Work Of Cement Concrete Paving For Biomass Shed And Approach At Coal Handling Area At Ptpp, Parichha- 1 Providing And Laying Design Mix Cement Concrete Of M-30 Grade, In Roads / Taxi Tracks / Runways, Using Cement Content As Per Designmix, Using Co, parichha-Uttar Pradesh

Work Of Cement Concrete Paving For Biomass Shed And Approach At Coal Handling Area At Ptpp, Parichha- 1 Providing And Laying Design Mix Cement Concrete Of M-30 Grade, In Roads / Taxi Tracks / Runways, Using Cement Content As Per Designmix, Using Coarse Sand And Graded Stone Aggregate Of 40 Mm Nominal Size In Appropriate Proportions As Per Approved & Specified Design Criteria, Providing Dowel Bars With Sleeve / Tie Bars Wherever Required, Laying At Site, Spreading And Compacting Mechanically By Using Needle And Surface Vibrators, Levelling To Required Slope / Camber, Finishing With Required Texture, Including Steel Form Work With Sturdy M.S. Channel Sections, Curing, Making Provision For Contraction / Expansion, Construction &Longitudinal Joints ( 10 Mm Wide X 50 Mm Deep ) By Groove Cutting Machine, Providing And Filling Joints With Approved Joint Filler And Sealants, Complete All As Per Direction Of Engineer-In-Charge ( Item Of Joint Fillers, Sealants, Dowel Bars With Sleeve / Tie Bars To Be Pai Separately ) . Cement Concrete Prepared With Batch Mixing Machine 2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing Andreinforcement - All Work Up To Plinth Level : 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) 4 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30Cm In Depth. 1.5 M In Width As Well As 10 Sqm On Plan ) Including Disposal Ofexcavated Earth, Lead Upto 50M And Lift Upto 1.5M, Disposed Earth To Be Levelled And Neatly Dressedall Kinds Of Soil 5 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level Cold Twisted Bars 6 Engaging Jcb / Hydra Machine On Hire Bases Including Hire Fuel Driver Helper Etc. Complete. 7 Carriage, Laying , Spreading And Compaction Of Coal Boulders From Coal Handling Plant Of Ptpp Including Spreading In Uniform Thickness, Hand Picking, Rolling With Three Wheeled Road / Vibratory Roller 8-10 Tonne In Stages In Proper Grade. 8 Brick Work With Non Modular Fly Ash Bricks Conforming To Is:12894, Class Designation 10 Average Compressive Strength In Super Structureabove Plinth Level Up To Floor V Level In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 9 Brick Work With Fly Ash ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 10 12 Mm Cement Plaster Of Mix : 1:6 ( 1 Cement: 6 Fine Sand ) 11 Cartage Of Malwa By Tractor Trolly Upto Distance Of 5 Km From Periphery Of Area Cleared Including Cost Of All Labour , T&P Suchas Loading Unloading And Cartage For Proper Completion Of Work. 12 Providing And Fixing In Position Pre-Moulded Joint Filler In Expansion Per Cm Joints. 13 Providing And Laying In Position Bitumen Hot Sealing Compound For Expansion Joints Etc.Using Grade A Sealing Compound 14 Supplying And Filling In Plinth With Jamuna Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete.

INR 1180 /-

INR 73000.0 /-

INR 36.43 Lakhs /-

Name of Work:Work of cement concrete paving for biomass shed and approach at coal handling area at PTPP,Parichha

Sl. No.	Item Description
1	Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per designmix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/camber,finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction &longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be pai separately). Cement concrete prepared with batch mixing machine
2	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
4	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressedAll kinds of soil
5	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
6	Engaging JCB/Hydra machine on hire bases including hire fuel driver helper etc. complete.
7	Carriage, laying , spreading and compaction of coal boulders from coal handling plant of PTPP including spreading in uniform thickness, hand picking, rolling with three wheeled road /vibratory roller 8-10 tonne in stages in proper grade.
8	Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)
9	Brick work with fly ash(non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
10	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
11	Cartage of malwa by tractor trolly upto distance of 5 km from periphery of area cleared including cost of all labour ,T&P suchas loading unloading and cartage for proper completion of work.
12	Providing and fixing in position pre-moulded joint filler in expansion per cm joints.
13	Providing and laying in position bitumen hot sealing compound for expansion joints etc.Using grade "A" sealing compound
14	Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.