Procurement Of Tools And Tackles For Regular Operation And Procurement Of Tools And Tackles For Regular Operation And Maintenance Of Hazira Compressor Station , Sling, Flat Webbing, Polyster, 2Ton X 3M , Sling, Flat Webbing, Polyster, 2Ton X 5.0M , Sling, Flat Webbing, Polyster, 10Ton X 10M , Flat Webbing Sling, Polyester, 1Tonx3m , Flat Webbing Sling, Polyester, 5Tonx6m , Flat Webbing Sling, Polyester, 5Tonx10m , Chain Pulley Blk, 1Ton, 20 Mtr. , Frame, Hacksaw, 300Mm , Blade, Hacksaw, 12X1 / 2In, Hss , File, Triangular, Smooth, 100Mm , Flat File Set, W / Handle, 10In, 3Nos , Round File Set, W / Handle, 10In, 3Nos , File, Needle, Set , Wrench, Hand Torque, 55-140Kgcf , Wrench Torque 135-780Nm, Length 1.1-1.5M , Plier, Circlip, Int, 125Mm , Plier, Circlip, Ext, 125Mm , Plier, Circlip, Internal, 6In , Plier, Circlip, External, 6In , Tap, Rh Npt, Hss, 1 / 8In , Tap, Hand, Hss, Rh Npt, 1 / 4In , Tap, Hand, Hss Ground, Npt, 3 / 8In , Tap, Rh Npt, Hss, 1 / 2In , Spanner, Non-Spark, 34, 41, 46, 50, 60, 80 Mm , Spanner, Non-Spark, 46, 50, 60, 65, 76, 80 Mm , Allen Key, Ns, Cu-Ti, 1.5 To 22Mm , Pipe Wrench ( Small ) Ns, Cu-Ti, 50X350 , Pipe Wrench ( Big ) Ns, Cu-Ti, 75X600mm , Hammer, Brass, 0.5 Kg , Hammer, Brass, Wood Hndl, 10Kg , Socket Set, Ns, Point.12, Sae, 5 / 16-1 1 / 4In , Scrapper, Flat, Non Sparking, 2 Inch , Scrapper, Flat, Non Sparking, 4 Inch , Punch, Non-Sparking, 16Mm, 150Mm, Hole , Non Sparking Centre Punch , Reversible Ratchet Handle Ns, Cu-Ti, 1 / 2In , Wedge Ns, Cu-Ti, 30X20x200mm , Universal Magnetic Stand , Belt Tension Gage 0-50Lb , Protector, Bevel-Universal, 150 / 300Mm , Master Level, Acuracy 0.02Mm In1mtr, 150Mm , Granite Surface Plate, 1.6X1.0Mx0.2 Mtr , Wrench, Impact, Pneumatic, Sq.Drive, 1In , Grinder, Angle, 100Mm , Nut Spltr With Hydraulic Cylder-24-32Mm , Nut Spltr With Hydraulic Cylder-32-41Mm , Brg, Puller, Manual, 2.5Ton, 3 Jaw, 80-100Mm , Hyd, Brg, Puller With Pump, 20Ton, 2 & 3 Jaw , V-Block, 150 X 100 X 100 Mm W / Clamp , Brush, Wire, Ss , Portable Grease Gun, Hand Operated , Hammer, Brass, 1 Kg , Hammer, Brass, 2.5Kg , Hammer, Brass, 5Kg , Hammer Sledge, 7200 Grams , Mallet , Jack, Hyd, 5 Ton , Punch And Chisel Set , Drill M / C, Impact, Ele, 13Mm, Bosch, Gsb 13Re , Grinding M / C, Pneumatic, 2200Rpm, 1 / 4Inpt , Drill, Twist, Straight Shank, 12Mm , Drill, Twist, Straight Shank, 14Mm , Drill, Twist, Straight Shank, 16Mm , Drill, Twist, Straight Shank, 18Mm , Drill, Twist, Straight Shank, 20Mm , Brush, Wire, Brass , Grinding Wheel, 4In , Cutting Wheel, 63X2.5X10mm , Cutting Wheel, 100X4x12.7Mm , Al Tape W / Adhesive, 2In Wide
