Construction Of Khalsa Sculpture In Ajay Ahuja Park Civil Works
Tender Value
13.79 Lakhs
Estimated cost
Bid Submission
11 Oct 2022
0 days left
EMD
27580
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Khalsa Sculpture In Ajay Ahuja Park Civil Works
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils |
| 2 | Random rubble dry stone Kharanja under floor. |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 4 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix |
| 5 | Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. |
| 6 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level. |
| 7 | Providing and Fixing CC Kerb Stone with Mandana Pigmented Colour size 450x300x150mm thick rubber moulded in Red colour. |
| 8 | Providing & fixingBanswara Whitestonemarble in PedestalFlooring Structuralbase with white cement & Tinex chemical,& SS Clamp and Fasteners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slabincluding rubbing, polishing with all lead & lift complete in all respect as per drawing attached and direction of Engineer- In- Charge & Architectt with all lead & lift. The Stone measurement will be done of outer most dimension. Thickness of stone 70-75mm. |
| 9 | Providing and Fixing Brown Kota/Mandana /Dholpur/Slate Stone/Jodhpur Beige or any Other stone in combination in cladding/flooring structural base with white cement and tinex chemical and SS Clamp and fasteners (of Approved Brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached complete in all respect as per direction of Engineer-in-Chage and Architect with all lead and lift. The Stone measurement and will be done of outer most dimension. Thickness of stone 25-30mm. |
| 10 | Fine grinded Gangsaw cut 30-35 mm thickstone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. Mandana stone |
| 11 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 12 | Flyash Flyash Brick work with flyash Flyash Bricks of class designation 75 in superstructure above plinth level upto floor Three Level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 13 | Providing & fixingBanswara Whitestone /Kesariya Green marble in Pedestal work over Structuralbase with white cement & Tinex chemical,& SS Clamp and Fasteners (of approved brand) inclusive of moulding,carving, rubbing, polishing complet,laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached with hairline joint at transition including rubbing, polishing and finishing, complete in all respect as per direction of Enginner & Architect with all lead & lift. The Stone measurement will be done of outer most dimension. |
| 14 | Providing & Fabrication of Khalsa Logo Design in Stainless Steel Sheet (1.5MM) thick (HSN-7219, Grade-304, MOC- Mirror Polish, Heigt-1860mm, Width-1570mm, Depth-50mm) as per Direction of Engineeri-in-charge |
| 15 | Add extra for latheride polish/ sand blast work on flooring as per direction of site engineer incharge & Architect. |
AI Tender Summary
Tender Timeline
Oct 08, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender