Military Engineer Services-MES has published Provision Of Pathway Covered With Cgi Sheet Storm Water Drainage System With Culvert Footpath 04 X Toilets For Hygiene Sanitation Additional 02 X Toilet And 02 X Bathroom At Near Jcos Mess To Hq Coy 3 Mahar Unit Area Of Works At Age Br Ii Under Ge 859. Submission Date for this Tender is 04-11-2022. Footpath Work Tenders in TENGA VALLEY Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Oct-2022 | CHANGE IN TENDER DOCUMENTS | Other | 28-10-2022 |
| 2 | 28-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-11-2022 |
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and getting out in hard/dense soil with complete all as specified and directed. |
| 2 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soilwith complete all as specified and directed. |
| 3 | M&L rough Excavation not exc 1.5 m deep and getting out in any type of soil with complete all as specified and directed. |
| 4 | M&L Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil with complete all as specified and directed. |
| 5 | Returning/filling in including spreading, levelling, watering and well remming in layers n.exc 25 cm in hard/dense soilwith complete all as specified and directed. |
| 6 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point with complete all as specified and directed. |
| 7 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified. |
| 8 | M&L for Sand filling under floors or in foundations for laying precast concrete interlocking tiles all as specified and directed. |
| 9 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed. |
| 10 | M&L for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, ridge, hips, valley gutters fixed with self tapping screws as specified Including dismantaling of existing sheet complete all as directed. |
| 11 | M&L for preparing new galvanised steel surfaces toapplying two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width or girth on steel surface with complete all as specified and directed. |
| 12 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil with complete all as specified and directed. |
| 13 | M&L for PCC 1:2:4, type B-2 (using 40mm graded stone agg) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts including caps and bases with complete all as specified and directed. |
| 14 | M&L RCC (Nominal mix) 1:2:4 , type B-1,(using 20 mm graded aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves with complete all as specified and directed. |
| 15 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with complete all as specified and directed. |
| 16 | M&L for cement concrete type D-2, 1:4:8in Cement concrete in foundations, filling and mass concrete with complete all as specified and directed. |
| 17 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings,staircase slab, cover slabs(for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces with complete all as specified and directed. |
| 18 | M&L PCC 1:3:6 typeC-1 using 20mm graded stone aggregate as in bond stone etc with complete all as specified and directed. |
| 19 | M&L for PCC 1:3:6,type C-2 ( 40mm graded stone agg) as in surface channels and drains.with complete all as specified and directed. |
| 20 | M&L for Use and waste flat form work to vertical faces of drain/retaining wall and similar workwith complete all as specified and directed. |
| 21 | M&L extra for forming fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc.complete all as specified and directed. |
| 22 | M&L Form work to soffit of suspended flat slabs such as roof slab n-exc 200mm thick (horizontal or sloping) with complete all as specified and directed. |
| 23 | M&L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item 07010) with complete all as specified and directed. |
| 24 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with complete all as specified and directed. |
| 25 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc with complete all as specified and directed. |
| 26 | M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface with complete all as specified and directed. |
| 27 | M&L for PCC 100mm thick, type D-2, 1:4:8 (using 40mm graded stone agg) in sub-floors, sub-base, floors and pavings etc with complete all as specified and directed. |
| 28 | M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement with complete all as specified and directed. |
| 29 | M&L rendering 10mm thick in CM 1:4on concrete inner surfaces finished even and smooth without using extra cement with complete all as specified and directed. |
| 30 | M&L rendering 15mm thick in CM 1:4on concrete outer surfaces finished even and smooth without using extra cementwith complete all as specified and directed. |
| 31 | M&L for Prepairing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as completed with complete all as specified and directed. |
| 32 | M & L for 350 x 250 x7 mm or 450x350x7mmthick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with complete all as specified and directed. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 33 | M & L for screed bed or bedding layer of 20 mm thick for laying floor finishes in CM (1:6 ) with complete all as specified and directed. |
| 34 | S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick any shape and size confirming to IS 15658-2006 with M- 35 GDE and 6mm top layers of ante abrasive rubberised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand and laying with grey cement and no pigment . The compressive strength of layer shall not be less than 350 Kg/Cm2 with complete all as secified and directed by Engr-In-Charge. |
| 35 | M&L forProviding, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as secified and directed by Engr-In-Charge. |
| 36 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces etcset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with complete all as specified and directed. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval ofcolour and pattern of tile by GE/Engr-in-charge. |
| 37 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingwith complete all as specified and directed. |
| 38 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthtuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingwith complete all as specified and directed. |
| 39 | M&L for clean sawn Second class hard-wood in scantlings with complete all as specified and directed. |
| 40 | M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,for ventilators put together with glue pinned at joints, supplied and fixed with complete all as specified and directed. |
| 41 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded,mitred and rebated sash bars, any numbersfor ventilators etc are provided with stiles and rails as specified in SSR Part-1, section 8 clause 8.24(b) with complete all as specified and directed. |
| 42 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 43 | S&F MS window guard bars, window frames plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc articles confirming to Fe 290-0 or E-165 with complete all as specified and directed. |
| 44 | M&L for preparation of new or previously untreated surfaceofwooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with complete all as specified and directed. |
| 45 | S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixedwith complete all as specified and directed. |
| 46 | S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel, and fixedwith complete all as specified and directed. |
| 47 | S&F 150 mm longaluminium anodized, barrel tower bolts extruded sectionwith complete all as specified and directed. |
| 48 | S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated typewith complete all as specified and directed. |
| 49 | S&Fvitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed |
| 50 | S&F 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed |
| 51 | S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads,screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed with complete all as specified and directed. |
| 52 | S & Flooking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerswith complete all as specified and directed.(Make :Swastic /Kohinoor /Gold fish /Atul) complete all as specified and directed |
| 53 | Supply andfix chromium plated brass Bib taps,cast copper alloy with crutch or butterfly handle, screwed down for PP-R pipe for 15mm bore tubing complete all as specified and directed by Eng-in-charge. |
| 54 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors with complete all as specified and directed. |
| 55 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 56 | S&F PVC (SWR) bends any radius with access door, 110mm diawith complete all as specified and directed. |
| 57 | S&F PVC (SWR) bends any radius with access door, 75mm dia. |
| 58 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. |
| 59 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia75mm. |
| 60 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.. |
| 61 | S&F75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 62 | S&F in20mm outer dia 3-layer PP-R Polypropylene random copolymer)oncealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded random fittings fixed complete to walls, ceilings or in floors etc with complete all as specified and directed. |
| 63 | S&F in16mm outer dia 3-layer PP-R Polypropylene random copolymer)oncealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded random fittings fixed complete to walls, ceilings or in floors etc with complete all as specified and directed. |
| 64 | S&FPVC connection of 15 mm size withPTMT nuts of length 450 mm with complete all as specified and directed. |
| 65 | S&F Grating doom 100 mm dia withwaste hole of PTMT (mminium weight 25 gms) with complete all as specified and directed. |
| 66 | S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 67 | S & FVitreous China squatting pan, "Orissa" pattern, size 630 x450 mm white, with integral foot rest (excluding flusing cistern and flush pipe) with complete all as specified and directed. |
| 68 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 69 | S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets with flush pipe complete all as specified and directed. |
| 70 | S & F fancy type chromium plated 20mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 71 | S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified |
| 72 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed |
| 73 | S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 74 | S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified |
| 75 | S&F 25mm outerr dia PP-R Gate valves (brass insert) as per requirement of the site with complete all as specified and directed. |
| 76 | M&L for walling of random rubble uncoursed, well bonded,bedded and solidly hearted built in CM 1:6 complete all as specified and directed |
| 77 | Extra over stone walling for hammer dressing with maximum depression from straight edge held against the dressed surfaceto face beds and joints as specified of random rubble walling uncoursed or brought upto courses complete all specified and directed. |
| 78 | M&L for keyed pointing to random rubble masonry or brought upto course in cement mortar 1:4 complete all specified and directed. |
| 79 | M&L for Hand packing (any thickness )at back filling with broken stone or boulders complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
