item No.4:- 3 core PVC insulated, PVC sheathedcopperconductor flat submersible cable Supplying and erecting, Flat flexible submersible cable with, Copper Conductor, PVC insulated, and PVC sheathed.(3 core 10 sq mm) |
| 5 | Item No.5:- Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE |
| 6 | Item No.6:- Making trench in soft soil of suitable width & depth for laying provided L.T cable up to 10 sq.mm complete.As per specification No. CW-EXN-CTR |
| 7 | Item No.7: - Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser.7.5 HP Pump |
| 8 | Item No.8:-Providing tools for pumping machinary |
| 9 | Item No.9:- Aluminium conductor 4 Core, XLPE / PVC insulated & armoured cableSupplying and erecting, XLPE / PVC insulated, annoured cable 1100 V grade with ISi mark Four core, solid/ stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer withG.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner. |
| 10 | Item No 10:- Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 11 | Item No 11:- EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 12 | Item No 12:- Providing & fixing 100 mm dia. Pressure gauge. |
| 13 | S.W. No. 02:- PURE WATER RISING MAIN OF HDPE 6 Kg 80 mmItem No.1:- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 90 mm HDPE 6 Kg/ sqm |
| 14 | 110 mm HDPE 6 Kg/ sqm |
| 15 | 125 mmHDPE 6 Kg/ sqm |
| 16 | 140 mm HDPE 6 Kg/ sqm |
| 17 | Item No.2:- ProvidingG.I./P.V.C/HDPESpecialsasperstandard specifications&directionofinchargeEngineer.(10%of Item No.1,2&3) |
| 18 | Item No.3:- Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991. 80 mm Dia. sluice valve |
| 19 | 125 mm Dia. sluice valve |
| 20 | Item No 4:- Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984) 80 mm dia. |
| 21 | 125 mm Dia. e valve |
| 22 | Item No 5:- Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. 32 mm dia. |
| 23 | Item No.6:-Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 24 | Item No.7:-Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 25 | Item No.8:-Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 26 | Item No.9 :- Filling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 27 | Item No.10:-Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 90 mm Dia HDPE Pipe 6 Kg/sqcm |
| 28 | 110 mm HDPE 6 Kg/ sqm |
| 29 | 125 mmHDPE 6 Kg/ sqm |
| 30 | 140 mm HDPE 6 Kg/ sqm |
| 31 | Item No 11:- Lowering laying and jointing inposition following C.I.D/F Reflux valves Butterfly valves and sluice valves including cost of all labour joining material, including not bolts and givingsatisfactoryhydraulictestingetc.complete.(Rate for all class of sluice valves)80 mm Dia |
| 32 | 125 mm Dia |
| 33 | Item No 12:- Lowering,Laying andfixing inproper alignmentand position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. 32 mm Dia. |
| 34 | Item No 13:- Providing and fixing in position air valve shaft including providingand fixing GI Medium class or 6mm thick M.S, PIPE shaft 2.70m long over branch flange of air valve tee providing PCCblock of M- 150concrete 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged ionts wherver required and fixing of air valve over the shaft excluding cost of air vavle and branch flanged air valve tee, etc. complete as per type desihn and as per directed by Engineer - in -charge for following diameters of pipe line32 mm Dia. |
| 35 | Item No.14 :- Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc complete with initial lift of 1.50m below /above ground level. |
| 36 | Item No 15:- Providing & costructing B.B masonry valve chamber with 15 cm thick 1: 3 :6 proportion PCC bedding ,excluding excavation ,B.B masonry in C.M 1:5 proportion precast RCC frame and cover etc. complete as directed by Engineer-in-charge Size 0.90 x 0.60 x 1.20 |
| 37 | Item No.16 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 38 | Item No 17:- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.90 mm Dia.6 Kg/Sqcm |
| 39 | 110 mm HDPE 6 Kg/ sqm |
| 40 | 125 mmHDPE 6 Kg/ sqm |
| 41 | 140 mm HDPE 6 Kg/ sqm |
| 42 | Item No 18:- Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.80 mm Dia. |
| 43 | 125 mm Dia. |
| 44 | Item No 19:- Rectification of leakages during the work of Rising main & distribution system including necessary Excavation, refilling Lowering laying ,jointing of pipe, including cost of pvc pipe,couler etc comp. |
| 45 | S.W. No. 03:- RCC ESR cap. 30000 Lit. 12 m Staging Item No 1:- Designing (aesthetically) and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5M. Centre to centre for ESR having capacity upto 500cum and not more than 6 m. c/c for ESRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 M. all labour and material charges including lowering, laying, erecting,, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental desing, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers water level indicatiors, lightening conductor, G.I. pipe railing around walk 30000 Lit. Cap. |
| 46 | Item No.2:- Providing & supplying ISI standard CI double flanged pipes100 mm Dia. cIDF Pipe For inlet |
| 47 | Item No 3:- Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 48 | Item No.4:- Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle capsincluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect , transportation etc complete. complete. 100 mm dia. CIDF Sluice Valve |
| 49 | S.W. No. 04:- Distribution System Item No.1:- ProvidingISImarkG.I.Pipeoffollowingclassanddia. Includingalllocalandcentraltaxes,octroi,inspection charges, transportation to stores. etc. complete. GI Pipe 80 mm Dia M Class |
| 50 | GI Pipe 100 mm Dia M Class |
| 51 | Item No.2:- Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as perIS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). 75 mm Dia 4 Kg/cm2 |
| 52 | 90 mm Dia 4 Kg/cm2 |
| 53 | 110 mm Dia 4 Kg/cm2 |
| 54 | Item No.3: -Providing and supplying PVC/C.I/G.I. Specials. |
| 55 | Item No.4:- Providing, erecting, connecting double flanged short body pattern tye manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200generallyconforminginBS5155,Syntheticrubber faced ring secured on disc by retaining ring with stainless steelscrewstubshaftofstainlesssteelridinginTeflon bearings excluding C.C. foundation/ structural steel support confirming to IS 3095-1991.80 mm dia. CIDF Sluice Valve |
| 56 | Item No.5:- Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. 0.0 to 1.50. |
| 57 | Item No.6:- Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 58 | Item No.7:- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 59 | Item No.9:- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 60 | Item No.10:-LoweringLaying&jointingG.I.pipesandspecialsof followingclassanddiameterincludingconveyancefrom storestositeofworks,alllabour,givingsatisfactory hydraulictest,etccompleteeitherunderground orin vertical position, as directed by Engineer-in-charge. GI Pipe 80 mm Dia M Class |
| 61 | GI Pipe 100 mm Dia M Class |
| 62 | Item No.11:- Lowerig and laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material except cement solvent, rubber ring giving satisfactory hydraullic testing as per IS Code etc complete (with cement sovlentjoint / ring fit joint working pressure 4 Kg./Sqm.) 75 mm Dia 4 Kg/cm2 |
| 63 | 90 mm Dia 4 Kg/cm2 |
| 64 | 110 mm Dia 4 Kg/cm2 |
| 65 | Item No.12:- Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge . 80 mm dia. CIDF Sluice Valve |
| 66 | Item No.13:- Providing and laying in situ 1:2:4(M-150) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. |
| 67 | Item No.14:- Providing & costructing B.B masonry valve chamber with 15 cm thick 1: 3 :6 proportion PCC bedding ,excluding excavation ,B.B masonry in C.M 1:5 proportion precast RCC frame and cover etc. complete as directed by Engineer-in-charge60 x 45 x 90 cm |
| 68 | Item No.15:- Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. |
| 69 | Item No.16:HydraulictestingofG.I.pipelinetospecifiedpressure includingcostofallmaterialsandlabourandwaterfor testingforthelengthupto1kmusingreciprocatingtype pumpswhichshouldbeabletoprovidespecifiedtest pressure gauges and other necessary equipments,labour operationchargesetc.requiredfortesting,Therates underthisitemshallalsoincludecostofretestingif necessary and reinstating to original postion.GI Pipe 80 mm Dia M Class |
| 70 | GI Pipe 100 mm Dia M Class |
| 71 | Item No 17 :-Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.75 mm Dia. 4 Kg/cm2 |
| 72 | 90 mm Dia 4 Kg/cm2 |
| 73 | 110 mm Dia 4 Kg/cm2 |
| 74 | Item No 18 :-Providingandfixingboarddisplayinginformation, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", havingrectangularshapeof1.20mx0.90msize made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stoveenamelonbacksideandborder/messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65mlongpaintedwithalternateblackandwhite bandsof25cmwidthincludingallfixturesetc.and fixing the boards in1:4:8 concrete block of size 60 cm x60cmx75cmincluding,excavation,refilling, transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge MORTH 801 |
| 75 | Item No 19 :- Making cross connection to existing distribution main of any type including excavation, breaking and removing exiting pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line (the number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores).100 mm Dai |
| 76 | 80 mm Dai |
| 77 | S.W. No. 5:- Trial RunItem NO 1 :- Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period .For Single Village |
AI Tender Summary
Tender Timeline
Oct 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender