Retrofitting Of Piped Water Supply Scheme At Gavadi Tal Shahuwadi ,Dist Kolhapur.
Tender Value
39.50 Lakhs
Estimated cost
Bid Submission
17 Oct 2022
0 days left
EMD
39509
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shahuwadi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting Of Piped Water Supply Scheme At Gavadi Tal Shahuwadi ,Dist Kolhapur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2022 | Technical Bid and Corrigendum Type Date | Date | 17-Oct-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Subwork No. 1 :- Strengthening Of RCC JackwellDesilting the supply well, intake well , sump of water supply / sewerage work etc. in wet or dry condition including lifts up to 9 m and lead up to 150 m as required beyond the work site , stacking , spreadingincluding necessary guarding etc. complete. as directed by Engineer in charge. Lift 9.00 - 10.50 m |
| 2 | Lift 10.50 - 12.00 m |
| 3 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. PCC Below Beam in C.C. M - 150 |
| 4 | Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) in RCC M-250.RCC for Beam in C.C.M - 25 |
| 5 | Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) in RCC M-250.a) For wall, (M-25) |
| 6 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). |
| 7 | Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anti- corrosive paint, etc. complete as directed by Engineer-in-charge. |
| 8 | Dewatering the excavated trenches and pools of water in Sthe building trenches /pipeline trenches, well works by using pumps and other devices including disposing off the water to safe distance as directed by Engineer-in-charge etc. complete. |
| 9 | Providing and fixing 80mm dia. A.C./P.V.C. pipe weep holes at 1.5 M c/c staggered including cost of all materials and labour involved with all loads and lifts, etc. complete. |
| 10 | Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases, mild steel plates,angles, brackets, cleats, gusset plates,anchor bolts, etc. as per detailed design and drawing or as directed by Engineer in charge including cutting, fabrication,hoisting, erecting, fixing in position,making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete.. |
| 11 | Subwork No. 2 -Pumping Machinery Providing erecting and giving test of 150 mm dia. SubmersiblePump sets conforming to IS 8034/76 and motor conforming to IS9283. Pump shall be suitable for various deliveryhead and discharge with stainless steel pump shaft and Bronze impeller.Motor suitable for working on 415 V+10%, 3Ph,50 Hz., A.C. supply with Cable guard, water lubricated bearings to entire hydraulic thrust, waterproof winding shall be provided. The pump set shall be suitable for direct coupled to the motorPump shall have suitable outlet as per manufactures design. Suitable suction strainer shall also be provided, 3 core, single/double run copper conductor submersible type flat cable 3mshall be provided along with the pump 3.00 HP 8 StageHead - 42 m Discharge - 4100 LPH Upto 8 stage |
| 12 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per IS-1239/2004.50 mm Dia |
| 13 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete. |
| 14 | Suppying & erecting flat flexible 3 core PVC sheathed submersiable type copper cable suitable clampped at fixed intercals with cable clips on drop pipe as comp.( 3 core 4 sqmm.) |
| 15 | Supplying and erecting panel board this includes following items.(1) Triple pole switch, (2) water level guard,(3) Voltmeter,(4) Amperemeter,(5) Sets of pilot lamp,(6) Starter DOL/Star Delta,(7) Capacitor,(8) Sector Switch,(9) Earth Leakage Circuit Breaker(ELCB),(10) M.S. Sheet Box,(11) T.W. planks,(12)Iron panel board, (13) G.I. sheet caution board,(14) self lock etc.complete. |
| 16 | Supplying and erecting Galvanized cast iron earth plate size 60X60X0.60 cm. Buried in specifically prepared earth pit (top edge of the plate 1.50 m. below ground level) refilling with 30 Kg charcoal and salt in alternate layers, necessary length of doubleG.I.earth strip connected to the plate with cadmium plate G.I. nut bolts 12 mm. Dia. With bituminous compound and connected to the nearest switch gear end socket as per direction and duly tested by earth tester and recording the results, supplying and erecting 19 mm. dia. Vertical G.I. pipe 1.5 M. long with funnel and mesh at top is included in the scope of work. |
| 17 | Providing cable jointing kit withcablejointing compound and materials for various size cables from 1.5 mm. to 35 mm. cable soldering etc. complete. For requirement of cable of size 300 mm. and above single core cable shall preferably be used. |
| 18 | Providing, supplying and erecting triple super type chainpullyblock suitableforcapacity 1.00 MT with6.00 M liftcomplete withloadchain &handchain,tested to 50 % load asperI.S.3832 carringISI mark |
| 19 | Subwork No. 3: Four Pole StructureExcavationfor foundation / pipe trenches in earth soils of all typessandgravel and soft murum including removing the excavated material upto a distance of 50 m and lift as below , stacking and spreading as directed, normal dewatering preparing the bed for foundation excluding backfilling etc. complete. |
| 20 | Providing dry trap/ granite / quartzite / gneiss rubble stone soling in 15 cm to 20 cm laters including hand packing and compacting etc complete. |
| 21 | Providing & laying in situ M-150 grade of CC of trap/granite/quartzite/gneiss metal for foundation & bedding including bailing out water ,formwork compacting & curing finishing etc. complete. |
| 22 | Providing structural steel work in in single stanchions composed of RSJ ,Channel etc, with caps , bases, cleats , gussets plates, anchor bolts .. etc. as per detailed design and drawings or as directed by Engineer in charge including cutting,fabricating, hoisting, reecting,fixing in position , making riveted / bolted / weldedconnectionsand one coat of anticorrosive plant and over it two coats or oil painting of approved quality and shade. |
| 23 | Providing and fixing in position M.S. ladder 0.50 m wide consisting of 75 x 10 mm M.S. flats as stringer and 16 mm dia. M.S. bar in double rows as step a placed at 25 cm c/c including cost of material and labour involved welding anchoring and applying 3 coat’s of anti corrosive paint etc. complete. |
| 24 | Providing and fixing steel frame door of angle 40 x 40 x 5 mm with 16 mm dia. mild steel bars horizontally at 10cm c/c for ventilator portion including iron hold fast for the fixing shutters including welding, painting, finishing etc. complete |
| 25 | Providing and fixing Indian teak wood planking 50 mm thick for flooring plained on both sides, tongued and grooved including scaffolding, if necessary, and one coat of primer etc. complete |
| 26 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts,lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). |
| 27 | PROCIDING & FIXING G. I . Pipe railing having 1.00 meter height consisting 50 x 50 x 6 mm thick in ms angels as vertical at 1.5 m, c/ & additional post at every corner with 3 rows of 25 m.m diaG. I. Pipe of medium class variety as horizontal & painting 3 coats of oil paint over 1 coat of anticorrosive paint of apporved colour and shadeincluding cost of all labour transportatipon bendsto curved shape etc complete., |
| 28 | SubworkNo 4 -Rising Main 90 mm Dia HDPE 6 Kg/cm2 Length - 610 m - For Marale - DabholkarwadiExcavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removingthe excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete. |
| 29 | Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete., |
| 30 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 31 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 M from the area and lifts as below, normal dewatering, excluding back filling etc complete. |
| 32 | Filling in plinth ad floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete. |
| 33 | Providing and supplying in standard lengths ISI mark rigid unplasticised HDPE pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).. Working Pressure 10 & 6 Kg./Sq.cm90 MM DIA6 KG / SQCMHDPE PIPE |
| 34 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per 80 mm dia GIPipe Medium |
| 35 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm dia PN 1. |
| 36 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading fromrailway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.80 mm Non Return Valve PN-1 |
| 37 | Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including inspection charges, transportation to departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.40 mm dia Pressure Relief valves Type - PN - 1 |
| 38 | Providing and supplying Air Valves as per IS-14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance,third party inspection charges, loading, unloading,transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. 25 mm Dia. PN - 1 Single ball |
| 39 | Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete.Couplers -90 mm Dia |
| 40 | Elbow 90 Deg. 90 mm Dia |
| 41 | Ferrule Tapping tee 90 x 1\" |
| 42 | Elbow 45 Deg. 90 mm Dia |
| 43 | 90 mm DiaLNPE |
| 44 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (With cement solvent joint / ring fit joint).Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour,operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.working Pressure 10 & 6 Kg/Sqcm.90 MM DIA6 KG / SQCMHDPE PIPE |
| 45 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete either underground or in vertical position, as directed by Engineer-in-charge Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion. 65 mm dia80 mm dia GIPipe Medium |
| 46 | Lowering, laying and jointing in position following C.I. D/F Reflux vales, Buttefly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves) 80 mm dia . |
| 47 | Lowering, laying and fixing in proper aligement and position all types ofC.I. Air Valves as directed by engg.in charge including cost of conveyance from stores site of work cost of material and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves). Type - PN - 125 mm dia. Single Ball |
| 48 | Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including all cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all class of valves.). 40 mm dia. |
| 49 | Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 50 | Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.For Casing Collar joints class NP - III, 200 mmCollar joints class NP - III, 200 mm |
| 51 | Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar joints class NP - III, 200 mm |
| 52 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete. |
| 53 | Sub Work :No. 5 : - Construction of RCCGSR -Capacity 10000 Litres - For DhangarwadaProviding and casting in situ C.C. of trap / granite / gneiss metal of approved quality for P.C.C. works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, from work, compaction, finishing the formed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary of roughening if special finish is to be provided and curing etc. complete. ( Excluding Reinforcement.)P.C.C. 1:2:4--- Bed Concrete. M:150 |
| 54 | Providing uncoursed rubble masonry of trap/granite/ quartzite/gneiss stones in cement mortar 1:6 insuperstructure including raking out joints when plastering is to be done / strking joints when no plastering is to be done watering scffolding complete. |
| 55 | Designing ( aesthetically), andconstructing RCCground service reservoirs / RCCsumps in M-300mix. Of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab /or dome, 20 mm. thick cement plaster with water proofing compound in CM 1:3proportion to inside face of the container, including expoxy paint from inside including refilling anddisposing of surplus stuff within lead of 50 m. all labourand material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangedment consisting of C I. M.S. D/F.pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside andoutside , C I. manhole frame and cover, water top slab, B B, masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code andproviding three coats of cement paint to all exposed surface of structure including roof surface etc.complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termitetreatment shall be givenforunder ground portionof the structure.Capacity20,000 Lits.For PandharewadiNotes :-1) The design shall be in accordance with various relevant l.S. specification (l.S. 456/1978, l.S. 875 - 1987, l.S. 3370 -1965 or revised. 2) Only M.S. bars grade I conforming to l.S. 432 part-I or high yield strength deformed bars conforming to l.S. 1786 or l.S. 1139 shall be used. Grade -II M.S. bars shall not be used. 3) Entire structure shall be in M-300 onlv. 4) The scope of pipe assembly work shall be upto 5 metre beyond outside face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 5) The G.S.R. I Sump above 15 lakh litres capacity shall be in two compartment. 6) The Job includes designing the structure forupliftpressureanddewateringif requiredduringentireexecutionand disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer- in-charge. If uplifts considered in design, then these rates shall be increased by 7.5%. 7) G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom. 8) For pipe diameters upto 300 mm only Cl pipes and Cl specialsshall be used. For pipe diameters above 300 mm, M.S. pipes and specials minimum 10 mm thick shall be used with properanticorrosive epoxy treatment from inside and outside. 9) Costofpumphouseisnotincludedin these rates. 10) AboveratesareapplicableforSeismic Zones 23 and 4. 11) 75% part rate shall be payable for reinforcement, concrete andplastering items of all types of G.S.R.s and sumps till satisfactory hydraulictestingforwater tightnesstestis givenand tillthat work shall be treated as incomplete. Note: ConditionsfromSr.No.1 to11 shall form a part and parcel of tender and mustbeincluded inthedrafttender papersforworkofR.C.C.GSRsand sumos. |
| 56 | Providing ISI mark G.I. pipe of following class and dia. Including all statutary duties and taxes such as GSt levied by GOl and GOM in all respect, inspection charges, transportation to stores, etc. complete80 mm dia GIPipe Medium |
| 57 | Providing, double flanged Sluice valve conforming in IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle,capsincluding all taxes transportation etc.complete . 80 mm sluice valves - PN - 1. |
| 58 | Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint ( Shalimar,Ciba or Mahindra and Mahindramake ) from inside and outside including all statutary duties and taxes such as GST levied by GOl and GOM in all respect inspection charges, transportation to stores / site, and stacking, etc. complete.80 mm to 300 mm |
| 59 | Sub Work No6 :-Distribution system Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removingthe excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete. |
| 60 | Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete., |
| 61 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M |
| 62 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete.by all means. |
| 63 | Filling in plinth ad floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete. |
| 64 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 4 Kg./Sq.cm110 mm dia PVC 4 Kg/cm2 |
| 65 | 90 mm dia PVC 4 Kg/cm2 |
| 66 | 75 mm dia PVC 4 Kg/cm2 |
| 67 | Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per IS-1239/2004.100 mm dia GIPipe Medium |
| 68 | 80 mm dia GIPipe Medium |
| 69 | 65 mm dia GIPipe Medium |
| 70 | Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. complete.100 mm dia PN 1 |
| 71 | 80 mm dia PN 1 |
| 72 | 65 mm dia PN 1 |
| 73 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, etc.complete (With cement solvent joint / ring fit joint).Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour,operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.working Pressure 4 Kg/Sqcm.110 mm dia PVC 4 Kg/cm2 |
| 74 | 90 mm dia PVC 4 Kg/cm2 |
| 75 | 75 mm dia PVC 4 Kg/cm2 |
| 76 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete either underground or in vertical position, as directed by Engineer-in-charge Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.100 mm dia GIPipe Medium |
| 77 | 80 mm dia GIPipe Medium |
| 78 | 65 mm dia GIPipe Medium |
| 79 | Lowering, laying and jointing in position following C.I. D/F Reflux vales, Buttefly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves)Giving satisfactory Hydraulic testing of following C.I.D./F Reflux valves,Butterfly valves and Sluice Valves.100 mm dia PN 1 |
| 80 | 80 mm dia PN 1 |
| 81 | 65 mm dia PN 1 |
| 82 | Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.For Casing Collar joints class NP - III, 200 mm |
| 83 | Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar joints class NP - III, 200 mm |
| 84 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 0.90 x 0.60 m internal size depth upto 1.2 m with precast RCC slab cover |
| 85 | Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete.100 mm x 225 mm (20 kg) |
| 86 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
| 87 | Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 88 | Subwork No 7 :-RUNNING THE SCHEME (FOR ONE MONTH)Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge.Note : Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department.a) For single village ( One Month ). |
| 89 | Add GST 12% |
AI Tender Summary
Tender Timeline
Oct 14, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 17, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender